Model · MHC2 Series Pneumatic Grippers
MHC2 Series Pneumatic Grippers
The MHC2 series consists of angular pneumatic grippers with two fingers that pivot open and closed around a fulcrum. They are suitable for gripping, turning and holding workpieces in position. Four bore sizes are available: 10, 16, 20 and 25mm. The grippers are available in double-acting (D) and single-acting (S) versions. Double-acting models open and close by alternately supplying air to ports on either side, while single-acting models use spring return. The operating medium is compressed air filtered through a 40μm or finer filter. The operating pressure range is 0.1~0.6MPa, the ambient temperature range is -10~60℃ (no freezing), and the maximum operating frequency is 180c.p.m. Opening and closing angle repeatability is ±0.01. Lubrication is not required; if lubrication is desired, ISO VG32 turbine oil No. 1 may be used. Effective gripping torque at 0.5MPa ranges from 0.10~1.36N·m, with corresponding opening and closing angles of 39°~316°; larger bores provide greater gripping torque and angles. Optional 3-wire or 2-wire solid-state magnetic switches, such as D-M9BL, can detect the open and closed positions. Mounting can be accomplished using either threaded holes or through-holes, but not both at the same time.
Overview
The MHC2 series consists of angular pneumatic grippers with two fingers that pivot open and closed around a fulcrum. They are suitable for gripping, turning and holding workpieces in position. Four bore sizes are available: 10, 16, 20 and 25mm. The grippers are available in double-acting (D) and single-acting (S) versions. Double-acting models open and close by alternately supplying air to ports on either side, while single-acting models use spring return. The operating medium is compressed air filtered through a 40μm or finer filter. The operating pressure range is 0.1~0.6MPa, the ambient temperature range is -10~60℃ (no freezing), and the maximum operating frequency is 180c.p.m. Opening and closing angle repeatability is ±0.01. Lubrication is not required; if lubrication is desired, ISO VG32 turbine oil No. 1 may be used. Effective gripping torque at 0.5MPa ranges from 0.10~1.36N·m, with corresponding opening and closing angles of 39°~316°; larger bores provide greater gripping torque and angles. Optional 3-wire or 2-wire solid-state magnetic switches, such as D-M9BL, can detect the open and closed positions. Mounting can be accomplished using either threaded holes or through-holes, but not both at the same time.
Product category: Pneumatic components/Pneumatic grippers/Pivoting type
Models & specifications
| Model / Name | Action type | Bore (mm) | Clamping torque (Nm) | Opening angle deg |
|---|---|---|---|---|
| MHC2-10D MHC2-10D Angular Pneumatic Gripper (10mm bore, double-acting) | 双作用式 | 10 | 0.1 | 39 |
| MHC2-16D MHC2-16D Angular Pneumatic Gripper (16mm bore, double-acting) | 双作用式 | 16 | 0.39 | 91 |
| MHC2-20D MHC2-20D Angular Pneumatic Gripper (20mm bore, double-acting) | 双作用式 | 20 | 0.7 | 180 |
| MHC2-25D MHC2-25D Angular Pneumatic Gripper (25mm bore, double-acting) | 双作用式 | 25 | 1.36 | 316 |
| MHC2-10S MHC2-10S Angular Pneumatic Gripper (10mm bore, single-acting) | 单作用式 | 10 | 0.1 | 39 |
| MHC2-16S MHC2-16S Angular Pneumatic Gripper (16mm bore, single-acting) | 单作用式 | 16 | 0.39 | 91 |
| MHC2-20S MHC2-20S Angular Pneumatic Gripper (20mm bore, single-acting) | 单作用式 | 20 | 0.7 | 180 |
| MHC2-25S MHC2-25S Angular Pneumatic Gripper (25mm bore, single-acting) | 单作用式 | 25 | 1.36 | 316 |










