Parallel Opening and Closing Type

MCHA Series Pneumatic Gripper

MCHA Series Pneumatic Gripper

MHS4 Series Pneumatic Grippers

MHS4 Series Pneumatic Grippers

The MHS4 series pneumatic gripper is a multi-jaw actuator with synchronized opening and closing. Compressed air drives a reciprocating piston, which moves the jaws along guide rails in unison to grip, position, sort and handle workpieces. It is commonly used in robot end-of-arm tooling, assembly lines, loading and unloading, and inspection stations. The body is typically made of anodized aluminum alloy, while the jaws and piston rod are stainless steel. A built-in magnetic ring allows magnetic sensors to detect the fully open and closed positions. The series is available in five bore sizes: Φ25, Φ32, Φ40, Φ50 and Φ63. Models are designated MHS4-Φ[bore diameter]D; larger bores provide greater gripping force. Mounting holes vary by bore size: Φ25 has 2-Φ3.4 through holes with Φ6.5 counterbores, 10 deep; Φ32 has 2-Φ4.5 through holes with Φ8 counterbores, 9 deep; Φ40 has 2-Φ5.5 through holes with Φ9.5 counterbores, 14 deep; and Φ50 and Φ63 both have 4-Φ5.1 through holes with Φ9.5 counterbores, 12 deep. Dowel pin holes on the bottom of the body enable precise positioning during repeated removal and reinstallation.

HFCIYIX Series Pneumatic Grippers (Parallel Opening and Closing / Cylindrical Body)

HFCIYIX Series Pneumatic Grippers (Parallel Opening and Closing / Cylindrical Body)

The HFCIYIX series consists of parallel-opening pneumatic grippers with a cylindrical body. A double-acting cylinder drives the two jaws to open and close in parallel, keeping them aligned throughout their travel. Suitable for gripping square, round, and irregularly shaped workpieces, these grippers are widely used on automated production lines, as robotic end effectors, and at loading, unloading, and assembly stations. The cylindrical body facilitates recessed mounting and multidirectional piping, while jaw attachments can be added to accommodate different workpiece shapes. Selection criteria typically include bore size, opening and closing stroke, gripping force, repeatability, operating pressure range, maximum operating frequency, port size, and mounting dimensions. This page is only the catalog cover or title page for the series; detailed specifications, external dimensions, and model numbering rules are not provided.

HMF Series Wide-Body Air Gripper (Parallel Opening and Closing)

HMF Series Wide-Body Air Gripper (Parallel Opening and Closing)

The HMF series is a wide-body parallel air gripper. Its two fingers move synchronously toward or away from each other in a straight line, providing a wide gripping surface and rigid guidance. It is suitable for gripping wide workpieces or those requiring a longer gripping surface. For the same stroke, the wide body provides a larger mounting reference surface and greater resistance to off-center loads. Two-finger, three-finger and other multi-finger configurations are available, along with various jaw attachments, for automated assembly, handling and positioning. Key selection criteria include bore size (gripping force), opening and closing stroke, repeatability, operating pressure, actuation type (single-acting/double-acting), and accessories such as magnetic switches and jaw attachments. Note: The catalog table on this page is blank and does not provide specific models, dimensions or parameters. Refer to the complete catalog page for specifications.

HFZ Series Pneumatic Grippers

HFZ Series Pneumatic Grippers

The HFZ series consists of parallel-opening pneumatic grippers available in three action types: HFZ standard double-acting, HFZ single-acting normally open, and HFSZ single-acting normally closed. Seven bore sizes are available: Φ6, Φ10, Φ16, Φ20, Φ25, Φ32, and Φ40. Effective gripping force ranges from approximately 6.1~320 N, with closing strokes across both jaws of 4/4/6/10/14/22/30 mm, respectively. Gripping force and stroke increase with bore size. Three body mounting styles are available: standard (Φ6, Φ10~Φ40), F side-mount (Φ6, Φ10, Φ16~Φ40), and N through-hole mount (Φ6, Φ10, Φ16~Φ40), allowing side or through-hole installation in confined spaces. Model numbers consist of an action-type prefix (HFZ / HFSZ) followed by the bore size, with suffix F indicating side mounting and N indicating through-hole mounting. The grippers are suitable for gripping, positioning, and transferring small workpieces on automated production lines in electronics, semiconductors, packaging, automotive components, and other industries.

HFZ/HFSZ Series Pneumatic Grippers

HFZ/HFSZ Series Pneumatic Grippers

HFZ/HFSZ series pneumatic grippers are used to grip and hold workpieces in automated equipment. They are available in three configurations: HFZ standard double-acting, HFZ single-acting normally open, and HFSZ single-acting normally closed. Bore sizes are 6, 10, 16, 20, 25, 32, and 40 mm. Mounting options include standard, side mounting (F type), and through-hole mounting (N type). The catalog lists parameters such as effective support force, closing stroke, and weight for each bore size. These grippers are suitable for tooling, handling, and positioning applications requiring compact two-finger gripping. Models include HFZ10, HFZ16, HFZ20, HFZ25, HFZ32, and HFZ40. Select a model based on bore size, operating configuration, mounting method, and required gripping force.

HFP Series Pneumatic Gripper (Mechanical Parallel Type)

HFP Series Pneumatic Gripper (Mechanical Parallel Type)

The HFP series pneumatic gripper (mechanical parallel type) is a double-acting parallel gripper powered by compressed air and requires no lubrication. It has an operating pressure range of 0.1~0.7MPa, an ambient temperature range of -10~+60℃, and repeatability of ±0.05mm. Five bore sizes are available: 10, 16, 20, 25, and 32, each with a choice of long, medium, or short opening and closing strokes. Compared with the MH22 series, its height is reduced by approximately 1/3, its moment is lower, and its rigidity is increased. The finished product ordering code is HFP+bore size+option (e.g., HFP20□). Dimensions for the single-acting type are shown in parentheses. It is suitable for automated handling, gripping, and similar applications.

HFT Series Wide-Opening Grippers

HFT Series Wide-Opening Grippers

The HFT series wide-opening gripper is a pneumatically driven parallel gripper. A cylinder drives the jaws to grip workpieces over a wide opening and long stroke, making it suitable for picking up and positioning larger workpieces. Five bore sizes are available: 10, 16, 20, 25 and 32. The number after × in the model designation indicates the gripping stroke, ranging from 20~250mm, with configurations from HFT10×20 to HFT32×250. During operation, ensure that the gripping point distance R is within the effective gripping force curve for the corresponding air pressure, and allow a gripping force margin based on the workpiece weight. Jaw attachments should be as light and short as possible to prevent excessive opening and closing inertia from reducing service life. Select locking screws from M4×0.7, M5×0.8, M6×1.0 and M8×1.25 according to the model. Tighten them to the specified maximum tightening torque, install jaw attachments with the piston rod retracted, and fit a drop-prevention device to prevent injury from falling workpieces.

MHS Series Parallel Pneumatic Grippers

MHS Series Parallel Pneumatic Grippers

The MHS series of parallel-opening pneumatic grippers includes the MHS3 three-finger and MHS4 four-finger configurations, with bore sizes of 16, 20, 25, 32, 40, 50 and 63mm. A parallel opening and closing mechanism synchronizes the fingers, providing stable gripping force and high repeat positioning accuracy. These grippers are suitable for automated workpiece handling, transfer, positioning and assembly. The operating pressure is 0.2~0.6MPa for the 16mm bore and 0.1~0.6MPa for bore sizes of 20mm and above. Models are designated as “MHS3/MHS4-bore size D”, allowing selection by finger count and bore size. Magnetic switches can also be fitted to detect open and closed positions.

HFC Series Pneumatic Gripper (Parallel Opening and Closing)

HFC Series Pneumatic Gripper (Parallel Opening and Closing)

The HFC series is a double-acting pneumatic gripper with parallel opening and closing. It uses air as the working medium, filtered through a screen rated 40μm or greater. Operating pressure is 0.2~0.7MPa, operating temperature is -20~70℃, repeatability is ±0.01mm, maximum operating frequency is 120 cycles/minute, and the port size is M3×0.5. The compatible sensor switch is DS1-H. All models have a built-in magnet and a standardized internal structure for high gripping force. A cushion at the front of the piston reduces impact noise during gripping, while locating pin holes on the bottom improve mounting accuracy and positioning consistency during repeated removal and reinstallation. Three-jaw (Y) and four-jaw (X) configurations are available, with bore sizes of 16, 20, 25, 32, 40, 50, 63, 80, and 100mm. The grippers are suitable for handling workpieces of various shapes in automated equipment.

HFC1 Series Pneumatic Gripper

HFC1 Series Pneumatic Gripper

The HFC1 series pneumatic gripper (parallel pneumatic gripper) features a dual-piston design with good resistance to bending and torsion, allowing it to withstand substantial dynamic and lateral loads. Bore sizes are 10, 16, 20, 25, 32, 40, 50, and 63 mm. The working medium is air, with an operating pressure range of 1.0~9.0 kgf/cm², a proof pressure of 13.5 kgf/cm², an operating temperature of -20~70℃, a speed range of 30~500 mm/s, a stroke tolerance of -1.0 mm, a non-rotation angle of ±0.1°, and a port size of M5×0.8. Rear mounting and front through-hole mounting are supported. Impact pads or hydraulic shock absorbers at both ends reduce impact speed and extend service life. With high-temperature seals, the gripper can operate at 150℃. During installation, select bolts appropriate for the bore size and keep the tightening torque within the specified range: excessive torque can cause malfunction, while insufficient torque can cause misalignment and detachment.

HMHZJ2 Series Parallel Pneumatic Grippers with Dust Cover

HMHZJ2 Series Parallel Pneumatic Grippers with Dust Cover

The HMHZJ2 series consists of parallel pneumatic grippers with dust covers and a two-jaw parallel opening and closing mechanism. They are suitable for harsh conditions involving dust and cutting fluid splashes. Bore sizes are 6, 10, and 16 mm, with double-acting (D), single-acting normally open (S), and single-acting normally closed (C) options. Dust covers are available in butadiene rubber (CR, labeled as argon butadiene rubber in the original), fluoroelastomer (FKM), and silicone rubber (Si), to suit oil resistance, chemical resistance, or temperature requirements. Magnetic switches such as the A93 can be fitted to detect open and closed positions. The series is commonly used for automated assembly, gripping, and handling.

HMMHZ2 Series Parallel Pneumatic Gripper

HMMHZ2 Series Parallel Pneumatic Gripper

The HMMHZ2 series parallel pneumatic gripper features two fingers that open and close in sync for centered, parallel gripping and handling of workpieces. Four action types are available: D double-acting, S single-acting (normally open), C single-acting (normally closed), and N blank. Finger options include 1 side threaded-hole mounting, 2 through-hole mounting in the opening and closing direction, 3 flat fingers, and 4 no fingers (blank type). These options can be combined to suit the application. The body has mounting positions for optional magnetic switches to detect fully open and closed positions. It is widely used in automated assembly, loading and unloading, sorting, and other applications.

HMS3 Series Pneumatic Grippers (Parallel Opening and Closing)

HMS3 Series Pneumatic Grippers (Parallel Opening and Closing)

The HMS3 series consists of parallel-opening pneumatic grippers with a cylindrical body. A dual-piston or wedge-cam mechanism converts the cylinder's linear thrust into parallel opening and closing motion of the two jaws. The jaws remain parallel throughout their travel, reducing workpiece displacement during gripping and making them suitable for regularly shaped workpieces such as square and cylindrical parts. These grippers are commonly used in automated assembly, handling, loading and unloading, and inspection and positioning. Magnetic switches can be added to detect the fully open and closed positions. The catalog also lists the HMS4 series of parallel-opening grippers with cylindrical bodies on the same page. This related series has the same construction but different body sizes; select between them based on the required gripping force, opening and closing stroke, and body size. Specifications are primarily distinguished by model code. Confirm the bore, gripping force, opening and closing stroke, repeatability, port threads, and other parameters in the relevant specification table.

HMS4 Series Pneumatic Gripper (Parallel Opening and Closing)

HMS4 Series Pneumatic Gripper (Parallel Opening and Closing)

The HMS4 series is a parallel-opening pneumatic gripper with a cylindrical body. Its two jaws open and close in parallel along guide rails to pick and place workpieces on automated production lines, either by gripping their outer surfaces or expanding against their inner surfaces. The jaws remain parallel throughout their travel, providing a large contact area and high centering accuracy. This makes the gripper particularly suitable for regularly shaped workpieces, such as square and cylindrical parts. It can be mounted directly on a robot end flange or fixture. The compact cylindrical body is convenient for confined spaces or installations with multiple grippers arranged side by side. The gripper is typically driven by a double-acting cylinder, with gripping force controlled by adjusting the air supply pressure. Magnetic switches can be added to detect fully open and closed positions, and jaws can be selected to suit the workpiece material and shape. This page provides only the series name and configuration (parallel opening and closing / cylindrical body). Refer to the full catalog page for bore sizes, strokes, gripping forces, repeatability, port threads, and model code combination rules.

MHF2 Series Pneumatic Grippers

MHF2 Series Pneumatic Grippers

MHF2 series pneumatic grippers (parallel grippers) are used to grip, position, and transfer workpieces in automated equipment. Models such as MHF2-8D2, MHF2-12D1, MHF2-16D2, and MHF2-20D1 denote different bore sizes and design variants. Common bore sizes are 8, 12, 16, and 20 mm, with variants identified by codes such as D, D1, and D2. The catalog also provides a standard specifications table and port thread installation notation. The operating pressure is in the 0.15 MPa range. These grippers are suitable for small pneumatic fixtures, assembly lines, inspection stations, and similar applications.

MHL2 Series Pneumatic Parallel Grippers

MHL2 Series Pneumatic Parallel Grippers

The MHL2 series consists of pneumatic parallel grippers with two fingers driven by a common air chamber to open and close in sync, enabling parallel gripping, handling, and positioning of workpieces. The body has mounting holes and locating surfaces for direct attachment to a cylinder, slide table, or robot arm end, while side grooves accommodate magnetic switches to detect the fully open and closed positions. The catalog distinguishes models by bore size and provides dimensional drawings in millimeters for the MHL2-10D and MHL2-20D, with A~H denoting key overall and mounting dimensions such as body width, thickness, finger stroke, and mounting hole spacing. Bore size determines body size and gripping force. Select the bore based on workpiece weight, gripping point overhang, and required gripping force, and use a pressure regulator to control gripping force and prevent damage to thin-walled or fragile workpieces.

MHL2 Series Parallel Pneumatic Grippers

MHL2 Series Parallel Pneumatic Grippers

The MHL2 series consists of parallel-opening pneumatic grippers with dual-piston actuation and a rack-and-pinion mechanism. The two fingers open and close in synchronization, providing high repeat positioning accuracy and strong holding force. The long finger stroke is suitable for gripping larger workpieces. All models have built-in magnets and can be used with magnetic switches to detect fully open and closed positions. Bore sizes are 10, 16, 20, 25 and 32mm. The operating pressure range is 0.15~0.7MPa (22~100psi), proof pressure is 1.2MPa (175psi), operating temperature is -20~70℃, maximum operating frequency is 40 cycles/minute, and the port thread is M5×0.8. The cylinder requires no lubrication. Gripping force varies with bore size; the 32mm bore model provides approximately 228N. These grippers are suitable for parallel gripping of workpieces in automated assembly, handling, sorting and other applications.

MHL2 Series Valve-Type Pneumatic Gripper (Parallel Opening and Closing)

MHL2 Series Valve-Type Pneumatic Gripper (Parallel Opening and Closing)

The MHL2 series is a valve-type pneumatic gripper with two parallel jaws and double-acting operation. Its two fingers open and close synchronously along parallel straight paths to grip, hold, position, and transfer small workpieces. Bore sizes include Φ10, Φ16, Φ20, and Φ40, with two fingers on all models. Each bore size has a corresponding finger stroke, allowing selection based on workpiece size and required opening. Gripping force increases with bore size. Select the bore based on workpiece weight, center of gravity, and required gripping force, and select the opening and closing stroke based on the workpiece shape. The compact body can be operated through direct pneumatic connections and supports side and end mounting. It can be integrated with robotic arms, indexing tables, and conveyor lines in applications such as automated assembly, electronic component assembly, and semiconductor and automotive parts handling.

MHS2 Series Parallel Opening and Closing Air Gripper (Cylindrical Body)

MHS2 Series Parallel Opening and Closing Air Gripper (Cylindrical Body)

The MHS2 series is a parallel opening and closing pneumatic gripper with a cylindrical body, suitable for external and internal gripping. It is available in seven bore sizes: 16, 20, 25, 32, 40, 50, and 63 mm. The operating medium is air; operating pressure is 0.2~0.6 MPa for 16~25 mm bores and 0.1~0.6 MPa for 32~63 mm bores. At 0.5 MPa, external gripping force is 21~502 N and internal gripping force is 23~537 N. Manual stroke is 4~16 mm; maximum operating frequency is 120 cycles/min for smaller bores or 60 cycles/min for larger bores. Port thread is M3×0.5 or M5×0.8. M9P(V), M9N(V), and M9B(V) magnetic switches are available, with lead lengths of 0.5 m (no symbol) or 3 m (L). Gripping point distance: L=20 mm for Φ16~Φ25 and L=30 mm for Φ32~Φ63.

MHS3 Series Parallel Grippers

MHS3 Series Parallel Grippers

The MHS3 series three-jaw parallel gripper uses a double-piston mechanism to open and close its three jaws simultaneously, providing self-centering gripping of cylindrical, square, and other workpieces. Standard bore sizes are 16, 20, 25, 32, 40, 50, 63, 80, and 100mm. The gripper has a cylindrical body with M3×0.5 threaded holes and φ4.5 through-holes with flat-bottom counterbores on the mounting surface, allowing front or side mounting. Magnetic switches, such as the M9N, can be fitted to detect the open and closed positions. Powered by compressed air, the gripper is suitable for handling workpieces in automated assembly, material handling, sorting, and other applications.

MHZ2 Series Miniature Air Grippers

MHZ2 Series Miniature Air Grippers

The MHZ2 series consists of compact pneumatic grippers for gripping, positioning, and handling small workpieces. The series offers double-acting and single-acting configurations. The catalog lists models including MHZAJ2-6D, MHZAJ2-6S, and MHZAJ2-6C, with an effective gripping force of approximately 3.3 N per finger and an opening and closing stroke of approximately 6.1 mm. Reference values for external and internal gripping forces are also provided. The body dimension table covers sizes 10, 16, 20, 25, 32, and 40, showing mounting holes, magnetic switch mounting slots, and major overall dimensions to simplify selection and installation. On single-acting models, the port on one side must serve as a breather port. These grippers are suitable for precision gripping of light loads in electronics, semiconductor, medical, and automated assembly applications.

MHZ2 Series Air Grippers

MHZ2 Series Air Grippers

The MHZ2 series consists of parallel-opening air grippers (pneumatic fingers) with synchronized parallel movement for gripping, holding, positioning, and handling workpieces. Magnetic switches can be fitted for position detection. The series includes the standard MHZ2, compact MHZA2, compact MHZJ2 with dust cover, and long-stroke MHZL2, with bore sizes of Φ6, Φ10, Φ15, Φ20, and Φ25 mm. Actuation options are double-acting D, single-acting normally open S, and single-acting normally closed C. Finger options include basic, side threaded-hole mounting, through-hole mounting in the opening/closing direction, flat fingers, and axial piping (single-acting). Gripper body options include end block with side piping E, end block with Φ4 quick-connect fitting W, end block with axial M5 port M, and end block with axial port and Φ4 hose fitting H. A two-position cam-operated version with 180° opening and closing is also available in bore sizes of 10/16/20/25 mm, for gripping thin workpieces or workpieces requiring a large opening angle.