Model · MHS4 Series Pneumatic Grippers

MHS4 Series Pneumatic Grippers

The MHS4 series pneumatic gripper is a multi-jaw actuator with synchronized opening and closing. Compressed air drives a reciprocating piston, which moves the jaws along guide rails in unison to grip, position, sort and handle workpieces. It is commonly used in robot end-of-arm tooling, assembly lines, loading and unloading, and inspection stations. The body is typically made of anodized aluminum alloy, while the jaws and piston rod are stainless steel. A built-in magnetic ring allows magnetic sensors to detect the fully open and closed positions. The series is available in five bore sizes: Φ25, Φ32, Φ40, Φ50 and Φ63. Models are designated MHS4-Φ[bore diameter]D; larger bores provide greater gripping force. Mounting holes vary by bore size: Φ25 has 2-Φ3.4 through holes with Φ6.5 counterbores, 10 deep; Φ32 has 2-Φ4.5 through holes with Φ8 counterbores, 9 deep; Φ40 has 2-Φ5.5 through holes with Φ9.5 counterbores, 14 deep; and Φ50 and Φ63 both have 4-Φ5.1 through holes with Φ9.5 counterbores, 12 deep. Dowel pin holes on the bottom of the body enable precise positioning during repeated removal and reinstallation.

Overview

The MHS4 series pneumatic gripper is a multi-jaw actuator with synchronized opening and closing. Compressed air drives a reciprocating piston, which moves the jaws along guide rails in unison to grip, position, sort and handle workpieces. It is commonly used in robot end-of-arm tooling, assembly lines, loading and unloading, and inspection stations. The body is typically made of anodized aluminum alloy, while the jaws and piston rod are stainless steel. A built-in magnetic ring allows magnetic sensors to detect the fully open and closed positions. The series is available in five bore sizes: Φ25, Φ32, Φ40, Φ50 and Φ63. Models are designated MHS4-Φ[bore diameter]D; larger bores provide greater gripping force. Mounting holes vary by bore size: Φ25 has 2-Φ3.4 through holes with Φ6.5 counterbores, 10 deep; Φ32 has 2-Φ4.5 through holes with Φ8 counterbores, 9 deep; Φ40 has 2-Φ5.5 through holes with Φ9.5 counterbores, 14 deep; and Φ50 and Φ63 both have 4-Φ5.1 through holes with Φ9.5 counterbores, 12 deep. Dowel pin holes on the bottom of the body enable precise positioning during repeated removal and reinstallation.

Product category: Pneumatic components/Pneumatic grippers/Parallel opening and closing

Models & specifications

Model / NameBore diameter (mm)Counterbore depth (mm)Counterbore diameter (mm)Number of mounting holesMounting hole diameter (mm)
MHS4-Φ25D MHS4 Series Pneumatic Gripper Φ2525106.523.4
MHS4-Φ32D MHS4 Series Pneumatic Gripper Φ32329824.5
MHS4-Φ40D MHS4 Series Pneumatic Gripper Φ4040149.525.5
MHS4-Φ50D MHS4 Series Pneumatic Gripper Φ5050129.545.1
MHS4-Φ63D MHS4 Series Pneumatic Gripper Φ6363129.545.1

Dimensions & drawings

MHS4 Series Pneumatic Grippers — Dimension drawing
MHS4 Series Pneumatic Grippers — Dimension drawing
MHS4 Series Pneumatic Grippers — Dimension drawing
MHS4 Series Pneumatic Grippers — Dimension drawing
MHS4 Series Pneumatic Grippers — Dimension drawing
MHS4 Series Pneumatic Grippers — Dimension drawing

Original catalogs

MHS4 Series Pneumatic Grippers — Catalog page
MHS4 Series Pneumatic Grippers — Catalog page