Model · HFC Series Pneumatic Gripper (Parallel Opening and Closing)
HFC Series Pneumatic Gripper (Parallel Opening and Closing)
The HFC series is a double-acting pneumatic gripper with parallel opening and closing. It uses air as the working medium, filtered through a screen rated 40μm or greater. Operating pressure is 0.2~0.7MPa, operating temperature is -20~70℃, repeatability is ±0.01mm, maximum operating frequency is 120 cycles/minute, and the port size is M3×0.5. The compatible sensor switch is DS1-H. All models have a built-in magnet and a standardized internal structure for high gripping force. A cushion at the front of the piston reduces impact noise during gripping, while locating pin holes on the bottom improve mounting accuracy and positioning consistency during repeated removal and reinstallation. Three-jaw (Y) and four-jaw (X) configurations are available, with bore sizes of 16, 20, 25, 32, 40, 50, 63, 80, and 100mm. The grippers are suitable for handling workpieces of various shapes in automated equipment.
Overview
The HFC series is a double-acting pneumatic gripper with parallel opening and closing. It uses air as the working medium, filtered through a screen rated 40μm or greater. Operating pressure is 0.2~0.7MPa, operating temperature is -20~70℃, repeatability is ±0.01mm, maximum operating frequency is 120 cycles/minute, and the port size is M3×0.5. The compatible sensor switch is DS1-H. All models have a built-in magnet and a standardized internal structure for high gripping force. A cushion at the front of the piston reduces impact noise during gripping, while locating pin holes on the bottom improve mounting accuracy and positioning consistency during repeated removal and reinstallation. Three-jaw (Y) and four-jaw (X) configurations are available, with bore sizes of 16, 20, 25, 32, 40, 50, 63, 80, and 100mm. The grippers are suitable for handling workpieces of various shapes in automated equipment.
Product category: Pneumatic Components/Pneumatic Grippers/Parallel Opening and Closing
Dimensions & drawings





Additional information
















