Model · HFC1 Series Pneumatic Gripper
HFC1 Series Pneumatic Gripper
The HFC1 series pneumatic gripper (parallel pneumatic gripper) features a dual-piston design with good resistance to bending and torsion, allowing it to withstand substantial dynamic and lateral loads. Bore sizes are 10, 16, 20, 25, 32, 40, 50, and 63 mm. The working medium is air, with an operating pressure range of 1.0~9.0 kgf/cm², a proof pressure of 13.5 kgf/cm², an operating temperature of -20~70℃, a speed range of 30~500 mm/s, a stroke tolerance of -1.0 mm, a non-rotation angle of ±0.1°, and a port size of M5×0.8. Rear mounting and front through-hole mounting are supported. Impact pads or hydraulic shock absorbers at both ends reduce impact speed and extend service life. With high-temperature seals, the gripper can operate at 150℃. During installation, select bolts appropriate for the bore size and keep the tightening torque within the specified range: excessive torque can cause malfunction, while insufficient torque can cause misalignment and detachment.
Overview
The HFC1 series pneumatic gripper (parallel pneumatic gripper) features a dual-piston design with good resistance to bending and torsion, allowing it to withstand substantial dynamic and lateral loads. Bore sizes are 10, 16, 20, 25, 32, 40, 50, and 63 mm. The working medium is air, with an operating pressure range of 1.0~9.0 kgf/cm², a proof pressure of 13.5 kgf/cm², an operating temperature of -20~70℃, a speed range of 30~500 mm/s, a stroke tolerance of -1.0 mm, a non-rotation angle of ±0.1°, and a port size of M5×0.8. Rear mounting and front through-hole mounting are supported. Impact pads or hydraulic shock absorbers at both ends reduce impact speed and extend service life. With high-temperature seals, the gripper can operate at 150℃. During installation, select bolts appropriate for the bore size and keep the tightening torque within the specified range: excessive torque can cause malfunction, while insufficient torque can cause misalignment and detachment.
Product category: Pneumatic components / Pneumatic grippers / Parallel opening and closing
Models & specifications
| Model / Name | Action type | Bore (mm) | Operating temperature (°C) | Port size | Proof pressure (kgf/cm²) | Rotation angle (degrees) | Speed range (mm/s) | Stroke tolerance (mm) | Working medium | Operating pressure (kgf/cm²) | Jaw bolt | Jaw tightening torque (Nm) | Mounting bolt | Tightening torque (Nm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HFC1-10 HFC1 Series Pneumatic Gripper, 10 mm bore | 双活塞 | 10 | -20~70 | M5×0.8 | 13.5 | ±0.1 | 30~500 | -1 | 空气 | 1.0~9.0 | ||||
| HFC1-16 HFC1 Series Pneumatic Gripper, 16 mm bore | 双活塞 | 16 | -20~70 | M5×0.8 | 13.5 | ±0.1 | 30~500 | -1 | 空气 | 1.0~9.0 | M3 x 0.5 | 0.59 | M3 x 0.5 | 0.88 |
| HFC1-20 HFC1 Series Pneumatic Gripper, 20 mm bore | 双活塞 | 20 | -20~70 | M5×0.8 | 13.5 | ±0.1 | 30~500 | -1 | 空气 | 1.0~9.0 | M3 x 0.5 | 0.59 | M3 x 0.5 | 0.88 |
| HFC1-25 HFC1 Series Pneumatic Gripper, 25 mm bore | 双活塞 | 25 | -20~70 | M5×0.8 | 13.5 | ±0.1 | 30~500 | -1 | 空气 | 1.0~9.0 | M3 x 0.5 | 0.59 | M3 x 0.5 | 0.88 |
| HFC1-32 HFC1 Series Pneumatic Gripper, 32 mm bore | 双活塞 | 32 | -20~70 | M5×0.8 | 13.5 | ±0.1 | 30~500 | -1 | 空气 | 1.0~9.0 | M4 x 0.7 | 1.4 | M4 x 0.7 | 1.2 |
| HFC1-40 HFC1 Series Pneumatic Gripper, 40 mm bore | 双活塞 | 40 | -20~70 | M5×0.8 | 13.5 | ±0.1 | 30~500 | -1 | 空气 | 1.0~9.0 | M5 x 0.8 | 1.4 | M5 x 0.8 | 1.4 |
| HFC1-50 HFC1 Series Pneumatic Gripper, 50 mm bore | 双活塞 | 50 | -20~70 | M5×0.8 | 13.5 | ±0.1 | 30~500 | -1 | 空气 | 1.0~9.0 | M5 x 0.8 | 1.4 | M5 x 0.8 | 1.4 |
| HFC1-63 HFC1 Series Pneumatic Gripper, 63 mm bore | 双活塞 | 63 | -20~70 | M5×0.8 | 13.5 | ±0.1 | 30~500 | -1 | 空气 | 1.0~9.0 | M6 x 1.0 | 1.7 | M6 x 1.0 | 1.7 |
