Pneumatic Gripper — Page 2

MHC2 Series Pneumatic Grippers

MHC2 Series Pneumatic Grippers

The MHC2 series consists of angular pneumatic grippers with two fingers that pivot open and closed around a fulcrum. They are suitable for gripping, turning and holding workpieces in position. Four bore sizes are available: 10, 16, 20 and 25mm. The grippers are available in double-acting (D) and single-acting (S) versions. Double-acting models open and close by alternately supplying air to ports on either side, while single-acting models use spring return. The operating medium is compressed air filtered through a 40μm or finer filter. The operating pressure range is 0.1~0.6MPa, the ambient temperature range is -10~60℃ (no freezing), and the maximum operating frequency is 180c.p.m. Opening and closing angle repeatability is ±0.01. Lubrication is not required; if lubrication is desired, ISO VG32 turbine oil No. 1 may be used. Effective gripping torque at 0.5MPa ranges from 0.10~1.36N·m, with corresponding opening and closing angles of 39°~316°; larger bores provide greater gripping torque and angles. Optional 3-wire or 2-wire solid-state magnetic switches, such as D-M9BL, can detect the open and closed positions. Mounting can be accomplished using either threaded holes or through-holes, but not both at the same time.

MHF2 Series Pneumatic Grippers

MHF2 Series Pneumatic Grippers

MHF2 series pneumatic grippers (parallel grippers) are used to grip, position, and transfer workpieces in automated equipment. Models such as MHF2-8D2, MHF2-12D1, MHF2-16D2, and MHF2-20D1 denote different bore sizes and design variants. Common bore sizes are 8, 12, 16, and 20 mm, with variants identified by codes such as D, D1, and D2. The catalog also provides a standard specifications table and port thread installation notation. The operating pressure is in the 0.15 MPa range. These grippers are suitable for small pneumatic fixtures, assembly lines, inspection stations, and similar applications.

MHF2 Series Compact Pneumatic Gripper

MHF2 Series Compact Pneumatic Gripper

The MHF2 Series compact pneumatic gripper is an actuator with a parallel-opening and -closing design, intended for gripping and handling workpieces in confined spaces. Its compact construction, reliable operation, and easy installation make it suitable for a wide range of equipment, including automated assembly, packaging, and inspection systems. Typically used with a pneumatic system, the gripper enables fast pickup and release. As the catalog does not provide specific technical data, consult the manufacturer’s detailed specifications for information such as bore size, stroke, and gripping force.

MHL2 Series Round Pneumatic Gripper

MHL2 Series Round Pneumatic Gripper

The MHL2 series round pneumatic gripper (parallel opening and closing type) is a wide pneumatic gripper designed for picking and placing workpieces. The example code on the catalog page contains the segments MHL2, size 16, type D, 1, and Y59A, which can be used to identify the bore or size, construction type, magnetic switch, and other configurations. Common specifications for this series include bore or size, opening and closing stroke, operating mode, port connection, and magnetic switch model. Refer to the complete catalog page for specific stroke, gripping force, operating pressure, and other values. This page provides only the series title and one example code; it does not include the full specification table.

MHL2 Series Pneumatic Parallel Grippers

MHL2 Series Pneumatic Parallel Grippers

The MHL2 series consists of pneumatic parallel grippers with two fingers driven by a common air chamber to open and close in sync, enabling parallel gripping, handling, and positioning of workpieces. The body has mounting holes and locating surfaces for direct attachment to a cylinder, slide table, or robot arm end, while side grooves accommodate magnetic switches to detect the fully open and closed positions. The catalog distinguishes models by bore size and provides dimensional drawings in millimeters for the MHL2-10D and MHL2-20D, with A~H denoting key overall and mounting dimensions such as body width, thickness, finger stroke, and mounting hole spacing. Bore size determines body size and gripping force. Select the bore based on workpiece weight, gripping point overhang, and required gripping force, and use a pressure regulator to control gripping force and prevent damage to thin-walled or fragile workpieces.

MHL2 Series Parallel Pneumatic Grippers

MHL2 Series Parallel Pneumatic Grippers

The MHL2 series consists of parallel-opening pneumatic grippers with dual-piston actuation and a rack-and-pinion mechanism. The two fingers open and close in synchronization, providing high repeat positioning accuracy and strong holding force. The long finger stroke is suitable for gripping larger workpieces. All models have built-in magnets and can be used with magnetic switches to detect fully open and closed positions. Bore sizes are 10, 16, 20, 25 and 32mm. The operating pressure range is 0.15~0.7MPa (22~100psi), proof pressure is 1.2MPa (175psi), operating temperature is -20~70℃, maximum operating frequency is 40 cycles/minute, and the port thread is M5×0.8. The cylinder requires no lubrication. Gripping force varies with bore size; the 32mm bore model provides approximately 228N. These grippers are suitable for parallel gripping of workpieces in automated assembly, handling, sorting and other applications.

MHL2 Series Valve-Type Pneumatic Gripper (Parallel Opening and Closing)

MHL2 Series Valve-Type Pneumatic Gripper (Parallel Opening and Closing)

The MHL2 series is a valve-type pneumatic gripper with two parallel jaws and double-acting operation. Its two fingers open and close synchronously along parallel straight paths to grip, hold, position, and transfer small workpieces. Bore sizes include Φ10, Φ16, Φ20, and Φ40, with two fingers on all models. Each bore size has a corresponding finger stroke, allowing selection based on workpiece size and required opening. Gripping force increases with bore size. Select the bore based on workpiece weight, center of gravity, and required gripping force, and select the opening and closing stroke based on the workpiece shape. The compact body can be operated through direct pneumatic connections and supports side and end mounting. It can be integrated with robotic arms, indexing tables, and conveyor lines in applications such as automated assembly, electronic component assembly, and semiconductor and automotive parts handling.

MHL2 Series Valve-Type Pneumatic Gripper (Parallel Opening and Closing)

MHL2 Series Valve-Type Pneumatic Gripper (Parallel Opening and Closing)

The MHL2 series valve-type pneumatic gripper features a parallel-opening-and-closing design and is suitable for gripping and handling tasks on automated production lines. Its compact cylinder design is easy to install and offers high precision and reliability. The model code includes parameters such as the series, bore size, type, number, and switch, allowing configuration to meet specific needs. The bore size is 16 mm; type D indicates double acting; the number is 1; and the switch model is Y59A. It is widely used in the electronics, automotive, food, and other industries.

MHS2 Series Angular Pneumatic Gripper

MHS2 Series Angular Pneumatic Gripper

The MHS2 series is an angular pneumatic gripper with a pivoting jaw mechanism. The catalog specifies a 180° opening and closing angle, making it suitable for gripping, turning and transferring small workpieces. The catalog example model MHS2-16-D-2-M9NL comprises the series code, a bore of 16, type D, 2 auto switches and the M9NL auto switch model. It can be used in automated gripping applications requiring position detection. When selecting a model, confirm parameters including bore size, opening and closing angle, operating pressure, port size, and the number and model of auto switches.

MHS2 Series Parallel Opening and Closing Air Gripper (Cylindrical Body)

MHS2 Series Parallel Opening and Closing Air Gripper (Cylindrical Body)

The MHS2 series is a parallel opening and closing pneumatic gripper with a cylindrical body, suitable for external and internal gripping. It is available in seven bore sizes: 16, 20, 25, 32, 40, 50, and 63 mm. The operating medium is air; operating pressure is 0.2~0.6 MPa for 16~25 mm bores and 0.1~0.6 MPa for 32~63 mm bores. At 0.5 MPa, external gripping force is 21~502 N and internal gripping force is 23~537 N. Manual stroke is 4~16 mm; maximum operating frequency is 120 cycles/min for smaller bores or 60 cycles/min for larger bores. Port thread is M3×0.5 or M5×0.8. M9P(V), M9N(V), and M9B(V) magnetic switches are available, with lead lengths of 0.5 m (no symbol) or 3 m (L). Gripping point distance: L=20 mm for Φ16~Φ25 and L=30 mm for Φ32~Φ63.

MHS3 Series Parallel Grippers

MHS3 Series Parallel Grippers

The MHS3 series three-jaw parallel gripper uses a double-piston mechanism to open and close its three jaws simultaneously, providing self-centering gripping of cylindrical, square, and other workpieces. Standard bore sizes are 16, 20, 25, 32, 40, 50, 63, 80, and 100mm. The gripper has a cylindrical body with M3×0.5 threaded holes and φ4.5 through-holes with flat-bottom counterbores on the mounting surface, allowing front or side mounting. Magnetic switches, such as the M9N, can be fitted to detect the open and closed positions. Powered by compressed air, the gripper is suitable for handling workpieces in automated assembly, material handling, sorting, and other applications.

MHT2 Series Toggle-Type Pneumatic Grippers

MHT2 Series Toggle-Type Pneumatic Grippers

The MHT2 series consists of toggle-type (pivoting) pneumatic grippers driven by a double-acting cylinder. Their force-multiplying toggle linkage provides high gripping force for handling heavy workpieces. The self-locking toggle mechanism maintains the grip even if air pressure is suddenly lost or the air supply is cut off, preventing the workpiece from falling. A built-in magnetic ring allows magnetic switches to be mounted directly to detect the open and closed positions of the fingers. Four bore sizes are available: φ32/φ40/φ50/φ63. The operating pressure range is 0.1~0.6MPa, and the ambient and fluid temperature range is 5~60℃. Lubrication is not required; if lubrication is used, use turbine oil No. 1 ISO VG32. The finger opening angle is -3°~28°, holding force at 0.5MPa is 12.4~106 N·m, and weight is 0.80~2.08kg. The model number combines the base model, including bore size, with the number and model of magnetic switches.

MHT2 Series Pneumatic Grippers (Angular/Toggle Type)

MHT2 Series Pneumatic Grippers (Angular/Toggle Type)

The MHT2 series consists of angular pneumatic grippers that use a toggle mechanism to grip workpieces. They are suitable for picking, gripping, and transferring workpieces in automated equipment. The catalog lists two models, MHT2-50D and MHT2-63D, with the suffix D identifying the basic version of the series. These grippers are often used with accessories such as magnetic switches to detect gripping status. Refer to the full catalog for specific gripping force, stroke, operating pressure, and port size specifications.

MHZ2 Series Miniature Air Grippers

MHZ2 Series Miniature Air Grippers

The MHZ2 series consists of compact pneumatic grippers for gripping, positioning, and handling small workpieces. The series offers double-acting and single-acting configurations. The catalog lists models including MHZAJ2-6D, MHZAJ2-6S, and MHZAJ2-6C, with an effective gripping force of approximately 3.3 N per finger and an opening and closing stroke of approximately 6.1 mm. Reference values for external and internal gripping forces are also provided. The body dimension table covers sizes 10, 16, 20, 25, 32, and 40, showing mounting holes, magnetic switch mounting slots, and major overall dimensions to simplify selection and installation. On single-acting models, the port on one side must serve as a breather port. These grippers are suitable for precision gripping of light loads in electronics, semiconductor, medical, and automated assembly applications.

MHZ2 Series Air Grippers

MHZ2 Series Air Grippers

The MHZ2 series consists of parallel-opening air grippers (pneumatic fingers) with synchronized parallel movement for gripping, holding, positioning, and handling workpieces. Magnetic switches can be fitted for position detection. The series includes the standard MHZ2, compact MHZA2, compact MHZJ2 with dust cover, and long-stroke MHZL2, with bore sizes of Φ6, Φ10, Φ15, Φ20, and Φ25 mm. Actuation options are double-acting D, single-acting normally open S, and single-acting normally closed C. Finger options include basic, side threaded-hole mounting, through-hole mounting in the opening/closing direction, flat fingers, and axial piping (single-acting). Gripper body options include end block with side piping E, end block with Φ4 quick-connect fitting W, end block with axial M5 port M, and end block with axial port and Φ4 hose fitting H. A two-position cam-operated version with 180° opening and closing is also available in bore sizes of 10/16/20/25 mm, for gripping thin workpieces or workpieces requiring a large opening angle.

ZM3P Series Pneumatic Grippers

ZM3P Series Pneumatic Grippers

The ZM3P series consists of compact pneumatic grippers from SNS, featuring a shaft, rocker arms, needle bearings and a spring-return mechanism. The body is sealed with upper and lower covers and an O-ring. These grippers are suitable for gripping, positioning and holding small workpieces in automated equipment. The catalog lists two models, ZM3P06 and ZM3P06-W, both with a gripping force of 2.3N. The standard model offers opening and closing angles of 20°, 30° and 50°, while the W model offers angles of 25°, 50° and 75°. The series is compact and pneumatically actuated. Refer to the corresponding full catalog page for port size, operating pressure and working temperature.