Y-Type Mechanical Grippers

HDS/HRS Series Pneumatic Grippers (Y-Type Mechanical Grippers)
The HDS/HRS series pneumatic grippers (Y-type mechanical grippers) are available in two operating types: HDS driven type and HRS single-acting, normally open type. They are suitable for gripping, positioning and handling workpieces. Bore sizes are 10, 16, 20, 25 and 32 mm. Mounting fixture options: blank (no mounting fixture), HM (inner-ring mounting), HB (outer-ring mounting). Sensor options: blank (no sensor), 5G (CS-5G), 5GN (CS-5GN), with 1 or 2 sensors available. Order models are specified by combining the series code, bore size, mounting fixture, sensor type and quantity, for example HDS20-HM.

HFY Series Pneumatic Gripper (Y-Type)
The SNS HFY Series pneumatic gripper (Y-type) is powered by compressed air and features a Y-type jaw design for gripping, handling, and positioning workpieces in automated equipment. It is available in five bore sizes: 6, 10, 16, 25, and 32 mm, with three mounting options: rear mounting, front threaded-hole mounting, and side mounting. The corresponding fastening bolts are M3×0.5, M4×0.7, M5×0.8, M6×1.0, and M6×1.0, respectively. Maximum tightening torque ranges from 0.89~2.5 N·m, and maximum bolt insertion depth ranges from 5~15 mm. A drop-prevention device must be installed during use, and excessive external force and impact must be avoided. The workpiece must be positioned on the centerline between the two jaws and inserted coaxially. Use a speed control valve to adjust the jaw opening and closing speeds. When installing jaw attachments, hold the jaw with an open-end wrench before tightening the screws with a hex key.

HFY Series Y-Type Pneumatic Grippers
The HFY series consists of Y-type (angular opening and closing) pneumatic grippers, a type of pneumatic actuator used to pick, grip, position, and transfer small workpieces on automated production lines. The series is available in two configurations: standard double-acting and single-acting, normally open. Double-acting models open and close the fingers by alternately supplying air to the two ports, while single-acting, normally open models use a return spring to remain open when air pressure is lost, making them suitable for applications with safety requirements. Six bore sizes are available: 6, 10, 16, 20, 25, and 32 mm. Larger bores provide greater gripping force and opening stroke, allowing selection based on workpiece size and required gripping force. Models use a simple “HFY-bore” designation, such as HFY-10. Optional finger and gripper body configurations, such as side threaded-hole mounting, through-hole mounting in the opening and closing direction, and flat fingers, can be selected as needed with reference to options for grippers in the same series. Compact and lightweight, the grippers offer flexible mounting options and can be paired with magnetic switches to detect fully open and closed positions. They are widely used in automated equipment for consumer electronics assembly, packaging, lithium battery production, and automotive components.