Dual-Rod Cylinder

HLF Series Slide Table Cylinder

HLF Series Slide Table Cylinder

1. Integrated side-mounted design combining a crossed-roller linear guide and cylinder effectively reduces cylinder thickness; 2. Excellent straightness and rotational accuracy make it ideal for precision clamping applications; 3. The cylinder can be mounted and secured from 2 directions; 4. Piping can be connected from 2 directions.

CG1 Series Lightweight Cylinder

CG1 Series Lightweight Cylinder

CJP Series Pin Cylinder (Single-Acting)

CJP Series Pin Cylinder (Single-Acting)

TN Series Dual-Rod and Three-Rod Cylinders

TN Series Dual-Rod and Three-Rod Cylinders

TN Series dual-rod and three-rod cylinders feature a double-acting design and use compressed air filtered through a 40 μm or larger filter. The operating pressure range is 0.2–1.0 MPa (29–145 psi). The stated operating temperature range is 0.15–1.0 MPa (22–145 psi), but the source text contains repetition and errors, and the actual operating temperature is not specified. The series is available in several bore sizes: 10 mm, 16 mm, 20 mm, 25 mm, and 32 mm. It is suitable for automation applications requiring dual-rod or three-rod output.

TR Series Twin-Rod and Triple-Rod Cylinders

TR Series Twin-Rod and Triple-Rod Cylinders

TR Series twin-rod and triple-rod cylinders use compressed air as the working medium and operate at pressures from 0.2 to 1.0 MPa (29 to 145 psi). Bore sizes include 6 mm, 10 mm, 16 mm, 20 mm, 25 mm, and 32 mm. They are suitable for clamping, pushing, and other operations in automation equipment. The twin-rod design offers greater resistance to twisting, while the triple-rod design is suited to applications involving larger lateral forces. These compact cylinders offer versatile mounting options and are widely used in industrial automation.

TCL/TCM Series Dual-Rod/Triple-Rod Cylinders

TCL/TCM Series Dual-Rod/Triple-Rod Cylinders

TCL/TCM Series Dual-Rod/Triple-Rod Cylinders feature a double-acting design and use air (40 μm or finer filtration) as the operating medium. The operating pressure range is 0.2–0.7 MPa (29–100 psi). The TCL series is available with bore sizes of 6, 10, 12, 16, 20, 25, 32, 40, 50, 63, 80, and 100 mm; the TCM series is available with bore sizes of 8, 12, 16, and 20 mm. These products are suited to gripping, pushing, and other applications in automation equipment, and offer a compact design and high reliability.

TCL/TCM Series Twin-Rod Cylinders

TCL/TCM Series Twin-Rod Cylinders

This series of twin-rod cylinders includes the TCL and TCM subseries. Bore sizes range from 6 to 100 mm. The cylinders are double-acting and use filtered air (40 μm or finer), with an operating pressure range of 0.2–0.7 MPa (29–100 psi). They are suitable for clamping, pushing, pulling, and other applications in automation equipment.

TDA Series Twin-Rod Cylinder

TDA Series Twin-Rod Cylinder

The TDA series is a twin-rod cylinder with two parallel piston rods, offering rotation resistance, precise guidance, and strong load capacity. It is suitable for automated equipment requiring anti-rotation and precise guidance. This standard series can be used with a wide range of automated equipment. Refer to the catalog for detailed specifications, including bore sizes, strokes, and mounting options.

CXS Series Twin-Rod Cylinder

CXS Series Twin-Rod Cylinder

The CXS series is a twin-rod guided pneumatic cylinder. Two parallel piston rods drive a shared end plate, enabling it to withstand moderate radial and eccentric loads while effectively preventing rod rotation. It is suitable for applications requiring anti-rotation, higher positioning accuracy, or simultaneous pushing and clamping of workpieces. The series is widely used in automation equipment, fixtures, conveyor lines, and assembly lines. Selection is based primarily on bore size, stroke, mounting configuration (such as basic or magnetic switch-equipped), and whether an internal magnetic ring is provided for magnetic switch installation. This catalog page lists only the series and product names; specific bore and stroke sizes must be confirmed using the complete model code. The cylinder typically uses clean, dry compressed air as its working medium. During installation, ensure both rods are loaded evenly to prevent uneven loading on one side from causing abnormal seal wear.

CXSW Series Twin-Rod Cylinder

CXSW Series Twin-Rod Cylinder

The CXSW series is a twin-rod cylinder with two parallel piston rods that operate simultaneously. It offers strong resistance to torsion and off-center loads, as well as high guiding accuracy. It is suitable for clamping, lifting, transfer and other applications where workpiece rotation must be prevented or lateral loads must be supported. Bore sizes are 32, 40, 50, 63, 80 and 100 mm, with standard strokes from 10 mm to 100 mm (10/20/30/40/50/75/100). An integrated magnetic ring is optional (S indicates a magnet; a blank position indicates no magnet), allowing position detection with a magnetic switch. Mounting options include basic, rear single clevis CA, rear double clevis CB, front flange FA, rear flange FB, foot mount LB, trunnion mount TC, and trunnion mount with foot bracket TC-M. The ordering code combines the series code, bore, stroke, magnet code and mounting type in sequence, for example CXSW-M-20x50-□-Y59A.

SDAW/SDAWS Series Twin-Rod Short-Stroke Cylinders

SDAW/SDAWS Series Twin-Rod Short-Stroke Cylinders

The SDAW/SDAWS series comprises short-stroke cylinders: SDAW twin-rod and SDAWS single-rod models. They use compressed air and are available in double-acting or single-acting (spring-return/spring-extend) configurations. Bore sizes are 12, 16, 20, 25, 32, 40, 50, 63, 80 and 100mm. Maximum operating pressure is 1.5MPa (15.3kgf/cm²), operating temperature is 5~60℃, piston speed is 50~500mm/s, and stroke tolerance is approximately ±10mm. No additional lubrication is required. The rod end has a female thread as standard, with a male thread available as an option. Through-hole mounting is standard, with female threads at both ends available as an option. Port sizes are M5×0.6, 1/8, 1/4 and 3/8. Models are available with a magnet (S) and with male threads (B) or no threads (N). They are suitable for precision clamping, positioning and pushing applications requiring a compact profile and twin guide rods to prevent rotation.

CXSJM Series Twin-Rod Cylinder

CXSJM Series Twin-Rod Cylinder

The CXSJM series twin-rod cylinder is a pneumatic actuator with two parallel piston rods that move in sync. It offers resistance to twisting, precise guidance, and high load capacity, making it suitable for clamping, lifting, anti-rotation, and precision positioning applications. Cylinders can be selected by bore size and stroke. Common bore sizes include 20mm, with strokes ranging from short to medium and long. Flexible mounting options are available, and magnetic switches can be fitted for position detection.

CXS Series Twin-Rod Cylinder

CXS Series Twin-Rod Cylinder

The CXS Series Twin-Rod Cylinder is a double-rod actuator featuring a dual-piston-rod design and anti-rotation function, making it suitable for applications requiring high-precision positioning. Bore sizes range from 10 to 32 mm, with strokes from 6 to 100 mm. A magnetic switch (Y59A) and PT-threaded ports are available as options. The bearing type is M. It is widely used in automation equipment, pneumatic clamps, and similar applications.

TN Series Dual-Rod Cylinder

TN Series Dual-Rod Cylinder

The TN Series dual-rod cylinder features two guide rods and is ideal for applications requiring high resistance to twisting and smooth linear motion. Its dual-piston-rod design effectively withstands lateral loads, making it suitable for clamping, pushing, and positioning operations in automation equipment. Bore sizes are available in 10, 16, 20, 25, and 32 mm; the example stroke is 50 mm (other strokes can be customized). The cylinder can be fitted with a magnetic switch (S indicates a magnetic switch; blank indicates none). PT threads are standard for the port connections (blank indicates the standard thread). With a compact design and easy installation, this series is widely used on industrial automation production lines.

CXSW Series Twin-Rod Cylinder

CXSW Series Twin-Rod Cylinder

The CXSW series twin-rod cylinder features a dual-piston-rod design for high guiding accuracy and resistance to moment loads. It is suitable for bidirectional linear motion in confined spaces. Bore sizes range from 6 to 32 mm, and stroke lengths from 10 to 50 mm. Bearing types, long-stroke designations, and magnetic switch models are available as options. It is widely used in automation equipment, pneumatic systems, and other applications requiring smooth, stable movement.