Air Tubing · Hoses
PY Series Y-Type Tee
PC-C Series Straight Connector with Parallel Thread
PZB Series Threaded Cross

PUL Series Telescopic Tube
PLF Series L-Shaped Female Thread Tee
PH Series Male Hex Connector

FEP Series Transparent Perfluoro(ethylene propylene) (FEP, F46) Tubing
Features listed on the page: Resistant to high and low temperatures (-70°C to +260°C); non-stick, with no residue adhering to the inner wall; reliable electrical performance and high insulation; corrosion-resistant; low water absorption; nonflammable; nontoxic; highly transparent; weather-resistant; easy to process further.
PYB Series Y-Type Threaded Tee
PE Series T-shaped Tee
PMF Series Female-Thread Bulkhead Straight Connector
PHF Series Tandem Shaft Coupling
PEB Series T-Type Right-Hand Threaded Tee
PLL Series Extended-Thread Tee
PKD Series Five-Way Reducing Threaded Fitting
PED Series T-Type Side-Threaded Tee
PCF Series Female Thread Straight Fitting
PHW Series L-Shaped Threaded Swivel Tee

XDH Series Plastic Air Blow Gun
The air gun barrel is fitted with an ultra-wear-resistant polyurethane sleeve to prevent the metal from denting or scratching the workpiece during use. Do not point the air gun at the eyes. Do not leave it in direct sunlight or a damp environment. Do not subject it to external forces such as impacts; handle it with care.

TUSC Series TPU Tubing
TUSC Series TPU tubing is made from new, imported polyester TPU. It features smooth, uniform walls, dimensional stability, and a long service life. Key benefits include excellent elasticity, a small bend radius, easy installation and cutting, and abrasion resistance. The working pressure is 1.0 MPa and the burst pressure is 3.5 MPa. Standard hardness grades are 95A and 98A, with custom grades available from 70A to 62D. Suitable media include non-corrosive compressed gases and lubricating oils. The tubing is highly transparent, and colored versions use imported, weather-resistant color masterbatch to keep their vivid color from fading. Common sizes include 4 × 2.5 mm, 6 × 4 mm, and 8 × 5 mm.

POLY Series Polyether PU Tubing
POLY Series Polyether PU Tubing is made from brand-new imported polyether raw materials. It features smooth, uniform walls, dimensional stability, and a long service life. Its key benefits include excellent resilience, a small bend radius, easy installation and cutting, and abrasion resistance. The transparent tubing offers high clarity, making the condition of the medium easy to see; colored tubing is made with imported weather-resistant color masterbatch for bright, long-lasting color. Working pressure at room temperature: 1.0 MPa; burst pressure: 3.0 MPa. Operating temperature range: -40°C to +80°C; recommended range for continuous use: -30°C to +60°C. Hardness can be customized from 85A to 95A. The tubing offers excellent flexibility and elasticity and is resistant to hydrolysis. Suitable media: non-corrosive compressed gases, water, and non-corrosive fluids. Common sizes include various ID/OD combinations, such as 1.5 × 2.8 mm and 2.8 × 4.3 mm. Length depends on the size; working pressure: 0–0.8 MPa.

DFRPUM Series Flame-Retardant TPU Tubing
DFRPUM series flame-retardant TPU tubing features a 1 mm-thick flame-retardant plastic outer layer and an inner layer made of imported TPU. The tubing has a smooth, uniform wall, stable dimensions, and a long service life. It offers excellent resilience, a small bend radius, and is easy to install and cut. Its color comes from imported weather-resistant masterbatch and resists fading over time. The normal operating temperature range is -20°C to +80°C; for continuous use, -10°C to +60°C is recommended. It protects against sparks and spatter and meets the UL 94 V-0 flame-retardancy rating; V-1 and V-2 grades are available to order. Suitable media include non-corrosive compressed gases and lubricating oils; custom versions are available for non-corrosive fluids. It is suitable for spark- and spatter-prone environments and welding fixtures. Common sizes are 6 × 4, 8 × 5, 10 × 6.5, and 12 × 8 mm, with a bend radius of 100 mm.

PTFE Series Polytetrafluoroethylene Tubing
PTFE series polytetrafluoroethylene tubing is made from PTFE and offers excellent resistance to high and low temperatures (-70°C to +260°C), non-stick properties, high electrical insulation, corrosion resistance, low water absorption, flame resistance, and weather resistance. Common sizes range from 2 mm to 19 mm ID and 4 mm to 22 mm OD, with burst pressures of 23–127 kg/cm² and working pressures of 8–42 kg/cm². It is suitable for fluid transfer and insulation protection in the chemical, electronics, medical, food, and other industries.

PTFE Series Plastic Tubing
PTFE series plastic tubing is made from polytetrafluoroethylene (PTFE) and offers excellent resistance to high and low temperatures (-70°C to +260°C), non-stick properties, high electrical insulation, corrosion resistance, low water absorption, flame resistance, non-toxicity, high transparency, and weather resistance. It is also easy to process. Available sizes range from 2 mm to 16 mm inner diameter and 4 mm to 18 mm outer diameter, with a working pressure of 8–42 kg/cm² and a burst pressure of 23–127 kg/cm². It is suitable for fluid transfer in industries such as chemicals, electronics, and food processing.

PEU Series Plastic Tubing
PEU series plastic tubing is made from high-quality plastic and offers excellent flexibility, vibration and impact resistance, and low-temperature performance. It is suitable for oil and gas media at temperatures from -40°C to 60°C. Lightweight, with a density just one-eighth that of copper tubing, it is easy to transport and install. Available in metric and imperial sizes, with inner diameters from 2 mm to 0.5 in and outer diameters from 4 mm to 5/8 in. Working pressure ranges from 7 to 100 kg/cm², burst pressure from 21 to 400 kg/cm², and lengths from 100 to 600 m. Available colors include black, blue, red, yellow, and clear.

PU Series Polyurethane Tubing
PU series tubing is made of polyester-based polyurethane with a hardness of 95A-98A. It is suitable for conveying air and other pneumatic fluids, with an ambient and fluid temperature range of -20℃~+80℃. Its resistance to pressure, weather, corrosion and repeated bending makes it an ideal flexible hose for pneumatic connections. Metric sizes range from 4~16mm in outer diameter (2.5~12mm inner diameter), while inch sizes range from 5/32~1/2″. Standard roll lengths are 100m or 200m. Burst pressure at 20℃ is 24~30Bar, and the minimum bend radius is 10~55mm, increasing with tube diameter to accommodate the pressure and routing requirements of different pneumatic circuits.

PUC Series Polyurethane Tubing
PUC series polyurethane tubing is made from polyester-based polyurethane (PU) with a hardness of 95A-98A. It is suitable for air, with an ambient and fluid temperature range of -20℃~+80℃. In addition to retaining all the properties of standard PU tubing, it is lightweight, flexible, durable, easy to extend and retract, and simple to use. It is widely used to convey compressed air in pneumatic systems and can be used with push-in fittings for quick connections. When ordering, specify series PUC, outer diameter, inner diameter, length (1M), color, and whether push-in fittings are required. Color options are blue BU, transparent C, orange O, black B, green G, yellow Y, and red R. For push-in fittings, select Blank for no fittings.

PA6/PA12/PA11 Series Nylon Tubing
The PA6/PA12/PA11 series of nylon tubing is pneumatic tubing extruded from polyamide (nylon), commonly used to convey air and other fluids. Nylon offers high strength, good pressure resistance, abrasion resistance and resistance to common chemical corrosion. It is also flexible with a small bend radius, making it suitable for compact routing inside equipment. Compared with PU tubing, it is slightly more rigid but has a higher pressure capacity. Sizes are specified as outer diameter × inner diameter (mm). The series is available in seven common sizes: 4×2.5, 6×4, 8×6, 10×8, 10×7.5, 12×10 and 12×9. The 10×7.5 and 12×9 sizes are thin-walled versions, providing a larger flow area for the same outer diameter. Standard supply is 100M or 200M per roll, and the tubing can be cut to length as needed. For on-site installation, use a TC-01 tube cutter for clean, even cuts and connect the tubing to push-in fittings and pneumatic components.

PU/PE Series Pneumatic Tubing
PU/PE series pneumatic tubing carries compressed air in pneumatic systems. PU (polyurethane) tubing offers good flexibility, resistance to repeated bending fatigue, rapid recovery, and good oil resistance. It is suitable for dynamic applications such as fixtures, robotic arms, and high-frequency reciprocating motion. PE (polyethylene) tubing is lightweight, economical, and offers good chemical resistance, making it suitable for fixed air lines. Tubing sizes are specified by outside diameter × inside diameter, with common sizes including 4×2.5, 6×4, 8×5, 10×6.5, and 12×8 mm. Colors include red, black, blue, and transparent for easy identification of air lines. Key specifications include outside diameter, inside diameter, material, color, working pressure, and operating temperature range. Select the outside diameter based on the required flow rate and available installation space, then choose PU or PE according to the working pressure, ambient temperature, and media compatibility. The tubing is typically used with pneumatic accessories such as push-in fittings and tubing cutters.

FD Series Antifreeze Tubing
FD series antifreeze tubing is made of polyurethane (PU) and is suitable for fluids such as air and water, with an ambient and fluid temperature range of -40℃~+60℃. It offers excellent flexibility, a small bending radius, vibration resistance, light weight, wide operating temperature and pressure ranges, good chemical resistance, low pressure loss, consistent hardness, and a long service life. It is non-toxic and odorless, can be customized in a choice of colors, and complies with ROHS environmental requirements. Common applications include pneumatic tool assemblies on industrial robots, pressurized lines for pneumatic tools, conveying water and other fluids, vacuum tubing, protective sleeves for metal and electronic products, and decorative items. The order code consists of FD, the outer diameter code, inner diameter code, length code, and color code. Available colors are blue, black, transparent, and red.

Anti-static pneumatic tubing
This anti-static pneumatic tubing is made from imported German Bayer PU polyurethane with an anti-static additive. It has a hardness of 95A, an operating temperature range of -25℃ to +80℃, and a surface resistance of approximately 10⁸–10⁹ Ω, providing continuous anti-static protection. Static electricity generated by friction during equipment operation and use can be dissipated as air flows through the tubing, helping protect equipment and products while preventing static from attracting dust or damaging electronic components. The tubing is flexible, lightweight, vibration-resistant and has a small bend radius. It offers good chemical resistance, low pressure loss, consistent hardness and a long service life. Colors can be customized for easy line identification. It is suitable for conveying compressed air and coating solvents in the automotive, electronics and chemical industries. It can also be used for industrial robot pneumatic tool lines, pressurized transfer lines, vacuum tubing and protective sheathing for metal and electronic products.

PUB Series Braided Reinforced Hose with Fittings
The PUB series braided reinforced hose with fittings is designed for pneumatic and fluid transfer applications. Fitted at both ends, it can convey air, water and other fluids. The braided reinforcement improves pressure resistance and burst strength, while the fittings allow quick connection to piping. Available in metric sizes, it covers inner diameters of 5.0~13.0mm and outer diameters of 8.0~18.0mm. The standard supply length is 100 meters (model suffix -100M). Select the appropriate product number based on the inner diameter, outer diameter and fluid medium. The hose is widely used in factory automation pneumatic circuits and general fluid lines.

JSFB Series Fiber-Reinforced Explosion-Proof Oil Hose
The JSFB series fiber-reinforced explosion-proof oil hose, also known as a fiber-reinforced antistatic air hose, is a multilayer hose with high-strength fiber yarn braided between the inner and outer rubber layers. This reinforcement provides pressure and burst resistance, allowing the hose to carry air, water and other fluids. Models use the code “JSFB + two-digit outer diameter + two-digit inner diameter ×10 - roll length.” For example, JSFB1065-100M indicates an outer diameter of 10.0 mm, an inner diameter of 6.5 mm and a standard roll length of 100 m. Commonly stocked sizes cover outer diameters of 8.0/10.0/12.0 mm and inner diameters of 5.0/6.5/8.0 mm, supplied in complete 100 m rolls. The hose combines oil resistance, pressure resistance and explosion-proof safety features, making it suitable for pneumatic tools, painting, chemical processing and industrial piping where explosion-proof or antistatic properties are required. Versions with fittings (PUB series) and antistatic models are also available in the same range.

DJT Series Braided Reinforced Tubing
DJT series braided reinforced tubing is a flexible protective sleeve with a reinforced braided outer layer, designed primarily to protect pneumatic lines, hydraulic lines and cables. It is abrasion-resistant, compression-resistant, explosion-proof and antistatic. Its flexibility and small bend radius make it suitable for routing in confined spaces in factory automation equipment. Models are designated DJT-size×inner diameter and are available in a range of specifications, with inner diameters from 4mm to 8mm and various lengths to suit equipment travel and installation space. This standard industrial accessory protects air, water and other fluid lines.

SJPS Double-Braided PU Hose
The SJPS double-braided PU hose is designed for spraying and solvent applications. It features a polyurethane (PU) inner tube reinforced with a double braid of polyester yarn, combining PU flexibility with the braid's resistance to pressure, abrasion and bursting. It is primarily used with spraying equipment, solvent transfer lines and pneumatic systems subject to high pulsating pressures. The reinforcement helps limit hose expansion and extend service life. The catalog ordering code for this series has five parts: model (SJPS), braid type (B), outer diameter, inner diameter and length (m). For example, SJPS-B-08-50-100m specifies an 8mm outer diameter, a 5.0mm inner diameter and 100 meters per roll. Common outer diameters are 8, 12 and 16mm, with rolls typically available in 50m and 100m lengths. Select the inner and outer diameters to suit the working pressure, burst pressure, medium (solvent/paint/compressed air) and hose fitting size. Working and burst pressures decrease as the outer diameter increases; refer to the applicable polyurethane tubing and polyester air hose specification tables for exact values.

PE Series High-Pressure Burst-Resistant Spray (Solvent) Hose
The PE series high-pressure burst-resistant spray (solvent) hose is a dedicated fluid transfer hose for TWSNS pneumatic systems. It features a PE (polyethylene) outer coating and a 2C inner coating, and is available in two main configurations: high-pressure burst-resistant spray (solvent) hose and twin-line braided PU hose. It is suitable for conveying solvents, paint and compressed air in spray equipment. Products are selected using the ordering code format “model + oil hose/braided hose + outer diameter + inner diameter + length.” A common specification is outer diameter 08 (8mm) and inner diameter 5.0 (5mm), supplied in standard 100m rolls. The hose is flexible, pressure-resistant and resistant to solvent corrosion. The braided layer improves burst pressure resistance and dimensional stability, making it suitable for long hose runs on automated spray lines. The catalog lists both working and burst pressures to help verify system pressure margins during selection. Colors and packaging can be specified as needed.

PE Series Polyethylene Oil Tubing
The PE series polyethylene oil tubing from SNS Automation (Ningye) Group is designed for high-pressure, burst-resistant spraying and solvent applications. Its two-layer composite construction combines a PE (polyethylene) outer coating with a 2C inner coating to withstand spraying solvents and high-pressure conditions. It is suitable for pneumatic piping systems used in spray painting, coating and solvent transfer. Products are selected using the order code format “model-oil tubing-outer diameter-inner diameter-length”. The standard outer diameter is 08, paired with an inner diameter of 5.0, and the standard roll length is 100m, with other lengths such as 50m also available. Confirm both the working pressure and burst pressure ratings when selecting tubing to ensure an adequate safety margin in high-pressure spraying environments. The tubing is flexible and chemically resistant, with a smooth inner surface that minimizes flow resistance. It is supplied in full rolls and can be cut to length, making it suitable for automated spraying lines, coating equipment and solvent transfer circuits.

FJLD Series Antistatic Oil Hose
The FJLD series antistatic oil hose (antistatic Teflon hose) has a two-layer composite construction, with a polytetrafluoroethylene (Teflon/PTFE) inner layer and a polyethylene outer layer. The Teflon inner layer resists corrosion, acids, alkalis, high temperatures and static electricity. It also provides strong electrical insulation, has a smooth inner surface and does not adhere to chemical solvents. The hose is suitable for spraying, dispensing, chemical solvent transfer and automated pneumatic or fluid lines where static sensitivity is a concern. The model number consists of the series code FJLD, construction code (such as 2C), outer diameter, inner diameter and fixed length (such as a 100m roll). Select fittings to match the outer and inner diameters, and cut the hose to the required length or order a full roll. Working pressure varies with size and temperature. Use at room temperature; refer to the product label or manufacturer for confirmed values.

FJLD Series Antistatic Spray Hose
The FJLD series is an antistatic spray hose with a polytetrafluoroethylene (PTFE, commonly known as Teflon) inner layer and a polyethylene outer layer. It offers resistance to corrosion, acids, alkalis and high temperatures, as well as antistatic properties and excellent electrical insulation. Its smooth inner wall resists chemical solvent adhesion, making it suitable for conveying and spraying coatings, solvents and various chemical solutions. Sizes are specified by outer and inner diameter pairs (the catalog example is outer diameter 08 and inner diameter 5.0). The standard supply length is 100m per roll. Models can be selected using a combined outer diameter, inner diameter and length code.

Nylon Tubing
This nylon tubing series is made from a polyamide 12 and polyurethane composite. The inner and outer walls are specially treated for a smooth, powder-repellent surface that resists wear and aging. The tubing can be used continuously at -40~+80℃, with an approximate working pressure of 12kgf/cm² and burst pressure of 35kg at room temperature. The catalog lists 10 sizes with outer diameters of 4~12mm and wall thicknesses of 0.75~1.5mm. Working pressures range from 18~36kgf/cm² and burst pressures from 40~120kgf/cm²; larger diameters have lower pressure ratings, while smaller diameters have higher ratings. The tubing is naturally white and packaged in transparent plastic film. The 12/10mm outer diameter sizes are supplied in 100-meter rolls, while the 8/6/5/4mm sizes are available in 100-meter or 120-meter rolls. Applications include powder transport for electrostatic coating, conveyance of mildly acidic chemicals, and industrial water transport. Non-standard sizes are available on request.

Electrostatic Powder Coating Hose (Nylon Tubing)
Hose and nylon tubing for electrostatic powder coating, used to convey coating powder, weakly acidic chemical liquids, and industrial water. The hose is made from imported high-elasticity polyolefin rubber and is flexible, lightweight, cold-resistant, and resistant to aging. Its inner and outer surfaces are abrasive-treated for wear resistance and to prevent powder buildup. Two black conductive plastic tubes embedded in the hose wall dissipate static electricity generated during powder transport, ensuring normal equipment operation. The nylon tubing is made from polyamide 12 and polyurethane and operates at -40~+80℃. Common sizes have an outer diameter of 4~12mm and a wall thickness of 0.75~1.5mm. Working pressure is 18~36 and burst pressure is 40~120 (values as given in the original). Standard package lengths are 100m or 100/120m. The tubing is natural white and packaged in transparent plastic film. Non-standard sizes can be custom-made.

Flame-Retardant Pneumatic Tubing (Spark-Resistant Tubing)
Flame-retardant pneumatic tubing (spark-resistant tubing) has a two-layer construction with a highly elastic TPU inner layer and a thermoplastic rubber outer layer. It combines flexibility, pressure resistance, flex resistance and flame retardancy, making it suitable for spark-generating applications or those requiring spark protection, including electrical discharge machines, cutting machines, laser cutting, robotic welding and gas transfer. The inner layer protects the air line, while the outer layer resists aging and enhances flame retardancy. Hardness is approximately 95A, operating temperature is -25~+80℃, thermoplastic rubber service temperature is 0~120℃, working pressure is 8KG, flame-retardant rating is Class 1, and environmental rating is V0. Confirm specifications such as outer diameter, inner diameter and length when selecting a product. Non-standard sizes can be customized on request.

PU Series
PU Series polyurethane tubing (PU Tube) is made from polyurethane and offers excellent flexibility, abrasion resistance, oil resistance, and weather resistance. It is suitable for pneumatic systems, industrial automation piping connections, and other applications. The product code follows the format “PU outer diameter inner diameter color.” Outer diameter codes range from 03 (3 mm) to 1125 (1125 mm), while inner diameter codes range from 20 (0.2 mm) to 1055 (6.5 mm). Available colors are black (BK), blue (BU), clear (TR), orange (OR), and white (WH). This tubing is widely used in pneumatic air-supply lines, sensor lines, and other applications, and features high elasticity and resistance to aging.

PA12 Series Plastic Tubing
This series of plastic tubing is made from PA12 and manufactured using virgin imported PA12 material. The tubing has a smooth, uniform wall, stable dimensions, and a long service life. It offers excellent abrasion and weather resistance, elasticity, and low-temperature performance. Its low water absorption makes it resistant to hydrolysis. At room temperature (23°C), the working pressure is 2.0 MPa and the burst pressure is 5.5 MPa. The normal operating temperature range is -40°C to +120°C, with a recommended long-term temperature range of -30°C to +85°C. It is resistant to chemicals and suitable for media with a pH of 4–9. Applications include non-corrosive compressed gases, water, fuel oil, chemical solvents, and other fluids. Common sizes range from 4 mm to 12 mm in outer diameter and 2.5 mm to 10 mm in inner diameter, with a variety of options to suit different applications.

PA6M Series Nylon Tubing
PA6M series nylon tubing is made from brand-new imported PA6 material. It features a smooth, uniform inner wall, stable dimensions, and a long service life. The tubing offers high pressure resistance, rigidity, resistance to aging and wear, and excellent mechanical properties. At room temperature (23°C), the working pressure is 2.0 MPa and the burst pressure is 6.0 MPa. The normal operating temperature range is -30°C to +120°C; for continuous use, the recommended range is -20°C to +85°C. It is resistant to chemicals and suitable for media with a pH of 4–9. Applications include non-corrosive compressed gases, water, fuel oil, chemical solvents, and other fluids. The model code consists of “PA6M” followed by the outer and inner diameters (for example, PA6M0425 denotes an outer diameter of 4 mm and an inner diameter of 2.5 mm). Outer diameters range from 4 to 12 mm, and inner diameters from 2.5 to 10 mm.