Nylon Tubing

XDH Series Plastic Air Blow Gun
The air gun barrel is fitted with an ultra-wear-resistant polyurethane sleeve to prevent the metal from denting or scratching the workpiece during use. Do not point the air gun at the eyes. Do not leave it in direct sunlight or a damp environment. Do not subject it to external forces such as impacts; handle it with care.

PA6/PA12/PA11 Series Nylon Tubing
The PA6/PA12/PA11 series of nylon tubing is pneumatic tubing extruded from polyamide (nylon), commonly used to convey air and other fluids. Nylon offers high strength, good pressure resistance, abrasion resistance and resistance to common chemical corrosion. It is also flexible with a small bend radius, making it suitable for compact routing inside equipment. Compared with PU tubing, it is slightly more rigid but has a higher pressure capacity. Sizes are specified as outer diameter × inner diameter (mm). The series is available in seven common sizes: 4×2.5, 6×4, 8×6, 10×8, 10×7.5, 12×10 and 12×9. The 10×7.5 and 12×9 sizes are thin-walled versions, providing a larger flow area for the same outer diameter. Standard supply is 100M or 200M per roll, and the tubing can be cut to length as needed. For on-site installation, use a TC-01 tube cutter for clean, even cuts and connect the tubing to push-in fittings and pneumatic components.

Nylon Tubing
This nylon tubing series is made from a polyamide 12 and polyurethane composite. The inner and outer walls are specially treated for a smooth, powder-repellent surface that resists wear and aging. The tubing can be used continuously at -40~+80℃, with an approximate working pressure of 12kgf/cm² and burst pressure of 35kg at room temperature. The catalog lists 10 sizes with outer diameters of 4~12mm and wall thicknesses of 0.75~1.5mm. Working pressures range from 18~36kgf/cm² and burst pressures from 40~120kgf/cm²; larger diameters have lower pressure ratings, while smaller diameters have higher ratings. The tubing is naturally white and packaged in transparent plastic film. The 12/10mm outer diameter sizes are supplied in 100-meter rolls, while the 8/6/5/4mm sizes are available in 100-meter or 120-meter rolls. Applications include powder transport for electrostatic coating, conveyance of mildly acidic chemicals, and industrial water transport. Non-standard sizes are available on request.

Electrostatic Powder Coating Hose (Nylon Tubing)
Hose and nylon tubing for electrostatic powder coating, used to convey coating powder, weakly acidic chemical liquids, and industrial water. The hose is made from imported high-elasticity polyolefin rubber and is flexible, lightweight, cold-resistant, and resistant to aging. Its inner and outer surfaces are abrasive-treated for wear resistance and to prevent powder buildup. Two black conductive plastic tubes embedded in the hose wall dissipate static electricity generated during powder transport, ensuring normal equipment operation. The nylon tubing is made from polyamide 12 and polyurethane and operates at -40~+80℃. Common sizes have an outer diameter of 4~12mm and a wall thickness of 0.75~1.5mm. Working pressure is 18~36 and burst pressure is 40~120 (values as given in the original). Standard package lengths are 100m or 100/120m. The tubing is natural white and packaged in transparent plastic film. Non-standard sizes can be custom-made.