Yarn-Reinforced Hose

PUB Series Braided Reinforced Hose with Fittings

PUB Series Braided Reinforced Hose with Fittings

The PUB series braided reinforced hose with fittings is designed for pneumatic and fluid transfer applications. Fitted at both ends, it can convey air, water and other fluids. The braided reinforcement improves pressure resistance and burst strength, while the fittings allow quick connection to piping. Available in metric sizes, it covers inner diameters of 5.0~13.0mm and outer diameters of 8.0~18.0mm. The standard supply length is 100 meters (model suffix -100M). Select the appropriate product number based on the inner diameter, outer diameter and fluid medium. The hose is widely used in factory automation pneumatic circuits and general fluid lines.

JSFB Series Fiber-Reinforced Explosion-Proof Oil Hose

JSFB Series Fiber-Reinforced Explosion-Proof Oil Hose

The JSFB series fiber-reinforced explosion-proof oil hose, also known as a fiber-reinforced antistatic air hose, is a multilayer hose with high-strength fiber yarn braided between the inner and outer rubber layers. This reinforcement provides pressure and burst resistance, allowing the hose to carry air, water and other fluids. Models use the code “JSFB + two-digit outer diameter + two-digit inner diameter ×10 - roll length.” For example, JSFB1065-100M indicates an outer diameter of 10.0 mm, an inner diameter of 6.5 mm and a standard roll length of 100 m. Commonly stocked sizes cover outer diameters of 8.0/10.0/12.0 mm and inner diameters of 5.0/6.5/8.0 mm, supplied in complete 100 m rolls. The hose combines oil resistance, pressure resistance and explosion-proof safety features, making it suitable for pneumatic tools, painting, chemical processing and industrial piping where explosion-proof or antistatic properties are required. Versions with fittings (PUB series) and antistatic models are also available in the same range.

DJT Series Braided Reinforced Tubing

DJT Series Braided Reinforced Tubing

DJT series braided reinforced tubing is a flexible protective sleeve with a reinforced braided outer layer, designed primarily to protect pneumatic lines, hydraulic lines and cables. It is abrasion-resistant, compression-resistant, explosion-proof and antistatic. Its flexibility and small bend radius make it suitable for routing in confined spaces in factory automation equipment. Models are designated DJT-size×inner diameter and are available in a range of specifications, with inner diameters from 4mm to 8mm and various lengths to suit equipment travel and installation space. This standard industrial accessory protects air, water and other fluid lines.

SJPS Double-Braided PU Hose

SJPS Double-Braided PU Hose

The SJPS double-braided PU hose is designed for spraying and solvent applications. It features a polyurethane (PU) inner tube reinforced with a double braid of polyester yarn, combining PU flexibility with the braid's resistance to pressure, abrasion and bursting. It is primarily used with spraying equipment, solvent transfer lines and pneumatic systems subject to high pulsating pressures. The reinforcement helps limit hose expansion and extend service life. The catalog ordering code for this series has five parts: model (SJPS), braid type (B), outer diameter, inner diameter and length (m). For example, SJPS-B-08-50-100m specifies an 8mm outer diameter, a 5.0mm inner diameter and 100 meters per roll. Common outer diameters are 8, 12 and 16mm, with rolls typically available in 50m and 100m lengths. Select the inner and outer diameters to suit the working pressure, burst pressure, medium (solvent/paint/compressed air) and hose fitting size. Working and burst pressures decrease as the outer diameter increases; refer to the applicable polyurethane tubing and polyester air hose specification tables for exact values.