Transmission Accessories

06B Shenma Finished Bore Sprocket
The 06B (3/8-inch) Shenma finished bore sprocket is machined from 45# round steel, with induction-hardened teeth and a blackened surface for high wear resistance and strength. It is suitable for use with standard 06B roller chains. Available with 10 to 20 teeth, the sprockets have pitch diameters of 30.8-60.8mm, outside diameters of 34-64mm, hub diameters of 20-43mm, overall lengths of 22-24mm, and weights of 0.08-0.32kg. Finished bore options include 10, 12, 14, 15, 16, 17, 18, 20, and 25mm to suit different shaft diameters. All models listed in the table are in stock and available for same-day shipping. Packaging options include cartons, wooden crates, and pallets.

06B Series Shenma Standard Sprocket
The 06B series (3/8-inch) Shenma standard sprocket is designed for single-strand 06B roller chain with a 9.525mm pitch. It is made entirely of forged A3 steel, with induction-hardened teeth for high surface hardness and wear resistance. It is suitable for low- to medium-speed drives in general machinery, conveyor lines, packaging machinery and agricultural machinery. The primary specification is tooth count, with 55 options from 9T~72T. As the tooth count increases, the outside diameter Do ranges from 30.0mm to 221.0mm and the hub diameter BD from 19mm to 85mm. Total thickness B ranges from 18~25mm, and bore diameter d is available in six sizes: 8, 10, 12, 14, 16 and 20mm. Individual weights range from 0.05kg to 2.44kg. Select the model by the required tooth count (transmission ratio/linear speed), then check the bore diameter against the shaft diameter. The bore can be enlarged or a keyway machined if necessary. All specifications listed in the table are in stock and available for same-day shipping, packed in cartons, wooden crates or on pallets.

Shenma 06B 3/8-inch Duplex Standard Sprocket Series
The Shenma 06B (3/8-inch) duplex standard sprocket fits 06B-2 duplex roller chain with a 9.525mm pitch. Made from forged A3 steel, it has induction-hardened teeth for good surface hardness and wear resistance, making it suitable for low- to medium-speed drives. The range covers 10~50 teeth, with outside diameters of 34.0~154.0mm, hub diameters of 20~80mm, overall thicknesses of 24/28/35mm, a tooth width of 15.4mm, bore diameters of 8~16mm, and unit weights of 0.07~2.65kg. All sizes are in stock and can ship as early as the same day. Packaging options include cartons, wooden cases, and pallets. These sprockets are widely used in conveyors, packaging machinery, agricultural machinery, and general industrial drives.

08B Shenma Finished Bore Sprocket
The 08B (4 fen) Shenma finished bore sprocket has a 12.7mm pitch, 8.51mm roller diameter, 7.95mm inner width and 7.2mm tooth width. It fits 08B single-strand roller chain. Available with 9T~40T teeth, it has an outer diameter of 41~166.5mm, pitch diameter of 37.13~161.87mm, hub diameter of 24~62mm, overall length of 22~28mm and unit weight of 0.11~1.9kg. The sprocket is machined from 45# round steel (45# steel), with induction-hardened teeth and a black oxide finish for rust protection. Depending on the tooth count, finished bore (hub bore) options include 10, 12, 14, 15, 16, 17, 18, 19, 20, 22, 25, 28, 30, 35, 38, 40, 42 and 45mm. Large and small hubs can be selected separately. Depending on the bore size, 4×1.8 or 5×2.3 keyways and M4 set screw holes are also available. All specifications listed in the table are in stock and available for same-day dispatch. Packaging options include cartons, wooden crates and pallets.

08B Series Double-Row Sprockets
The 08B double-row sprocket, also known as a 4-fen double-row sprocket, is a standard Shenma sprocket made from forged A3 steel. Its teeth are induction hardened for good wear resistance and load capacity. It is suitable for 08B double-row roller chain drives. The catalog lists standard sizes from 10 to 60 teeth, with dimensions including outside diameter Do, boss diameter BD, total thickness C and bore diameter d. All models listed in the series are in stock and available for same-day shipping. Packaging options include cartons, wooden cases and pallets.

08B 45# Steel Standard Double-Single Sprocket
The Shenma 08B (4-fen) standard double-single sprocket is machined from 45# steel round bar, with induction-hardened teeth, for drive applications using 08B chain. The catalog lists standard sizes with 11–28 teeth, outside diameters of 50–118mm, hub diameters of 29–97mm, a total thickness of 30mm, an extended version thickness of 35mm, row spacing of 23mm, extended version row spacing of 28mm, bore diameters of 10–18mm, and an approximate unit weight of 0.30–2.21kg. All models listed in the table are in stock and available for same-day shipping. Packaging options include cartons, wooden crates, or pallets.

10A/12A Shenma Finished-Bore Sprockets
Shenma finished-bore sprockets (10A/50B, 12A/60B) are suitable for 5-fen (10A) and 6-fen (12A) roller chain drives. Made from 45# steel, they have induction-hardened teeth and a blackened finish for good wear resistance and fatigue strength. The 10A/50B chain has pitch P=15.875mm, W=9.53mm, DR=10.16mm and T=8.7mm. Sprockets have 10~35 teeth, an outer diameter of 57.5~184mm, a pitch diameter of 51.37~177.10mm, a hub diameter of 35~75mm, an overall length of 24~31mm, a unit weight of 0.27~2.2kg, a finished bore of 10~45mm, a chain groove width of 4.1mm and an M4 screw hole. The 12A/60B chain has pitch P=19.05mm, W=12.7mm, DR=11.91mm and T=11.7mm. Sprockets have 9~30 teeth, an outer diameter of 64~190mm, a pitch diameter of 55.70~182.25mm, a hub diameter of 36~75mm, an overall length of 27~36mm, a unit weight of 0.41~3.5kg and a finished bore of 1

10A Series (5/8-inch) Shenma Standard Sprocket
The 10A series (5/8-inch) Shenma standard sprocket is designed for roller chain drives and fits 10A (5/8-inch) chains. The catalog lists the outside diameter D0, hub diameter BD, overall thickness BL, bore diameter d, and weight for sprockets with 9~76 teeth, making it easy to select a model based on the transmission ratio and available installation space. The sprocket has a one-piece construction with a hub and is suitable for general industrial drives, conveying equipment, agricultural machinery, and similar applications. Confirm the required dimensions based on the chain specification, tooth count, shaft diameter, and load.

10A Double-Row Sprocket (5/8 inch)
The 10A (5/8 inch) standard double-row sprocket is compatible with ISO 10A / ANSI 50 double-row roller chains (15.875mm pitch). Made from forged A3 steel, it has induction-hardened teeth for high surface hardness and wear resistance. It is suitable for low- to medium-speed drives in general machinery, conveyor lines, packaging equipment and food machinery. The catalog includes 37 sizes with 10~46 teeth: tooth outside diameter 58.0~238.0mm, hub diameter 30~100mm, overall thickness BL 39.00~50.00mm, total tooth thickness C 26.0mm, bore diameter 10~25mm, and unit weight 0.31~14.88kg. All sizes are in stock and available for same-day dispatch, packaged in cartons, wooden cases or on pallets. Select a size based on chain number 10A-2 and the required tooth count. As the tooth count increases, the outside diameter, weight and torque capacity increase accordingly, while the transmission ratio decreases.

10A Series 5/8-Inch Single-Strand Standard Sprocket, 45# Steel
The 10A series 5/8-inch single-strand standard sprocket is made of 45# steel and fits ANSI 10A single-strand roller chain with a 15.875mm pitch. It is available in 40 sizes with 10~50 teeth. The teeth are induction hardened for good surface hardness and wear resistance, making the sprocket suitable for low- to medium-speed drives in general machinery, conveyor lines, packaging equipment and other applications. For each tooth count, the catalog lists the outside diameter Do (57.5~259mm), hub diameter BD (40~100mm), overall thickness BL (28~40mm), bore diameter d (10~20mm) and weight (0.27~6.72kg). Select a sprocket by tooth count and bore size; the bore can be further machined with a keyway or modified as needed. All sizes listed in the table are in stock and available for same-day dispatch, packed in cartons, wooden cases or on pallets.

10A 45# Steel Standard Double-Single Sprocket
The Shenma 10A (5/8-inch) standard double-single sprocket is machined from 45# round steel, with induction-hardened teeth for high surface hardness, wear resistance and durability. It is suitable for 10A double-row roller chain drives with a 15.875mm pitch. Sizes range from 11~30 teeth, with outside diameters of 63~158mm, hub diameters of 35~130mm, a standard overall thickness of 35mm (40mm for the extended version), row spacing of 27mm (32mm for the extended version), bore diameters of 12~20mm and unit weights of 0.51~4.82kg. The full range is regularly stocked and available for same-day dispatch, with carton, wooden crate or pallet packaging.

12A Shenma Finished Bore Sprocket
The 12A (6 fen) Shenma finished bore sprocket is a single-strand, standard-bore plate sprocket compatible with 12A/60B roller chains (chain pitch P=19.05mm, inner plate width W=12.7mm, roller diameter DR=11.91mm, and chain plate thickness T=11.7mm). Made from 45# steel, it has high-frequency hardened teeth for a hard, wear-resistant tooth surface and a black oxide finish for rust protection. Finished (pre-machined) bore sizes are available in 18 options: 10, 12, 14, 15, 16, 17, 18, 20, 22, 25, 28, 30, 32, 35, 38, 40, 42, and 45mm. The bore can be enlarged as needed or fitted directly. Corresponding keyway B sizes are 4×1.8 (bore diameters 10, 12) and 5×2.3 (bore diameter 14), with threaded holes M of M4 and M5, respectively. Tooth counts range from 9~30, outside diameter Do from 64mm to 190mm, pitch diameter D1 from 55.70mm to 182.25mm, and hub diameter BD from 36~75mm (larger tooth counts have dual hubs of 56/67, 57/67, 64/67, etc.); overall length

12A Series (6-fen) Shenma Standard Sprockets
The 12A series (6-fen) Shenma standard sprockets are designed for 12A/60B roller chains. They have a 19.05mm pitch, an 11.91mm roller diameter, and a 12.7mm inner plate width. The catalog provides a complete dimension table by tooth count, covering 9–60 teeth, as well as 65, 70, 75, and 80 teeth. Parameters for each tooth count include outside diameter, hub diameter, overall thickness, bore diameter, and weight, making it easy to select a sprocket based on transmission ratio and installation space. Standard sprockets are commonly used in chain drives for motor and gearbox outputs, conveyor lines, packaging machinery, and agricultural machinery, and can be paired with chains of the same pitch and suitable shaft ends. Most overall thicknesses in the table range from 27–30mm, while bore diameters vary with tooth count from approximately 12–16mm.

12A Standard Double-Row Sprocket
The 12A standard double-row sprocket, commonly known as a 6-fen double-row sprocket, has a 19.05mm pitch and is compatible with 12A double-row roller chain drives. It is available in 37 sizes with 10~46 teeth: outside diameter 70.0~372.0mm, boss diameter 40~110mm, overall thickness 45.00~60.00mm, total tooth thickness 34.0mm across all sizes, bore diameter 12~25mm, and unit weight 0.58~27.2kg. The sprocket body is made from forged A3 steel, and the teeth are induction hardened for wear and impact resistance. It is suitable for medium- and low-speed, heavy-duty drives in conveyor lines, agricultural machinery, packaging equipment, and general industrial equipment. All sizes are in stock and available for same-day dispatch, with packaging in cartons, wooden cases, or on pallets. Select the appropriate size based on the chain specification (12A double-row), required tooth count, and equipment shaft diameter (bore d). Higher tooth counts provide smoother operation but increase the outside diameter and weight.

12A Double-Row Standard 45# Steel Sprocket
The Shenma 12A (6 fen) double-row standard 45# steel sprocket is designed for 12A double-row roller chain with a 19.05 mm pitch. It is suitable for applications requiring double-row chain drives, higher torque transmission or a higher safety factor. The sprocket body is turned from 45# round steel, and the teeth are induction hardened for high surface hardness and wear resistance, extending their service life with the chain. The catalog lists 27 common sizes from 10 to 36 teeth, along with outside diameter Do (70~251 mm), hub diameter BD (42~110 mm), overall thickness BL (52~60 mm), total tooth width C (34.1 mm), bore diameter d (12~25 mm) and unit weight (0.68~12.77 kg), making selection and drive calculations easier. The full range is regularly stocked and available for same-day dispatch. The bore can be further machined as needed, including enlargement and keyway cutting. Packaging options include cartons, wooden cases or pallets.

14M Timing Belts
14M curvilinear-tooth timing belts feature a 14 mm pitch and a curved tooth profile for smooth, quiet power transmission. This range includes a variety of standard lengths from 784 mm to 10,072 mm, making it suitable for industrial automation applications such as machine tools, packaging machinery, and printing machinery. Made from premium-quality chloroprene rubber with fiberglass tensile cords, these belts offer high tensile strength, wear resistance, and maintenance-free operation without lubrication. Models are named by pitch length and tooth profile; for example, 784-14M denotes a 14M timing belt with a pitch length of 784 mm.

14M Series Curvilinear Tooth
14M-series timing belts have a 14 mm pitch and a curvilinear tooth profile, making them suitable for medium- to high-torque transmission. This page lists 25 sizes, from 14M-784 to 14M-1610, with tooth counts ranging from 56 to 115 and standard lengths from 784 mm to 1,610 mm. Designed with a standard tooth profile, these belts are compatible with 14M toothed pulleys and are widely used in machine tools, automation equipment, packaging machinery, and other applications. For the outside adjustment allowance, see Table 11-b in the Design section. This applies to models including S8M, S14M, 8M, and 14M.

Shenma 16A Series (1-inch) Standard Sprockets
Shenma 16A series (1-inch) standard sprockets are single-strand sprockets with an integral hub, designed for roller chains with a 1-inch pitch (25.4mm, corresponding to the ANSI 80 series). They are widely used in conveyor lines, packaging machinery, agricultural machinery, and general power transmission systems. The catalog lists 47 common tooth counts from 9T to 65T, with tooth count as the sole specification variable. For each size, it provides the outside diameter Do (85.0~536.0mm), hub diameter BD (48~110mm), overall thickness BL (31.0~45.0mm), bore diameter d (14/16/18/20/25mm), and unit weight (0.58~17.80kg). Sprockets with fewer teeth have smaller bores and thinner bodies, while those with more teeth have thicker bodies and larger hubs for rigidity. Select the tooth count based on the transmission ratio, center distance, and chain speed, then choose a bore to match the shaft diameter or machine a keyway as needed.

16A Standard Duplex Sprocket
The 16A standard duplex sprocket, commonly known as an 8-fen duplex sprocket, is designed for 16A duplex roller chain drives with a 25.4mm pitch. It is machined in one piece from forged A3 steel, with induction-hardened teeth for high surface hardness and wear resistance. It maintains consistent meshing accuracy and service life under medium to heavy loads and continuous operation. Standard sizes range from 10T to 50T, with outside diameter Do from 94.0mm to 416.0mm, boss diameter BD from 52~120mm, overall thickness BL from 65~73mm, and total tooth thickness C of 43.0mm throughout. Standard bore diameters d are 16mm and 20mm; lower tooth-count sizes are also available with a 16mm bore. Unit weight ranges from 1.50~37.40kg. The entire range is normally stocked for same-day dispatch and is packed in cartons, wooden cases or on pallets. These sprockets are suitable for conveyors, packaging machinery, agricultural machinery and general industrial drive shafts. The same page also lists specifications for 6-fen (12A) duplex sprockets for comparison only; they are not part of this series.

Shenma 2052 Series Double-Pitch Sprockets
Shenma 2052 series double-pitch sprockets fit 2052/210AL double-pitch roller chains (chain pitch 31.75mm, inner chain width 9.4mm, roller diameter 19.05mm, tooth width 8mm). Available with 8~20 teeth, an outside diameter of 97~217mm, hub diameter of 53~80mm, overall thickness of 35mm, bore diameter of 16~20mm, and unit weight of 0.70~3.31kg. Made of forged A3 steel, the sprockets have induction-hardened teeth for wear resistance and high load capacity. They are suitable for double-pitch chain drives in conveyor lines, packaging machinery, agricultural machinery, and other applications. All models listed in the table are in stock and available for same-day shipment, with carton, wooden case, or pallet packaging.

Shenma 2062 Series Double-Pitch Sprockets
Shenma 2062 series double-pitch sprockets fit 2062/212AL double-pitch roller chains. Chain pitch is 38.1mm, chain inner width is 12.57mm, roller diameter is 22.23mm, and tooth width is 11mm. Available in 26 tooth counts from 8~33 teeth, with outside diameters of 113.0~443.0mm, hub diameters of 70~90mm, an overall thickness of 40mm, bore diameters of 18~30mm, and a weight of approximately 1.50~14.12kg per piece. The sprockets are made from forged A3 steel with induction-hardened teeth and are suitable for conveying, packaging, agriculture, and general industrial drives. All specifications listed in the table are in stock and available for same-day dispatch, packaged in cartons, wooden cases, or on pallets.

2082 Series Double-Pitch Sprockets
Shenma 2082 series double-pitch sprockets are compatible with 2082/216AL double-pitch roller chains (chain pitch 50.8mm, inner width 15.75mm, roller diameter 28.58mm). They are available with 8~96 teeth, outside diameters of 152~1848mm and hub diameters of 75~100mm. All models have a total thickness of 45mm, with three bore sizes: 20mm, 25mm and 30mm. Each sprocket weighs approximately 2.3~96kg. Dimensions correspond to the tooth count. Select the sprocket according to the chain model and required tooth count; the bore and keyway can be machined to suit the shaft diameter. Suitable for low-speed, large-pitch chain drives in conveyor lines, packaging, logistics, agriculture and livestock applications. Tooth induction hardening and other strengthening treatments, as well as custom designs, are available.

Shenma 20A Series (1.2 in) Standard Sprockets
Shenma 20A series (1.2 in) standard sprockets are designed for 100B/20A roller chains, with a sprocket pitch of 31.75 mm and a roller diameter of 19.05 mm. They are suitable for single-strand roller chain drives. The sprockets have a one-piece construction with a hub and are available in 9~43 tooth sizes: outside diameter 107.0~447.0 mm, hub diameter 60~130 mm, overall thickness 40.0~45.0 mm, bore diameter 18/20/25/30 mm, and unit weight 1.20~28.00 kg. As the tooth count increases, the outside diameter increases linearly with the pitch, while hub and bore diameters increase in steps to accommodate greater transmitted torque. The sprockets have a plain bore that can be machined with a keyway or set screw hole as needed. They are suitable for medium- to heavy-duty, low-speed drives in conveyors, packaging machinery, agricultural machinery, and similar equipment. Select the bore size according to the chain specification (20A/100B), required tooth count, and shaft diameter. Too few teeth will increase the polygonal effect, so select the tooth count for the actual operating conditions.

20A Series Standard Double-Row Sprocket (10-fen Double-Row)
The Shenma 20A standard double-row sprocket is a 10-fen double-row roller chain sprocket with a 31.75 mm pitch, designed for double-row roller chain drives. Its body is made from forged A3 steel, and its teeth are induction hardened for better tooth surface wear resistance than standard quenched and tempered parts. Standard sizes range from 10 to 30 teeth, with tooth outside diameters of 117.0~318.7 mm, hub diameters of 67~120 mm, overall thickness BL of 75/78/80 mm, total tooth thickness C of 53 mm, and bore diameters d of 20/25/30 mm (smaller bores are paired with lower tooth counts). Select by chain size 20A, double-row configuration, required tooth count, and shaft diameter. Common sizes across the range are in stock and available for same-day shipment. Packaging options include cartons, wooden crates, or pallets. Suitable for medium- to heavy-duty drives in conveyor lines, packaging machinery, agricultural machinery, mining equipment, and other applications.

Shenma 24A Series (1.5-inch) Standard Sprockets
Shenma 24A series (1.5-inch) standard sprockets are single-strand roller chain sprockets compatible with 120B/24A chains. They have a chain pitch P=38.1mm, roller diameter W=25.4mm, roller bore DR=22.23mm, and sprocket body thickness T=23mm. Available with 10~38 teeth, they have an outside diameter Do of 137.0~477.0mm, boss diameter BD of 75~135mm, overall thickness BL of 45~55mm, bore diameter d of 20~30mm, and individual weight of 2.48~32.20kg. Different bore and tooth count combinations can be selected as needed. Made from forged A3 steel, the sprockets have induction-hardened teeth for good surface hardness and wear resistance, with strong load capacity under impact. They are widely used in conveying machinery, agricultural machinery, packaging lines, and general industrial drives. All models listed in the table are in stock and can ship as soon as the same day, packed in cartons, wooden cases, or on pallets.

24A Standard Double-Row Sprocket (12-fen Double-Row Series)
The Shenma 24A (12-fen) standard double-row sprocket is made from forged A3 steel, with induction-hardened teeth for good surface hardness and wear resistance. It is suitable for medium- to heavy-duty drives using 24A double-row roller chain with a 38.1mm pitch. The catalog covers 16 sizes with 10~25 teeth: outside diameter 137.0~319.0mm, hub diameter 78~130mm, overall thickness 93.00~96.00mm, total tooth width 68.3mm, and bore diameters of 25mm or 30mm. Select primarily by tooth count: both the outside diameter and pitch circle increase as the number of teeth increases. Choose according to the required transmission ratio and available installation space. All sizes listed in the table are in stock and available for same-day shipping. Packaging options include cartons, wooden cases and pallets. Common applications include chain drives on conveyor lines, packaging machinery, agricultural machinery and construction equipment. The sprocket can be paired with double-row roller chain of the same pitch.

25 Series (1/4-inch) Standard Sprocket
The Shenma 25 Series (1/4-inch) standard sprocket is a single-strand sprocket with a standard tooth profile, designed for 1/4″ (6.35 mm) pitch roller chain. The catalog uses tooth count as the primary selection parameter, with 57 sizes ranging from 8 to 64 teeth. The outside diameter Do ranges from 19.5 mm to 131.5 mm, the hub diameter BD from 14 to 132 mm, and the overall thickness BL is 15 mm throughout. Bore diameter d is 6, 8, 10, or 12 mm depending on the tooth count, and unit weight ranges from 0.02 to 0.88 kg. Select the tooth count based on the transmission ratio and available installation space, then check the hub diameter, overall thickness, and bore size. Use with matching 1/4-inch pitch chain. Typical applications include small reduction drives and drive stations in conveying, packaging, textile, and automation equipment.

2M Series Timing Belts
Jaguar (Shenma Transmission) 2M series timing belts are toothed drive belts that mesh with pulleys for synchronous, slip-free transmission. They are widely used in automation equipment, packaging machinery, printers, and small speed-reduction drives. The catalog provides tooth profile diagrams and model designation details to guide selection. The key parameters are tooth profile (pitch), tooth count, and pitch length: the 2M type has a 2mm pitch, the 3M type has a 3mm pitch, and the XH type has a 22.225mm pitch (imperial tooth profile). Models are designated as “pitch length code-tooth profile code.” For example, 240-2M is a 2M profile timing belt with a pitch length of 240mm, while 300-3M is a 3M profile timing belt with a pitch length of 300mm. Belt width is specified separately by a width code; common widths include 3.5mm and 10mm. The same pitch length may be available in different widths and with different tooth counts. Catalog examples cover common sizes with pitch lengths of 81~744mm and tooth counts of 27~372. Standard items are regularly stocked for short lead times and can be selected and ordered directly by pitch length and tooth profile.

Shenma 35 Series (06C) Standard Sprocket
The Shenma 35 Series (06C) standard sprocket is designed for 3/8-inch pitch (06C) roller chains. Its tooth profile conforms to 06C chain specifications, with a pitch P of 9.525mm, roller diameter DR of 5.08mm, inner plate width W of 4.78mm, and tooth thickness T of 4mm. It is suitable for light-duty drives, conveyor lines, packaging machinery, and small automation equipment. Select a sprocket based on parameters such as tooth count, outside diameter, hub diameter, overall thickness, bore diameter, and weight.

3GT Series Timing Pulleys
High-molybdenum 3GT timing pulley with a 3GT tooth profile, designed for 3GT timing belts. Made of stainless steel, with an optional flange. Available in a range of bore diameters and widths for precision drive applications.

3M Series 3M
3M-series polyurethane timing belts with a 3 mm pitch and trapezoidal teeth. Available in lengths from 105 to 843 mm, with 35 to 281 teeth. Designed for high-precision drive systems, they are wear-resistant, quiet, and maintenance-free, with no lubrication required. Widely used in automation equipment, CNC machine tools, packaging machinery, printing machinery, and other applications.

3M toothed timing belt
The 3M toothed timing belt has a 3 mm pitch and a curvilinear tooth profile, making it suitable for low-power precision drives. It offers low noise and high transmission efficiency, with smooth engagement between the belt teeth and pulleys. The series is available in a range of pitch lengths from 90 mm to 1,063 mm, with 30 to 356 teeth to suit different center distances. It is widely used in office automation equipment, medical devices, textile machinery, packaging machinery, and more.

3M Timing Pulley
Tongcheng (Shenma Transmission) 3M timing pulleys are a standard B-type series designed for 3M curvilinear-tooth timing belts with a 3 mm pitch. Pulley specifications include tooth count, tooth outside diameter D0, pitch diameter, tooth-edge outside diameter D0, tooth height H and bore diameter B. Various bore sizes are available. These pulleys are commonly used in compact precision drives, office equipment, packaging machinery and automation systems. Precision-finished tooth surfaces ensure smooth belt engagement, an accurate transmission ratio and low noise. Select the pulley by tooth count and required bore diameter B; customization is available to suit the shaft diameter and installation space.

3M Timing Belt
The 3M timing belt is a curvilinear tooth (HTD) belt in Shenma Transmission's “Jaguar” series. With a 3.0mm pitch, it is designed for light-load, high-speed drives. Its flat back and wear-resistant tooth surface make it suitable for synchronous drives in office equipment, printers, packaging machinery, and small automation equipment. Models are designated by “pitch length-model”; for example, 300-3M is a 3M belt with a pitch length of 300mm. Pitch length = number of teeth × 3mm. The catalog lists pitch lengths from 81mm (27 teeth) to 3390mm. The complete ordering code has three parts: pitch length code, model (pitch code 3M), and belt width code. For example, 670-5M-15 specifies a pitch length of 670mm, a 5M model (5.00mm pitch), and a belt width of 15.0mm. For this series, the format is “pitch length-3M-belt width code”. Jaguar timing belts are regularly stocked and can ship as early as the same day.

5M Timing Belt Series
The 5M series timing belt has a 5 mm pitch and trapezoidal teeth, making it suitable for precision drives and light-duty conveying. Standard lengths range from 120 mm to 730 mm, with 24 to 146 teeth, in 5 mm increments (one tooth per step). It is typically made of neoprene or polyurethane, with an internal fiberglass tensile layer for wear resistance and low stretch. Widely used in automation equipment, office machinery, and packaging machinery, it provides precise synchronous transmission. A comprehensive range of sizes accommodates different center distances.

5M Curvilinear-Tooth Timing Belt
The 5M curvilinear-tooth timing belt has a 5 mm pitch and is widely used in precision drives, industrial automation, packaging machinery, and other applications. Its tooth profile is designed to improve meshing, reduce noise, and increase transmission efficiency. Specifications are identified by pitch length (mm); for example, 175-5M denotes a 5M timing belt with a pitch length of 175 mm. A range of lengths is available to suit different center distances.

5M Timing Pulleys
5M timing pulleys serve as driving or driven pulleys in curvilinear-tooth (HTD) timing belt drive systems. With a tooth pitch of 5mm, they are used with 5M timing belts to provide slip-free transmission at a constant ratio. This page covers the B-type standard bore series, featuring a standard round bore with a keyway or set screw hole for general-purpose drive applications. Catalog specifications are grouped by tooth count. Key dimensions include tooth count, outside diameter D, pitch diameter, tooth thickness, and inner groove width (belt groove width). Users can select the tooth count and bore type according to the required drive ratio and shaft diameter. These pulleys are commonly used in packaging machinery, printing equipment, textile machinery, automated conveyor lines, and small motor speed reduction drives. They are typically made of aluminum alloy or medium-carbon steel, with an anodized or black oxide finish. They offer smooth, quiet operation, require no maintenance, and provide a long service life. When selecting a pulley, confirm the tooth count, belt width, and bore size to ensure compatibility with the timing belt and shaft.

5M Timing Belt
The Jaguar 5M timing belt is a curvilinear-tooth (HTD) belt with a pitch of 5.00mm. Its model designation consists of three parts: pitch length, pitch code, and belt width. For example, 670-5M-15 indicates a pitch length of 670mm, a pitch code of 5M, and a belt width of 15.0mm. The belt is molded as one piece, with wear-resistant fabric covering the tooth surfaces. It offers accurate transmission ratios, slip-free operation, low noise, resistance to flex fatigue, and maintenance-free operation without lubrication. It is suitable for low- to medium-torque, medium- to high-speed drives in packaging machinery, printing machinery, textile machinery, CNC machine tools, and office automation equipment. The catalog lists models and corresponding tooth counts by pitch length, covering approximately 180~1480mm. Tooth count varies with pitch length, and belt width can be selected to match the equipment's pulley width (common widths are 10/15/20mm). When selecting a belt, confirm that the pitch length, tooth count, belt width, and pulley tooth profile are compatible.

7000C Series Miniature Precision Angular Contact Ball Bearings
The 7000C Series comprises miniature precision angular contact ball bearings with a 15° contact angle, designed for high-speed, high-precision applications such as machine tool spindles, precision instruments, and robotic joints. Made from high-quality bearing steel, these bearings offer low vibration, low noise, and high-speed performance. Main size range: 3–9 mm bore, 10–26 mm outside diameter, and 4–8 mm width. Dynamic load ratings range from 0.5 to 4.5 kN, and static load ratings from 0.5 to 2.45 kN. The limiting speed with grease lubrication can exceed 100,000 rpm. A variety of models are available to meet different load and speed requirements.

719 Series Ultra-Precision Angular Contact Ball Bearings
This series of ultra-precision angular contact ball bearings features model numbers beginning with 719. The suffix C indicates a 15° contact angle, while AC indicates a 25° contact angle. Designed for high-speed, high-precision applications such as machine tool spindles, precision instruments, and aircraft engines. Available in a range of sizes, with bore diameters of 35–190 mm, outside diameters of 55–260 mm, and widths of 10–33 mm. Dynamic load ratings range from 10.4 to 162.8 kN, and static load ratings from 64.1 to 260.8 kN (for select models). High limiting speeds reach 40,000 rpm with grease lubrication and 80,000 rpm with oil lubrication. Manufactured from high-quality bearing steel and available in P4/P2 precision classes, these bearings offer low vibration, low noise, and long service life.

760 Series Angular Contact Ball Bearings
760 series angular contact ball bearings feature a large 60° contact angle and an increased number of balls, significantly improving axial rigidity. Compared with tapered roller bearings or thrust ball bearings, they require less starting force and enable high-precision operation. The series comprises the 7602 and 7603 subseries, with ball/rolling-element-guided polyamide resin cages (Tn1) and P4 precision. Two designs are available: sealed (TDP), with non-contact seals on both sides to simplify the host machine's sealing design, and open (TVP). Bore diameter d ranges from 12~55 mm, outside diameter D from 32~110 mm, and width B from 10~27 mm. Basic dynamic load ratings range from 11.6~69.5 kN and static load ratings from 12.5~127 kN. Limiting speeds are 5000~17000 r/min with grease lubrication and 6700~24000 r/min with oil lubrication; mass ranges from 0.04~1.33 kg. They are suitable for machine tool spindles and other applications requiring high rigidity, high precision, and low starting torque.

8M Timing Belt
The 8M timing belt is an HTD profile belt with an 8 mm pitch, commonly used for precision synchronous power transmission. This series is available in a range of standard lengths, with pitch lengths from 264 mm to 1,944 mm and corresponding tooth counts from 33 to 221. Made from high-quality rubber and fiberglass cords, these belts offer high transmission efficiency, low noise, and no need for lubrication. They are widely used in packaging machinery, printing equipment, electronic devices, and automated production lines. Custom widths and lengths are available. For specifications, refer to the model code (for example, 264-8M indicates a pitch length of 264 mm and 33 teeth).

8M Series Timing Belts
8M series curvilinear-tooth timing belts have an 8 mm pitch and are designed for general industrial drive applications. Available in a range of standard lengths from 184 mm to 2,048 mm, with 23 to 256 teeth. Widely used in automation equipment, conveyor machinery, printing and packaging, and other applications requiring precise synchronized drive. Made with high-quality rubber and fiberglass tensile cords for high strength and excellent wear resistance.

8M Timing Pulleys, Type A Finished Bore Series
The 8M Type A finished-bore timing pulley series features a curvilinear tooth profile, an aluminum alloy body and galvanized iron flanges. Each pulley comes with a finished bore and set screws for direct installation. The range includes 17 sizes with 15~60 teeth: tooth outside diameters of 36.83~151.42mm, pitch diameters of 38.20~152.79mm, flange outside diameters of 42~160mm and flange inside diameters of 28~135mm. Total widths are 31/37mm, with groove widths of 27/32mm. Finished bore sizes vary by tooth count and include 10, 12, 14, 15, 16, 17, 18, 19, 20, 22, 24, 25 and 40mm; set screws are M4 or M5. Suitable for power transmission and positioning with 8mm-pitch curvilinear-tooth timing belts in packaging, printing and automated conveyor lines. All specifications listed in the table are in stock, with carton or wooden crate packaging available.

8M Timing Pulleys
8M timing pulleys are metric curvilinear-tooth pulleys with an 8 mm pitch, designed to mesh with 8M timing belts for synchronized power transmission in industrial equipment. This page covers the Type B standard-bore series, which has a standard bore for general-purpose shaft mounting. The catalog lists dimensions by tooth count, including tooth outside diameter D0, tooth inside diameter D0, tooth outside diameter D1, tooth inside diameter D1, and bore diameter D1, making it easier to select a pulley by outside diameter, flange dimensions, and mounting bore. Common applications include factory automation, conveyor lines, and packaging machinery. The same page also includes other series, such as XL, which are not part of this series.

8YU Timing Pulley
8YU high-torque curvilinear-tooth timing pulleys feature a curved tooth profile for high torque transmission and low noise. Available in a range of pulley codes, including BLA, BLH, and BSP, with tooth counts from 20 to over 200 and nominal widths from 16 to 50 mm, as well as other specifications to suit different bore sizes. Ideal for industrial automation drive systems.

8YU Series Idler Pulleys
8YU series idler pulleys are designed for synchronous belt drive systems and feature an 8YU tooth profile. They are available in two configurations: center-bearing and dual-side-bearing. Material options include aluminum alloy (BLAZ) and 45Cr (BSYC), with surface treatment. Key specifications include the number of teeth (20 or 30), nominal width (150 mm, 200 mm, or 250 mm), and shaft diameter d (20 mm or 25 mm).

8YU timing belt
The 8YU timing belt has an 8 mm pitch and a curvilinear (parabolic) tooth profile, making it suitable for medium-torque transmission. Its tooth design reduces meshing noise and provides smooth, precise, wear-resistant operation. The belt uses fiberglass tensile cords and a specially compounded rubber body, offering good resistance to oil and dirt. It is widely used in automation equipment across the textile, packaging, food processing, mining, and other industries.