Universal joint

CPKP Series Ball-Fork Universal Joint Coupling

CPKP Series Ball-Fork Universal Joint Coupling

The description states that when the two shafts are not collinear and their axes are at an angle, the connected shafts can rotate continuously while reliably transmitting torque and motion. It offers a wide angular compensation range, with a maximum operating angle of 30°. Its design is simple, easy to assemble and disassemble, telescopic, and highly efficient in transmission. The text also notes that the bore can be machined with a keyway, a square bore, or a four-sided square bore as required.

CPWG-CPWX-CPWS Series Single/Double Telescopic Cross Universal Couplings

CPWG-CPWX-CPWS Series Single/Double Telescopic Cross Universal Couplings

Features listed on the page: lightweight, high transmission efficiency, long service life, stable performance, wear-resistant, and low backlash; needle roller bearings allow speeds of up to 4000 rpm and provide a large angular compensation range. The specifications table lists aluminum alloy as the material and anodizing as the surface treatment.

CWA-CPWW Series Small Cross-Shaft Universal Couplings

CWA-CPWW Series Small Cross-Shaft Universal Couplings

Suitable for drive applications connecting two shafts whose axes lie in the same plane and form an angle β≤45°, transmitting a nominal torque of 11.2–1120 N·m. The CPWA type is single-joint, while the CPWW type is double-joint; each joint has a maximum articulation angle of 45 degrees. Available with either plain bearings or needle-roller bearings, with maximum speeds of 100 and 4000 rpm, respectively. Quick locking is also available. Bore connection options: plain round bore, hex bore, and square bore. Offers high concentricity during operation and long service life. Made of 42CrMo; the standard surface treatment is black oxide. Non-standard surface treatments and custom special materials are also available.

CPHP-CPZHP Series Precision Miniature Universal Joint, Standard Telescopic Type

CPHP-CPZHP Series Precision Miniature Universal Joint, Standard Telescopic Type

The maximum angle of rotation per joint is 45°. Connects shafts with greater spacing. Finished dimensions have an H7 tolerance. Keyways, hexagonal bores, and square bores can be machined as required. Calculation of installation length L and X (stroke): stroke X ≤ (Lmax-2.L2-B)/2, Lmin ≥ (Lmax+2.L2+B)/2. Minimum dimension Lmin=L2+B+X+L2.

CPL Series Precision Miniature Universal Joint Coupling, Long-Bore Telescopic Type

CPL Series Precision Miniature Universal Joint Coupling, Long-Bore Telescopic Type

Product features: Finished bore with H7 tolerance; high transmission accuracy; rotation angle of 45 degrees per joint; made of high-quality 40Cr steel; smooth rotation without binding; center slider hardened to 45-50 degrees, pins carburized and hardened to 50-55 degrees. Two bearing types are available: plain and needle roller. The maximum speed is 400 revolutions per minute for the needle roller bearing type and 1000 revolutions per minute for the plain bearing type.

WJ-WS Series GB Standard Ball-Joint Universal Couplings

WJ-WS Series GB Standard Ball-Joint Universal Couplings

Ball-joint universal couplings use spherical components instead of a cross shaft to connect the driving and driven shafts. They have a simple structure, compact size, flexible operation, and are easy to maintain, making them suitable for transmitting relatively low torque. They are suitable for shaft angles β≤40° and enable the driving and driven shafts to rotate synchronously.

CPS Series Telescopic Miniature Cross-Shaft Universal Coupling

CPS Series Telescopic Miniature Cross-Shaft Universal Coupling

The maximum angle per section is 45°. Connects shafts with a greater separation. The finished bore tolerance is H7; keyways, hexagonal bores, and square bores can also be made on request. Calculation of installation length L and travel X (stroke): travel X≤(Lmax-2L2-B)/2; Lmin≥(Lmax-2L2-L+B)/2; minimum dimension Lmin=L2+B+X+L2. The standard surface treatment is black oxide. Custom non-standard designs and special materials are available to meet the requirements of special operating conditions; please contact customer service for details about custom orders.

CPCKP Series Ball-and-Fork Universal Joint Couplings

CPCKP Series Ball-and-Fork Universal Joint Couplings

Designed for two non-parallel shafts, these couplings allow the connected shafts to rotate continuously at an angle to each other while reliably transmitting torque and motion. They provide a wide angle of compensation and can be used at angles of up to 30°. The simple design features detachable joints, telescoping capability, and high transmission efficiency for easy maintenance. Finished bores are H7 and can be machined with keyways, pin holes, hexagonal bores, or square bores as required. Available in 304 stainless steel. The standard surface finish is blackened; nickel plating, zinc plating, chrome plating, and polishing are available on request.

CPWA-CPWW Miniature Cross-Shaft Universal Couplings

CPWA-CPWW Miniature Cross-Shaft Universal Couplings

CPWA-CPWW miniature cross-shaft universal couplings are suitable for drive applications connecting two shafts whose axes lie in the same plane and form an angle of β ≤ 45°. They transmit nominal torques of 11.2–1120 N·m. The CPWA type has a single joint, while the CPWW type has two joints; each joint allows an articulation angle of 45°. Available with either plain bearings or needle roller bearings, they can reach speeds of 1,000 and 4,000 rpm, respectively, and can be fitted with a quick-lock mechanism. Bore connection options include round, hexagonal, and square bores. They offer high concentricity during operation and a long service life. Made from premium 42CrMo alloy steel, they are typically finished with black oxide or chrome plating and supplied with set screws. The two end bores can be freely combined from smaller to larger diameters. Bores are machined to standard H7/H8 tolerances, and custom specifications are available. Multiple sizes are offered, from CPWA1 to CPWW4, to suit different torque and bore-size requirements.

CPWA-CPWW Miniature Cross-Shaft Universal Joint Couplings

CPWA-CPWW Miniature Cross-Shaft Universal Joint Couplings

Suitable for drive applications connecting two shafts whose axes lie in the same plane and form an angle β ≤ 45°. Transmits nominal torque of 11.2–1120 N·m. The CPWA is a single-joint type, while the CPWW is a double-joint type; each joint can articulate up to 45°. Available with either plain bearings or needle-roller bearings, with maximum speeds of 1,000 and 4,000 rpm, respectively. Quick-locking options are available. Bore connection options include round, hexagonal, and square bores. These couplings offer high concentricity during operation and a long service life. Made from 42CrMo steel, with standard black-oxide or chrome-plated finishes. Supplied with set screws. The bore diameters at the two ends can be freely selected, from smaller to larger. Bores are machined to standard H7/H8 tolerances. Custom specifications are available.

CPWD Series

CPWD Series

This series comprises standard precision miniature universal joint couplings, suitable for drive applications connecting two shafts whose axes lie in the same plane and form an angle of ≤45°. They are made from high-quality alloy steels 40Cr, 40CrNi, 20CrMo, or 20CrMnVB; SUS304 or SUS316 stainless steel is available to order. Two configurations are offered: single-joint (00CPWD) and double-joint (00CPCD), with a maximum articulation angle of 45° at each joint. The torque range for the plain-bearing version is unspecified; the needle-bearing version has half the torque capacity of the plain-bearing version. End connections can be customized with round, hexagonal, or square bores, splines, and other options. Standard surface finishes are black oxide or chrome plating, and the couplings come with set screws. Special materials or bore profiles can be custom-made to order.

CPCD Precision Miniature Universal Joint Coupling, Standard Type

CPCD Precision Miniature Universal Joint Coupling, Standard Type

The CPCD is a precision miniature double-joint universal coupling, designed for applications connecting two shafts whose axes lie in the same plane and intersect at an angle of β ≤ 45°. It is made from high-quality alloy steel, such as 40Cr and 20CrMo. All components can also be custom-made from SUS304 or SUS316 stainless steel. End connections can be customized to include internal spline bores, splined shafts, smooth shafts with pin holes or keyways, square or hexagonal shafts, and miniature flanges. Torque ratings are available in two configurations: plain bearings, with speeds up to 1,000 rpm, and needle bearings, with speeds up to 4,000 rpm. Quick-lock options are available. The coupling offers high concentricity during operation and a long service life. The standard surface finish is black oxide; custom specifications are available.

CPKA/CPKW Universal Joint Type

CPKA/CPKW Universal Joint Type

FA standard universal joints for factory automation are available in two types: double-joint (CPKA) and single-joint (CPKW). Large quantities are normally kept in stock. They respond quickly to clockwise and counterclockwise rotation and offer high transmission efficiency. The shaft sleeve has a built-in bearing and retaining pin, allowing operation at included angles of up to 30°; the maximum angle is 45° per joint. Made from 42CrMo, they are available with a choice of surface treatments: black oxide, nickel plating, zinc plating, or chrome plating. Supplied with set screws. Non-standard dimensions and special materials, such as 304 stainless steel, can be custom-made on request. Example model code: CPKA-20×67.5-10×10. The outer diameter, length, and bore dimensions are selectable, and a hole-type suffix (K, F, S, or H) can be added to indicate a special bore.

CPKA and CPKW Universal Joint Types

CPKA and CPKW Universal Joint Types

CPKA (double-joint) and CPKW (single-joint) are FA-standard universal joints for factory automation. They are normally kept in large quantities in stock, respond quickly to rotation in either direction, and offer high transmission efficiency. The shaft sleeves contain built-in bearings and retaining pins, allowing operation at angles of up to 30°; the maximum angle is 45° at each joint. Made of 42CrMo steel, they are normally finished with black oxide, with nickel, zinc, and chrome plating available on request. Optional accessories include set screws. Example model code: CPKA-20×67.5-10×10, where the outer diameter is 20 mm, the length is 67.5 mm, and the bore diameters d1 and d2 are both 10 mm. Custom bore profiles are also available (K for keyway, F for hexagonal, S for square, and H for splined).

CPKCA/CPKCW Detachable Universal Joint Couplings

CPKCA/CPKCW Detachable Universal Joint Couplings

The CPKCA/CPKCW series detachable universal joint couplings are made of 42CrMo alloy steel. Surface finishes include black oxide, nickel plating, chrome plating, and zinc plating. The couplings allow an angle between the two shafts, enabling continuous rotation and reliable torque transmission, with a large angular compensation capacity. Their simple design makes them easy to assemble and disassemble, while ensuring high transmission efficiency. Finished bores have an H7 tolerance; keyways, hexagonal bores, or square bores can be machined to order. The series includes two types, CPKCA and CPKCW, in sizes 04 to 58 to suit different shaft diameters. Set screws are included as standard, and custom specifications are available.

CPKCA and CPKCW Detachable Universal Joint Couplings

CPKCA and CPKCW Detachable Universal Joint Couplings

Detachable universal joint couplings (models CPKCA/CPKCW) connect two shafts whose axes are at an angle, enabling continuous rotation and torque transmission. They offer a wide angular compensation range, a simple design, easy assembly and disassembly, and high transmission efficiency. Finished bore tolerance is H7; keyways, hexagonal bores, and square bores can be made to order. Made of 42CrMo steel, with optional black oxide, nickel, chrome, or zinc plating. Model suffixes range from 04 to 57 and indicate the outer-diameter size series. Suitable for a wide range of industrial drive systems.

CPWR Series Universal Joint

CPWR Series Universal Joint

The CPWR series cross-slider coupling is made of 42CrMo alloy steel and can be finished with black oxide, chrome, zinc, or nickel plating. Set screws are included. The single-section universal joint features quick locking and can be disengaged. Its maximum articulation angle is 30° per section, making it suitable for drive applications requiring compensation for angular misalignment between shafts. The bore is available with H7/H8 tolerances and can be machined with special profiles such as keyways, hexagonal, square, and splined bores. Custom specifications are available. With a simple design, easy assembly and disassembly, and high transmission efficiency, it is widely used in general-purpose mechanical drive systems.

CPDR Series Universal Joint

CPDR Series Universal Joint

The CPDR series needle roller bearing coupling is made of 42CrMo steel and is available with surface treatments such as black oxide, chrome plating, zinc plating, and chrome plating. Set screws are included. It features a single universal joint with quick locking that can be disengaged, with a maximum articulation angle of 30° per joint. Finished bores are available to H7 tolerance, with options for a keyway (suffix K), hexagonal bore (F), square bore (S), or splined bore (H). Custom combinations of bore sizes are available. Designed to transmit torque and motion between two shafts set at an angle, it offers a large angular compensation capacity, easy assembly and disassembly, and high transmission efficiency.

WJ Series Ball-Joint Universal Couplings

WJ Series Ball-Joint Universal Couplings

WJ Series ball-joint universal couplings use spherical components instead of a cross shaft as the pivot, resulting in a simple, compact design that runs smoothly and is easy to maintain. Suitable for shaft angles of β ≤ 40°, they enable the driving and driven shafts to rotate synchronously. Made of 42CrMo, they are available with a black-oxide, nickel-plated, or chrome-plated finish and include set screws. They transmit relatively low torque and are suitable for light-duty applications. Suffixes can be added to the model code to indicate special bore types, including keyway (K), hex bore (F), square bore (S), and spline bore (H).

CPSP Series Universal Joints

CPSP Series Universal Joints

CPSP series spherical-joint universal couplings use spherical components instead of a cross shaft as the pivot point. Their simple, compact design offers flexible operation and easy maintenance, and they transmit low torque. Suitable for shaft angles of ≤40°, they ensure synchronized rotation of the driving and driven shafts. Each joint has a maximum articulation angle of 45°, allowing connection over a greater axial distance. Finished bore tolerance is H7. Keyways, hexagonal bores, square bores, spline bores, and other options are available on request. Made from 42CrMo, with black oxide, nickel-plated, or chrome-plated finishes available. Widely used in mechanical drive applications requiring low torque transmission and synchronized rotation.

CPHP Precision Miniature Universal Joint, Standard Telescopic Type

CPHP Precision Miniature Universal Joint, Standard Telescopic Type

The CPHP series is a precision miniature universal joint in a standard telescopic design. Each joint allows a maximum articulation angle of 45°, and the finished bore tolerance is H7. Keyways, hexagonal bores, and square bores are available on request. Made from 42CrMo steel, it can be finished with black oxide, chrome plating, zinc plating, and other treatments. The installation length L and travel X must be calculated using the specified formulas. This series is suitable for connecting shafts over greater axial distances. Custom non-standard designs and special materials are available.

CPLP Series Universal Joints

CPLP Series Universal Joints

CPLP series precision miniature universal joint couplings feature a long-bore telescopic design. Finished bores have an H7 tolerance for high transmission accuracy, and each joint can rotate through an angle of up to 45°. Made from high-quality 40Cr steel (listed as 42CrMo in the table), the center slider is hardened to 45–50, and the pins are carburized and hardened to 50–55. Choose between plain and needle-roller bearings. Needle-roller bearings support speeds of up to 4,000 rpm, while plain bearings support speeds of up to 1,000 rpm. Surface finishes include black oxide and chrome plating. Supplied with set screws. Suitable for high-precision transmission applications; custom specifications are available.

CPKCP Detachable Fork Telescopic Coupling

CPKCP Detachable Fork Telescopic Coupling

The CPKCP series detachable fork telescopic coupling is made of 42CrMo steel and is available with black oxide, nickel, zinc, or chrome plating. Its simple design allows it to be disassembled and extended, and it offers high transmission efficiency and a wide angular compensation range, accommodating angles of up to 30°. It is suitable for applications where the two shaft axes are at an angle, enabling continuous rotation and reliable torque transmission. The bore is machined to H7/H8 tolerances. Custom keyways, pin holes, hexagonal bores, or square bores are available. Models range from CPKCP-06 to CPKCP-60, with a variety of sizes to suit different shaft diameters and lengths.

CPWG Series Universal Joints

CPWG Series Universal Joints

Single-joint clamp-style coupling made of aluminum alloy with an anodized finish. Lightweight, highly efficient, durable, and stable in performance, it offers excellent wear resistance, minimal backlash, a needle-roller bearing design, speeds of up to 4,000 rpm, and a large angular compensation range. Model: CPWG. Surface finish: anodized. Included accessories: clamping screws. Available in a range of sizes, with outer diameters from 25 mm to 59 mm, lengths from 60 mm to 180 mm, and bore diameters from 5 mm to 35 mm.

CPWX Series Universal Joint

CPWX Series Universal Joint

The CPWX series features double-jointed clamping couplings made of aluminum alloy with an anodized surface finish. Clamping screws are included. These couplings are lightweight, offer high transmission efficiency and a long service life, and provide stable performance, wear resistance, and low backlash. Their needle roller bearing design supports speeds of up to 4,000 rpm and provides a large angular compensation range. The bore diameters at the two ends can be freely combined, from smaller to larger sizes. Bores are machined to standard H7/H8 tolerances, and custom specifications are available for special operating conditions.

SWC-I Universal Joint Coupling

SWC-I Universal Joint Coupling

The SWC-I series universal joint coupling, also known as a cross-type coupling, transmits torque and rotary motion while accommodating a certain angular misalignment between two shafts. Made of 45# steel with a painted finish, it is available in three configurations: Type A, telescopic welded; Type B, non-telescopic welded; and Type C, a short, non-telescopic unit design. Available in orange-red, black, or gray, and supplied with fixing screws. Suitable for light-duty drive applications, it features a compact design, easy installation, and high reliability.

SWC-L Series Universal Joints

SWC-L Series Universal Joints

The SWC-L universal joint coupling is a mechanical component designed to transmit torque and rotary motion, and is suitable for a wide range of industrial drive systems. The series is available in three designs: Type A (telescopic welded type), Type B (non-telescopic welded type), and Type C (short non-telescopic, unitary construction type). Flange diameters range from 225 mm to 390 mm. Standard lengths vary by model and design: 960 mm to 1,570 mm for Type A and 630 mm to 1,090 mm for Type B. Custom lengths are also available. Type A offers an extension (LV) of 140 mm or 200 mm. Type B specifications include shaft diameter (D), flange bolt size, and tightening torque. The products meet welding process standards and offer high strength and reliability.

SWC Integral Yoke Cross-Shaft Universal Coupling

SWC Integral Yoke Cross-Shaft Universal Coupling

The SWC integral-yoke cross-shaft universal coupling is widely used in mechanical power transmission. It transmits torque and rotary motion while accommodating a large angle between two shafts. This series features an integral-yoke cross-shaft design, offering a compact structure, high load capacity, high transmission efficiency, and easy maintenance. It is available in five configurations: Type A, an extendable welded type; Type B, a non-extendable welded type; Type C, a short non-extendable unit type; Type D, a long non-extendable unit type; and Type E, an extendable unit type. These options meet different requirements for axial extension and installation space. The coupling is made of 45 steel and finished with paint, with orange-red, black, and gray available as standard colors. The flange bolt-hole arrangement complies with relevant standards. Users can select the appropriate model and specifications to suit their needs. This series is used in mechanical transmission systems across industries such as metallurgy, mining, shipbuilding, papermaking, and material handling, particularly where large-angle compensation and high-torque transmission are required.

SWC-BH Cross-Shaft Universal Coupling

SWC-BH Cross-Shaft Universal Coupling

This series comprises SWC-BH cross-shaft universal couplings featuring an integral yoke design with no bolted connections, fewer components, and high reliability. Available configurations include BH (standard telescopic welded type), BF (standard telescopic flange type), DH (short telescopic welded flange type), CH (long telescopic welded type), WH (non-telescopic welded type), WF (non-telescopic flange type), and WD (short non-telescopic type). Key specifications: outside diameter 100–620 mm, nominal torque 1.25–400 kN·m, fatigue torque 0.63–200 kN·m, and maximum shaft angle 25°. Typical models include SWC-100 and SWC-120. These couplings transmit torque and compensate for angular misalignment.

W-Type Universal Joint Coupling

W-Type Universal Joint Coupling

This series of W-type universal joint couplings is designed for oil drilling rigs and complies with the SY/T 6497-2000 standard. Models include W40.1×L, W51.5×L, W51.5×L-1, W60.5×L, and W70×L. Rated torque ranges from 8 to 45 kN·m, the maximum shaft angle is 12°, allowable extension is 50 to 100 mm, and the designed minimum length is 680 to 1,200 mm. Key dimensions include D (240–400 mm), D1 (200–360 mm), D2 (160–250 mm H7), and E (20–30 mm). Bolt sizes are M16×1.5 or M20×1.5. Spline specifications are 10×12H7/7×12H7 (or 7×11H7)/11×16H11/d10-205. This series is suitable for high-torque transmission in oil drilling rigs, offering reliability and durability.

SWC-D Short-Type Cross-Shaft Universal Joint Coupling

SWC-D Short-Type Cross-Shaft Universal Joint Coupling

The SWC-D short-type cross-shaft universal joint coupling is widely used in mechanical power transmission to connect shafts whose centerlines are misaligned or whose operating angle varies. This series features a cross-shaft design, with a compact structure, high torque capacity, and a large permissible shaft angle (up to 5°). Key parameters include standard length L, extension length Lv, mass m, rated torque Tn, and fatigue torque Tf. Four flange connection types are available: plain bolt holes, an end-face key, a jaw type, and end-face teeth. Users can choose according to their needs. Models include SWC-D 215, 250, 285, 315, and 350, with flange diameters ranging from 215 to 350 mm and corresponding standard lengths of 415 to 688 mm. The coupling designation format is SWCD [flange diameter] [design type] [minimum length]; for example, SWCD 250 A 495.