Model · CPS
CPS Series Telescopic Miniature Cross-Shaft Universal Coupling
The maximum angle per section is 45°. Connects shafts with a greater separation. The finished bore tolerance is H7; keyways, hexagonal bores, and square bores can also be made on request. Calculation of installation length L and travel X (stroke): travel X≤(Lmax-2L2-B)/2; Lmin≥(Lmax-2L2-L+B)/2; minimum dimension Lmin=L2+B+X+L2. The standard surface treatment is black oxide. Custom non-standard designs and special materials are available to meet the requirements of special operating conditions; please contact customer service for details about custom orders.
- Maximum angle per section
- 45 °
- Finished bore tolerance
- H7
- Material
- 42CrMo
- Surface treatment
- 发黑、镀镍、镀锌、镀铬
- Accessories
- 紧定螺丝
Overview
The maximum angle per section is 45°. Connects shafts with a greater separation. The finished bore tolerance is H7; keyways, hexagonal bores, and square bores can also be made on request. Calculation of installation length L and travel X (stroke): travel X≤(Lmax-2L2-B)/2; Lmin≥(Lmax-2L2-L+B)/2; minimum dimension Lmin=L2+B+X+L2. The standard surface treatment is black oxide. Custom non-standard designs and special materials are available to meet the requirements of special operating conditions; please contact customer service for details about custom orders.
Ordering rules
Model selection example: Follow the selection steps to choose the type and parameters when ordering. Example model: CPSP-22-10×10-140±30. To add a keyway, append K after the bore diameter; append F for a hexagonal bore, S for a square bore, and H for a spline bore. Refer to the specifications for other bore types.

| Model | Type | Material | Surface treatment | Accessories |
|---|---|---|---|---|
| CPS | 短孔伸缩型 | 42CrMo | 发黑、镀镍、镀锌、镀铬 | 紧定螺丝 |
The standard surface treatment is black oxide. Custom non-standard designs and special materials are available to meet the requirements of special operating conditions (please contact customer service for details about custom orders).




Models & specifications
| Model | Nominal torque N.m | d1,d2 (H7) | D | L2 | C | Lmin/Lmax | B | bjs9 | T | W (H8) | F (H8) | Spline |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CPS-03GA | 25 | 10 | 22 | 48 | 12 | Lmin/Lmax determined according to the user's requirements | 30 | 3 | 11.4 | 10 | 10 | 11×14-Z6 |
| CPS-04GA | 45 | 12 | 25 | 56 | 13 | Lmin/Lmax determined according to the user's requirements | 40 | 4 | 13.8 | 12 | 12 | 13×16-Z6 |
| CPS-05GA | 55 | 14 | 28 | 60 | 13 | Lmin/Lmax determined according to the user's requirements | 40 | 5 | 16.3 | 14 | 14 | 13×16-Z6 |
| CPS-1GA | 71 | 16 | 32 | 68 | 16 | Lmin/Lmax determined according to the user's requirements | 40 | 5 | 18.3 | 16 | 16 | 14×17.5-Z5 |
| CPS-2GA | 100 | 18 | 36 | 74 | 17 | Lmin/Lmax determined according to the user's requirements | 40 | 6 | 20.8 | 18 | 18 | 16×20-Z5 |
| CPS-3GA | 150 | 20 | 42 | 82 | 18 | Lmin/Lmax determined according to the user's requirements | 45 | 6 | 22.8 | 20 | 20 | 21×25-Z6 |
| CPS-4GA | 210 | 22 | 45 | 95 | 22 | Lmin/Lmax determined according to the user's requirements | 50 | 6 | 24.8 | 22 | 22 | 21×25-Z6 |
| CPS-5GA | 280 | 25 | 50 | 108 | 26 | Lmin/Lmax determined according to the user's requirements | 50 | 8 | 28.3 | 25 | 25 | 26×32-Z6 |
| CPS-6GA | 550 | 30 | 60 | 122 | 29 | Lmin/Lmax determined according to the user's requirements | 60 | 8 | 33.3 | 30 | 30 | 30×35-Z6 |
| CPS-7GA | 1000 | 35 | 70 | 140 | 35 | Lmin/Lmax determined according to the user's requirements | 70 | 10 | 38.3 | 35 | - | 36×42-Z8 |
| CPS-8GA | 1200 | 40 | 80 | 160 | 40 | Lmin/Lmax determined according to the user's requirements | 80 | 12 | 43.3 | 40 | - | 42×48-Z8 |
| CPS-9GA | 1500 | 50 | 95 | 190 | 50 | Lmin/Lmax determined according to the user's requirements | 90 | 14 | 53.8 | 50 | - | 46×54-Z8 |
| CPS-10GA | 400 | 75 | 120 | 210 | Non-standard design range | |||||||
| CPS-11GA | 630 | 95 | 150 | 260 | Non-standard design range |
Note: The bores at the two ends of the coupling can be freely specified with different diameters, from smaller to larger. Bores are machined to standard H7/H8 tolerances. The bore diameters listed in the table are for reference only. Custom non-standard production is available to meet special user requirements; please contact a sales representative or technical specialist for details.
Specifications
| Parameter | Value | Unit |
|---|---|---|
| Maximum angle per section | 45 | ° |
| Finished bore tolerance | H7 | |
| Material | 42CrMo | |
| Surface treatment | 发黑、镀镍、镀锌、镀铬 | |
| Accessories | 紧定螺丝 |


