Model · CPL
CPL Series Precision Miniature Universal Joint Coupling, Long-Bore Telescopic Type
Product features: Finished bore with H7 tolerance; high transmission accuracy; rotation angle of 45 degrees per joint; made of high-quality 40Cr steel; smooth rotation without binding; center slider hardened to 45-50 degrees, pins carburized and hardened to 50-55 degrees. Two bearing types are available: plain and needle roller. The maximum speed is 400 revolutions per minute for the needle roller bearing type and 1000 revolutions per minute for the plain bearing type.
- Model
- CPL2
- Nominal torque
- 22.4 Nm
- Outside diameter D
- 20
- Bore d
- 12
- Minimum overall length L0min
- 176
- Rotation angle per joint
- 45 度
Overview
Product features: Finished bore with H7 tolerance; high transmission accuracy; rotation angle of 45 degrees per joint; made of high-quality 40Cr steel; smooth rotation without binding; center slider hardened to 45-50 degrees, pins carburized and hardened to 50-55 degrees. Two bearing types are available: plain and needle roller. The maximum speed is 400 revolutions per minute for the needle roller bearing type and 1000 revolutions per minute for the plain bearing type.
Ordering Rules
Ordering example: Refer to the selection table to choose the type and specifications for your order. Note: To add a keyway, append K after the bore diameter; append F for a hexagonal bore, S for a square bore, and H for a keyed bore. For other bore types, refer to the specifications.

| Model and Specifications | Outside diameter D | Overall length L | Bore d1 | Bore d2 | Telescopic travel |
|---|---|---|---|---|---|
| CPL2-20-12×12-176+30 | 20 | 176 | 12 | 12 | 30 |
Ordering example. Note: To add a keyway, append K after the bore diameter; append F for a hexagonal bore, S for a square bore, and H for a keyed bore. For other bore types, refer to the specifications.



Models & specifications
| Model | Nominal torque Nm | D | d | L0min | L | L1 | L2 | S |
|---|---|---|---|---|---|---|---|---|
| CPL2 | 22.4 | 20 | 12 | 176 | 22 | 32 | 112 | 30 |
| CPL3 | 45 | 25 | 14 | 200 | 27 | 40 | 120 | 30 |
| CPL4 | 71 | 32 | 18 | 243 | 30 | 46 | 151 | 35 |
| CPL5 | 140 | 40 | 22 | 287 | 38 | 58 | 171 | 43 |
| CPL6 | 280 | 50 | 28 | 337 | 44 | 69 | 199 | 50 |
| CPL7 | 560 | 60 | 35 | 428 | 60 | 91 | 246 | 65 |
| CPL8 | 1120 | 75 | 42 | 556 | 84 | 122 | 322 | 90 |
Note: The inside diameters at the two ends of the coupling can be freely selected, from smaller to larger. The bores are machined to standard H7/H8 tolerances. Dimensions shown in the table are for reference only. Non-standard products can be custom-made to meet users' specific requirements. Please contact a sales representative or technical specialist for details.
Specifications
| Parameter | Value | Unit |
|---|---|---|
| Model | CPL2 | |
| Nominal torque | 22.4 | Nm |
| Outside diameter D | 20 | |
| Bore d | 12 | |
| Minimum overall length L0min | 176 | |
| Rotation angle per joint | 45 | 度 |
| Material | 40Cr | |
| Center slider hardening | 45-50 | 度 |
| Pin carburizing and hardening | 50-55 | 度 |
| Maximum speed, needle roller bearing type | 400 | 转/分 |
| Maximum speed, plain bearing type | 1000 | 转/分 |

