Model · CPCKP
CPCKP Series Ball-and-Fork Universal Joint Couplings
Designed for two non-parallel shafts, these couplings allow the connected shafts to rotate continuously at an angle to each other while reliably transmitting torque and motion. They provide a wide angle of compensation and can be used at angles of up to 30°. The simple design features detachable joints, telescoping capability, and high transmission efficiency for easy maintenance. Finished bores are H7 and can be machined with keyways, pin holes, hexagonal bores, or square bores as required. Available in 304 stainless steel. The standard surface finish is blackened; nickel plating, zinc plating, chrome plating, and polishing are available on request.
Overview
Designed for two non-parallel shafts, these couplings allow the connected shafts to rotate continuously at an angle to each other while reliably transmitting torque and motion. They provide a wide angle of compensation and can be used at angles of up to 30°. The simple design features detachable joints, telescoping capability, and high transmission efficiency for easy maintenance. Finished bores are H7 and can be machined with keyways, pin holes, hexagonal bores, or square bores as required. Available in 304 stainless steel. The standard surface finish is blackened; nickel plating, zinc plating, chrome plating, and polishing are available on request.
Ordering Rules
Note: To specify a keyway, add K after the bore diameter; add F for a hexagonal bore, S for a square bore, or H for a keyed bore. For other bore configurations, refer to the description.






