Synchronous Belt Pulley

3GT Series Timing Pulleys
High-molybdenum 3GT timing pulley with a 3GT tooth profile, designed for 3GT timing belts. Made of stainless steel, with an optional flange. Available in a range of bore diameters and widths for precision drive applications.

3M Timing Pulley
Tongcheng (Shenma Transmission) 3M timing pulleys are a standard B-type series designed for 3M curvilinear-tooth timing belts with a 3 mm pitch. Pulley specifications include tooth count, tooth outside diameter D0, pitch diameter, tooth-edge outside diameter D0, tooth height H and bore diameter B. Various bore sizes are available. These pulleys are commonly used in compact precision drives, office equipment, packaging machinery and automation systems. Precision-finished tooth surfaces ensure smooth belt engagement, an accurate transmission ratio and low noise. Select the pulley by tooth count and required bore diameter B; customization is available to suit the shaft diameter and installation space.

5M Timing Pulleys
5M timing pulleys serve as driving or driven pulleys in curvilinear-tooth (HTD) timing belt drive systems. With a tooth pitch of 5mm, they are used with 5M timing belts to provide slip-free transmission at a constant ratio. This page covers the B-type standard bore series, featuring a standard round bore with a keyway or set screw hole for general-purpose drive applications. Catalog specifications are grouped by tooth count. Key dimensions include tooth count, outside diameter D, pitch diameter, tooth thickness, and inner groove width (belt groove width). Users can select the tooth count and bore type according to the required drive ratio and shaft diameter. These pulleys are commonly used in packaging machinery, printing equipment, textile machinery, automated conveyor lines, and small motor speed reduction drives. They are typically made of aluminum alloy or medium-carbon steel, with an anodized or black oxide finish. They offer smooth, quiet operation, require no maintenance, and provide a long service life. When selecting a pulley, confirm the tooth count, belt width, and bore size to ensure compatibility with the timing belt and shaft.

8M Timing Pulleys, Type A Finished Bore Series
The 8M Type A finished-bore timing pulley series features a curvilinear tooth profile, an aluminum alloy body and galvanized iron flanges. Each pulley comes with a finished bore and set screws for direct installation. The range includes 17 sizes with 15~60 teeth: tooth outside diameters of 36.83~151.42mm, pitch diameters of 38.20~152.79mm, flange outside diameters of 42~160mm and flange inside diameters of 28~135mm. Total widths are 31/37mm, with groove widths of 27/32mm. Finished bore sizes vary by tooth count and include 10, 12, 14, 15, 16, 17, 18, 19, 20, 22, 24, 25 and 40mm; set screws are M4 or M5. Suitable for power transmission and positioning with 8mm-pitch curvilinear-tooth timing belts in packaging, printing and automated conveyor lines. All specifications listed in the table are in stock, with carton or wooden crate packaging available.

8M Timing Pulleys
8M timing pulleys are metric curvilinear-tooth pulleys with an 8 mm pitch, designed to mesh with 8M timing belts for synchronized power transmission in industrial equipment. This page covers the Type B standard-bore series, which has a standard bore for general-purpose shaft mounting. The catalog lists dimensions by tooth count, including tooth outside diameter D0, tooth inside diameter D0, tooth outside diameter D1, tooth inside diameter D1, and bore diameter D1, making it easier to select a pulley by outside diameter, flange dimensions, and mounting bore. Common applications include factory automation, conveyor lines, and packaging machinery. The same page also includes other series, such as XL, which are not part of this series.

8YU Timing Pulley
8YU high-torque curvilinear-tooth timing pulleys feature a curved tooth profile for high torque transmission and low noise. Available in a range of pulley codes, including BLA, BLH, and BSP, with tooth counts from 20 to over 200 and nominal widths from 16 to 50 mm, as well as other specifications to suit different bore sizes. Ideal for industrial automation drive systems.

AT10 Timing Pulley
AT10 series timing pulleys feature a high-load trapezoidal tooth design, making them suitable for conveyor drive applications. The pulleys are available in aluminum alloy or 5A5C steel, with surface finishes including natural anodizing, black oxide, electroless nickel plating, or no treatment. They use the AT10 tooth profile; the nominal width and other specifications should be selected according to the application. These pulleys are widely used in automation equipment, conveyor lines, and other applications requiring synchronous drive.

AT5/AT10 Trapezoidal-Tooth Timing Pulleys
This series of AT5 and AT10 trapezoidal-tooth timing pulleys is designed for high-load conveying applications. Pulleys are available in aluminum alloy (clear anodized or untreated) or 5A5C steel (black oxide, electroless nickel plating, or untreated), with a range of surface finishes to suit different operating environments. Model numbers consist of the pulley code, number of teeth, tooth profile, nominal width, and other specifications. See the catalog for full details.

AT5 Series Timing Pulleys
AT5 series timing pulleys have a 5 mm pitch and are designed for drives using curvilinear-tooth timing belts. Available in a range of tooth counts and lengths, with 45–109 teeth and corresponding lengths of 225.00–545.00 mm. Available in A and B profiles, they are typically made of aluminum alloy or steel and are widely used in industrial automation drive systems.
MX Series Timing Pulley
The page describes it as an “MX-type high-speed, low-torque pulley.”
HTD5M Series High-Torque Curvilinear-Tooth Timing Pulleys

S3M Series Semicircular-Tooth Synchronous Belt S3M
Additional catalog parameters (refer to the corresponding specification table): H 1.94

S5M Series Rounded-Tooth Timing Belt S5M
Additional catalog specifications (refer to the corresponding specification table): H 3.41

S8M Series Semicircular-Tooth Timing Belt S8M
Semicircular-tooth timing belt. Supplementary catalog specifications (refer to the corresponding specification table): H 5.30

S5M/5M Series Timing Belt Pulleys (Type A Bearing Bore)
The timing pulleys are made of aluminum alloy with machined aluminum alloy flanges. All items listed in the table are in stock. Surface treatment: clear anodized. Shipping packaging: cardboard box or wooden crate.

MXL Timing Belt Pulleys
MXL high-speed, low-torque timing belt pulleys feature ISO-standard tooth dimensions and are suitable for precision drive systems. Available in aluminum alloy (clear anodized or untreated) or 45C steel (black oxide, electroless nickel-plated, or untreated). Pulley codes include BLA, BLH, BSY, BSP, and BSM. Models are specified by parameters such as pulley code, number of teeth, tooth profile, nominal width, pulley shape, and bore specifications. A wide range of tooth counts is available to meet various transmission ratio requirements.

XL Timing Pulley
XL timing pulleys have an imperial tooth profile with a pitch of 1/5 inch (5.08 mm), making them suitable for high-speed, low-torque transmission. Designed to ISO standard tooth dimensions, they are available in a range of materials and finishes: aluminum alloy (clear anodized or untreated) and S45C steel (black oxide, electroless nickel plated, or untreated). Pulley codes indicate the material and finish: BLA (clear-anodized aluminum alloy), BLH (untreated aluminum alloy), BSY (black-oxide S45C), BSP (electroless-nickel-plated S45C), and BSM (untreated S45C). These pulleys are suitable for light-duty drives in applications such as automation equipment and conveyor systems.

L-Type Timing Pulleys
L-type high-speed, low-torque timing pulleys feature ISO-standard tooth dimensions and are suitable for high-speed, low-torque transmission applications. Pulley materials are available in aluminum alloy (clear anodized) or 45C steel (black oxide finish). Standard belt widths include 050 (12.7 mm), 075 (19.1 mm), 100 (25.4 mm), and 150 (38.1 mm). Pulley dimensions (A, W, L, and Lm) vary by width. Bore configurations include H (round bore), P (round bore with tapped hole), and N (new JIS keyway with tapped hole); tapped-hole sizes can also be customized. These pulleys are widely used in automation equipment and conveying machinery, and custom designs are available to meet customer requirements.

H-Type Timing Pulleys
High-speed, low-torque H-type pulleys feature an ISO-standard tooth profile and are compatible with H-type timing belts. Available in aluminum alloy (natural anodized finish) or 45C steel (black oxide or electroless nickel plating). Standard belt widths include 075 (19 mm), 150 (38.1 mm), and 200 (50.8 mm). Pulley codes include BLA, BLH, BSY, and BSM, representing different materials and finishes. Choose from a range of tooth counts, pulley shapes, and bore shapes (H, P, N, etc.) to suit a variety of drive requirements.

Clamping-Type High-Torque Timing Pulleys
This series of clamping-type high-torque timing pulleys is available with three tooth profiles: S3M, S5M, and S8M. Made from aluminum alloy with a natural-color anodized finish, these pulleys offer high torque transmission capacity. They come with set screws and are suitable for precision drive systems. A range of tooth counts (such as 24, 30, and 36) and bore sizes (such as 4 mm, 6 mm, 8 mm, 10 mm, and 12 mm) is available to meet different installation requirements. The series also includes idler pulleys with ISO-standard rack dimensions, suitable for tensioning and guiding timing belt systems.

Timing Pulleys (BLAK/BSYK Series)
This series of timing pulleys is designed for ISO-standard racks. The BLAK designation indicates an aluminum alloy pulley with a natural anodized finish; BSYK indicates a pulley fitted with a 5*5C keyless bushing, also with a natural anodized finish. The tooth profile is T5, with nominal widths including 200 mm. The pulley has an F-type profile. Tooth counts range from 20 to 72, and bore diameters vary by model. These pulleys can be used with keyless bushings; see p. 81.

H Keyless Timing Pulley
The H keyless timing pulley uses a keyless connection and is suitable for a wide range of precision transmission systems. Featuring an ISO-standard tooth profile, it delivers smooth power transmission, high torque capacity, and easy installation. Available in various pulley shapes (E-type to ZZZ-type) and tooth profiles to meet different application requirements.

Taper bushing
A taper bushing is a connecting component that forms a press-fit connection between its outer tapered surface and the inner surface of a pulley or other drive component. Tightening the connecting screws locks the parts together as a single assembly. Standard taper bushings are available in a range of models, with different widths, large-end diameters, and pitch circle diameters, to suit drive connections for shafts of different diameters. Before installation, clean the surfaces and apply lubricant, then tighten the bolts in sequence using a torque wrench. Taper bushings are widely used in mechanical drive systems, providing keyless connections that are easy to install and remove.

High-Torque Synchronous Pulley, S3M Type
The S3M series high-torque synchronous pulleys have a 3 mm pitch and are made of aluminum alloy with a black anodized finish. Their flanged design makes them suitable for high-torque transmission in automation equipment. Available styles include A, B, K, clamping, and keyless types. Tooth counts range from 40 to 333, corresponding to lengths from 120 mm to 999 mm, at a 3 mm pitch. Standard models are designated by length; for example, S3M-120 indicates a length of 120 mm and 40 teeth. This series offers a wide range of specifications and is easy to install, meeting a variety of transmission needs.

SSM Timing Pulley
SSM series timing pulleys are available in a range of outer diameters for synchronous belt drive systems. Models begin with SSM-, followed by a length value in millimeters, with each size corresponding to a different tooth count and outer diameter. Tooth counts range from 36 to 86, and lengths from 180 to 430 mm, typically in 5 or 10 mm increments. The pulleys feature a standard H-type tooth profile and are designed for precision drives in industrial automation.

S8M High-Torque Timing Pulley
S8M-series high-torque timing pulleys have an 8 mm pitch and are designed for high-torque drive applications. Available in several styles: standard (A type), clamping, and keyless. Choose from aluminum alloy or S45C, with surface treatments including black oxide. Pulley tooth counts range from 47 to 113, corresponding to lengths of 376 to 904 mm. Ideal for automation equipment, conveying machinery, and other applications requiring precise synchronous drive.

XL Timing Pulleys
XL trapezoidal-tooth timing pulleys feature a 5.08 mm pitch (standard XL pitch) and are available with 30–80 teeth, corresponding to lengths from 152.40 mm to 406.40 mm. Designed for polyurethane timing belt drives, they are made from high-quality steel or aluminum alloy and offer smooth operation, low noise, and excellent wear resistance. They are widely used in industrial automation, packaging machinery, printing equipment, textile machinery, and other applications. Bore sizes can be customized to meet customer requirements, with keyway and set-screw hole options available.

L-Type Timing Pulley
An L-type timing pulley (A profile) is a mechanical component used in synchronous belt drives. Usually made of aluminum alloy or steel, it features a specific tooth profile and bore size and is suitable for a range of automation equipment.

H-Type Timing Pulley
This H-type timing pulley features a trapezoidal tooth profile and a 12.7 mm pitch, making it suitable for industrial timing belt drive systems. Its B-style hub offers multiple mounting options. Designed for high wear resistance, low noise, and smooth power transmission.

H-Type Timing Pulley, B Profile
The H-type, B-profile timing pulley series is designed for synchronous belt drive systems. It delivers efficient, reliable power transmission and is an ideal choice for factory automation components.

S5M High-Torque Timing Pulley
S5M high-torque timing pulleys have a 5 mm tooth pitch and are designed for high-torque transmission applications. Available in various pulley shapes, including A and F types, they can be made from materials such as aluminum alloy and S45C steel. Black oxide surface treatment is also available. These pulleys are widely used in automation equipment, conveying machinery, and other systems that use timing-belt drives.

High-Torque Timing Pulley, P5M Type
This series of high-torque timing pulleys features a P5M tooth profile (5 mm pitch, curved teeth) and is suitable for high-torque transmission applications. Models range from SL1A to SL337B, covering a variety of tooth counts and available in A and B configurations. Made from high-quality materials to ensure transmission accuracy and durability.

AT10 Timing Belt Pulley
The AT10 timing belt pulley has a 10 mm tooth pitch and is designed for synchronous belt drive systems. It is commonly used in industrial automation, conveyor equipment, and similar applications. This series is available in A-type and B-type designs, with a choice of materials such as aluminum alloy and Grade 45 steel. A range of bore sizes is available, and custom options can be made to order.

High-Torque Timing Belt Pulley, 5GT Type
The 5GT high-torque timing belt pulley is designed for high-torque drive applications. It has a belt width of 9 mm and is available in pulley shapes including Type A. A range of materials and bore specifications is available, along with optional surface treatments. When ordering, select the model, material, pulley, bore specification, and surface treatment in sequence.

SBM Aluminum Timing Pulley, 8YU Type A
The 8YU Type A aluminum timing pulley features a lightweight aluminum alloy construction and is designed for 8YU timing belts. It offers several bore options (H: round bore; P: round bore with tapped hole; N: keyway bore with tapped hole), as well as Y/P end stepped-bore options. A typical model is the SBM 1508YU, with a belt width of 15 mm, hub width A = 16.7 mm, and overall width W = 28.0 mm. It is widely used in drive systems for automation equipment, machine tools, and more.

SLA Series High-Aluminum Timing Pulley, 8YU Type, A Shape
This series of timing pulleys is made from high-aluminum material and features an 8YU tooth profile and an A-shaped design. Suitable for industrial automation drive systems, it is available in various sizes, including 1508YU. The pulleys are lightweight and wear-resistant, and are commonly used in synchronous belt drives.

SLK Series High-Strength Aluminum Timing Pulleys
SLK Series high-strength aluminum timing pulleys are designed for 8YU timing belts. Featuring an A-style profile and lightweight aluminum alloy construction, they are suitable for drive systems in automation equipment. Multiple belt widths and bore options are available, including size 1508YU. Mounting dimensions are compatible with standard timing pulleys.

Clamping-Type High-Torque Timing Pulley S3ML
The S3ML series of clamping-type high-torque timing pulleys is designed for high-torque synchronous drive applications. Its clamping structure ensures a secure connection between the pulley and shaft. The series is available with various tooth counts and widths to meet different drive requirements. For specific parameters such as tooth count, pulley width, and tooth thickness, refer to the product catalog tables.

MXL/XL/S2M/S5M Timing Pulleys
This series of MXL/XL/S2M/S5M timing pulleys features a width-selectable design and supports a range of material and surface finish options. The primary material is aluminum alloy, with finishes including clear anodizing, hard anodizing, and black anodizing. Both the pulleys and flanges are made of aluminum alloy. Select models (SSM, SSP, SSL, and SUS) are available with a black oxide finish. Products are made to order based on parameters selected in steps ①–③, including tooth count, tooth profile, pulley shape, bore type, bore diameter, and bore length. Designed for a wide range of synchronous belt drive systems, they feature standardized tooth profiles and mounting dimensions.

L-Type Keyless Timing Pulley
The L-type keyless timing pulley is designed for use with a standard keyless bushing to provide a keyless connection for high-precision synchronous drives. It features an E-shaped pulley profile and L-type teeth, and is available with various tooth counts and belt widths. It is commonly used in automation equipment, industrial machinery, and other applications requiring reliable synchronous transmission. Its keyless design makes installation easy, eliminates machining errors from keyways, and improves drive accuracy and service life.

L-Type Keyless Timing Pulley
L-type keyless timing pulley with a standard keyless bushing. The bore can be specified or selected in 1 mm increments. The pulley has an E-shaped profile. Suitable for timing belt drives requiring a keyless connection. Available in a range of tooth counts (14–58); P.D. and O.D. vary with the tooth count.

Keyless H-Type Timing Pulley
The keyless H-type timing pulley is a trapezoidal-tooth pulley with a keyless connection. It features an H-type tooth profile (12.7 mm pitch) and is suitable for medium-power drives. Available in several pulley shapes, including E type, it comes with 14–64 teeth and supports belt widths of 8 mm, 10 mm, 12 mm, 14 mm, and more. Shaft bores (dH7) are available in sizes from 8 to 14 mm, with shoulders and B-type bushings. It is typically made of steel or aluminum alloy and is used in industrial automation, packaging machinery, conveying equipment, and other applications.

SLB Series Timing Pulleys
SLB Series timing pulleys are designed for H-pitch metric timing belts. The table lists models with different pulley profiles, including SLB①-075H, SLB①-10H, and SLB①-20H. Key dimensions include pitch diameter (P.D.), outside diameter (O.D.), and width (F). Featuring an H-profile tooth design, this series is widely used in automation equipment and mechanical power transmission.

SSL Series Timing Pulleys
SSL series timing pulleys are available in specifications such as ①-075H, ①-10H, and ①-20H, making them suitable for different pitches and tooth profiles. The pulleys come in a variety of shapes, with optional shoulder widths, for use in precision drive systems.

SUS Series Timing Pulleys
SUS Series timing pulleys are available in various sizes and models, including SUS①-075H, SUS①-10H, and SUS①-20H. The pulleys have a shoulder and are designed for timing belt drive systems. Specific dimensions (P.D., O.D., and F) depend on the model. This series is a standard pulley option for factory automation components.

Keyless Timing Pulley, H Type
This H-type keyless timing pulley uses a standard keyless bushing and is designed for H-type timing belts. Product specifications include the number of teeth, belt width, pulley shape, outer diameter, bore diameter, thickness, width, and height to meet a range of power transmission needs. The specific model and size can be selected based on the combination of tooth count and width.

Keyless High-Torque Timing Pulley, P8M Type
The keyless high-torque P8M timing pulley is a high-performance pulley featuring a keyless connection for high torque transmission. With an 8 mm pitch, it is compatible with P8M timing belts. A range of tooth counts and belt widths is available to meet different drive requirements. These pulleys are widely used in automation equipment, machine tools, packaging machinery, and other applications. Their compact design makes installation easy while effectively reducing vibration and noise and improving transmission efficiency.

KK Series Timing Pulleys
The page content is incomplete and contains only header information, so specific parameters are unavailable.