Taper Bushes and Keyless Bushings

Taper-Lock Bushes and Keyless Bushings

Taper-Lock Bushes and Keyless Bushings

Taper-lock bushes and keyless bushings are friction-based shaft connection devices. Keyless bushings convert bolt-tightening force into pressure on the inner surface through a tapered interface, securely connecting a shaft to a hub without the need for keyway machining. They are suitable for applications involving frequent forward and reverse rotation and are less prone to developing play. Taper-lock bushes are pressed into the inner surface of a pulley or similar component via their outer taper, then secured through threaded holes to form an integrated assembly. Installation is simple, and the assembly can be easily removed using only bolts. Standard taper-lock bush sizes include 1008, 1108, 1210, and others, with a range of size options available.

Keyless Bushing (ST Bushing)

Keyless Bushing (ST Bushing)

The keyless bushing (ST bushing) is a keyless connection element that secures a shaft to a hub by clamping tapered surfaces together. It offers high torque transmission capacity and axial positioning. The operating temperature range is -20°C to +80°C. The body is made of S45C steel with a black-oxide finish, and the bolts are made of SCM435 steel with a black-oxide finish. Standard E-type ST bushings are available in a range of bore diameters, d, from 8 mm to 71 mm and larger. They feature bolts in various sizes and threaded removal holes. Allowable maximum torque ranges from 16 N·m to over 171 N·m, and the allowable axial load is up to 8.74 kN. They are suitable for drive systems requiring precise alignment and quick installation.

Keyless Locking Bushings (MSM/MSMB Series)

Keyless Locking Bushings (MSM/MSMB Series)

The MSM/MSMB Series keyless locking bushings are keyless connection elements with a centering function. They are made of S45C with a black oxide finish, and use SCM435 bolts. They are suitable for temperatures from -20°C to +80°C. Bolts secure the bushing to create a keyless connection between the shaft and hub and transmit torque. The design is easy to install and provides reliable centering. The series includes two models, MSM and MSMB, with a range of bore diameters from 5 mm to 70 mm to accommodate different shaft sizes. These bushings are widely used in automation equipment, mechanical power transmission, and other applications.

Taper Bush

Taper Bush

A taper bush is a basic power transmission component used to create a keyless friction connection between a shaft and a hub. Tightening high-strength bolts presses the tapered surfaces together, transferring torque and axial force through contact pressure and friction. It eliminates the weakening of the shaft and hub caused by keyways, is easy to install and remove, offers good interchangeability, and can be used in multiple units in series. This series covers 20 sizes from Bush No 1008 to 5050, with maximum outside diameter A of 35~177.5mm, bush length B of approximately 22.3~127mm, and matching wrench sizes 3~14 with corresponding tightening torques. The model number is the standard Bush No: the first two digits indicate the maximum bore size (inches×10), and the last two indicate the bush length (inches×10). For example, 1008 has a 1.0-inch bore and is 0.8 inches long, while 2012 has a 2.0-inch bore and is 1.2 inches long. The same page also describes locking assemblies: they release their grip under overload to protect equipment and are suitable for mechanical connections under heavy loads.