V-belt

XPC Series Narrow V-Belts, XPC Series

Example of model designation: XPC 2000; the diagram labels XPC as the model and 2000 as the datum length.

XPA Series Narrow V-Belts

Agricultural Machinery Wrapped V-Belt Series

Agricultural Machinery Wrapped V-Belt Series

The agricultural machinery wrapped V-belt series includes single and joined wrapped belts. They are suitable for agricultural machinery such as high-horsepower, high-throughput rice, corn, and wheat harvesters, as well as mining and construction machinery. The belts feature dual-layer, wide-angle flexible wrapping, high-strength aramid cords, fiber-reinforced base rubber, and a specialized structural design. They offer wear, oil, and aging resistance, handle heavy loads, resist slippage, and provide a long service life. Single wrapped belt models include HB, HC, SB, SC, HI, HK, and HM, with top widths of 17–50.8 mm, heights of 9–22.2 mm, angles of 30° or 40°, and lengths of 1,140–6,000 mm. The joined wrapped belt is model 9J-5, with an overall width of 50.5 mm, overall height of 9.7 mm, belt spacing of 10.3 mm, individual belt top width of 9.7 mm, individual belt height of 7.9 mm, and an angle of 40°.

Agricultural Machinery Wrapped-Band Joined V-Belt Series

Agricultural Machinery Wrapped-Band Joined V-Belt Series

The agricultural machinery wrapped-band joined V-belt series is suitable for high-horsepower, high-throughput rice, corn, and wheat harvesters, as well as mining and construction machinery. The series features a double-layer, wide-angle flexible fabric wrap to improve belt wear resistance and flexibility. High-strength aramid cords ensure low elongation and excellent adhesion, while fiber-reinforced base rubber provides high load capacity and helps prevent belt breakage. A special structural design gives the belt high rigidity, resistance to heavy loads, and excellent anti-slip performance. An optimized compound reduces heat buildup, withstands high and low temperatures, resists fatigue, and extends service life. Joined belts run smoothly and, compared with sets of individual belts, provide better overall transmission performance with less risk of rolling over, vibration, or coming off. The main model is 9J-5, with an overall width of 50.5 mm, overall height of 9.7 mm, pitch of 10.3 mm, single-belt top width of 9.7 mm, single-belt height of 7.9 mm, and an angle of 40°.

Agricultural Machinery Raw-Edge Belt Series

Agricultural Machinery Raw-Edge Belt Series

The agricultural machinery raw-edge belt series is suitable for high-horsepower, high-capacity rice, corn, and wheat harvesters and other agricultural machinery, as well as mining machinery and industrial equipment such as automotive engine drives, air compressors, compressors, and electric motors. The belts feature flexible wide-angle fabric, a high-modulus polyester or aramid cord tensile member, and a fiber-reinforced body. They offer high load capacity, low elongation, slip resistance, excellent wear resistance, low heat generation, and resistance to flex fatigue. Belt speeds can reach 50 m/s. The operating temperature range is -30°C to 100°C for CR and -40°C to 120°C for EPDM. Available cross-section profiles include HB, HC, HD, SB, SC, XPB, XPC, HI, HK, HM, HN, and HO, with angles of 40° or 30° and length ranges of 1,100–4,500 mm or 2,000–4,500 mm.

Agricultural Machinery Joined Raw-Edge Belt Series

Agricultural Machinery Joined Raw-Edge Belt Series

This series of joined raw-edge belts for agricultural machinery is suitable for high-horsepower, high-throughput rice, corn, and wheat harvesters, as well as other agricultural equipment and industrial machinery such as mining equipment, automotive engine drives, air compressors, compressors, and electric motors. Flexible wide-angle fabric is used on the top to improve reverse-bending flexibility. The tensile cord reinforcement uses high-modulus polyester or aramid cords, providing high load capacity, low elongation, and excellent resistance to slippage. The fiber-reinforced body is rigid, dimensionally stable, and highly wear-resistant. An optimized tooth profile minimizes heat generation during operation and resists flex fatigue for a long service life and reduced maintenance. Belt speeds of up to 50 m/s are supported. CR material is suitable for temperatures from -30°C to 100°C, while EPDM is suitable for -40°C to 120°C. The belt runs smoothly; compared with multiple individually matched belts, the joined belt provides more effective overall power transmission and is less prone to rollover, vibration, or coming off. Available specifications include the 9J-5 joined belt, with an overall width of 50.5 mm, overall height of 9.7 mm, pitch of 10.3 mm, individual belt top width of 9.7 mm, individual belt height of 9.7 mm, and an angle of 40°.

ZX/AX/BX/CX Series Industrial Raw-Edge Belts

ZX/AX/BX/CX Series Industrial Raw-Edge Belts

ZX/AX/BX/CX series industrial raw-edge belts are widely used in industrial equipment such as air compressors, fans, garden machinery, textile machinery, and CNC machine tools. Made with rubber-impregnated flexible cotton canvas, high-modulus, low-shrinkage polyester cords, and a fiber-reinforced composite compression layer, they offer resistance to high and low temperatures (-40°C to 120°C), wear, and oil, as well as high transmission efficiency. The molded teeth on the underside reduce heat buildup during operation, while the wear-resistant edge-forming process helps prevent slippage and wear. These belts provide high tensile strength, excellent flexibility, high load capacity, and low elongation. Available cross-sections include ZX (top width 9.7 mm, thickness 8.0 mm, angle 40°), AX (12.7 mm, 9.0 mm, 40°), BX (16.3 mm, 11.0 mm, 40°), and CX (21.5 mm, 13.0 mm, 40°). The ZX series is available in a range of lengths from ZX20 to ZX120, with reference lengths from 520 mm to 2,910 mm.

BX Series Industrial Raw-Edge Belts

BX Series Industrial Raw-Edge Belts

The BX series industrial raw-edge belts are available in a range of cross-sections, from BX23 to BX73. Each size is listed with its imperial designation, inner circumference Li (mm), datum length Ld (mm), and corresponding AV17 size. The inner circumference ranges from 560 mm to 1,855 mm (based on the first table), making these belts suitable for industrial drive systems. Their standardized dimensions and performance meet a variety of drive requirements.

AX Series Industrial Raw-Edge Belts

AX Series Industrial Raw-Edge Belts

AX Series industrial raw-edge belts are V-belts designed for power transmission. They offer wear resistance, oil resistance, and high tensile strength, making them suitable for the drive systems of a wide range of industrial equipment, including fans, pumps, and compressors. The series includes two main sizes, AX20 and AX25. Belt lengths are identified by numeric codes, while suffixes such as AV13X635Li indicate the cross-section and reference length. Made from high-quality rubber and fiber materials, these belts transmit power efficiently and help reduce vibration.

CX Series Industrial Cut-Edge Belts

CX Series Industrial Cut-Edge Belts

CX Series industrial cut-edge belts are suitable for a wide range of industrial drive applications. The series offers sizes from CX25 to CX125, with inner circumferences of 760–2560 mm and reference lengths of 816–2561 mm. Each size corresponds to an AV22 model for easy replacement and compatibility. Made from high-quality rubber with reinforced cords, these belts are wear-resistant, heat-resistant, and have low elongation, ensuring efficient power transmission and a long service life.

XPZ/XPA/XPB/XPC Series Narrow V-Belts

XPZ/XPA/XPB/XPC Series Narrow V-Belts

The XPZ/XPA/XPB/XPC series narrow V-belts are high-efficiency drive belts designed for industrial applications requiring compact installation and high load capacity, such as diesel and gasoline engines, agricultural machinery, air compressors, fans, lathes, drilling machines, and mining equipment. They offer higher transmission efficiency than conventional wrapped belts and raw-edge belts. Their construction consists of rubber-impregnated flexible wide-angle fabric, high-modulus, low-shrinkage polyester cords, and a fiber-reinforced composite compression layer. Features: heat resistance from -40°C to 120°C; molded cogs on the underside reduce heat buildup during operation and make the belts suitable for small pulleys; special raw-edge shaping helps prevent slippage and wear; high-modulus, low-shrinkage cords reduce elongation; and the fiber-reinforced compression layer delivers greater power transmission. Cross-sectional dimensions: XPZ—top width 9.7 mm, thickness 9.0 mm; XPA—top width 12.7 mm, thickness 10.5 mm; XPB—top width 16.3 mm, thickness 13.5 mm; XPC—top width 21.5 mm, thickness 17.5 mm. All have a 40° angle. Add the reference length (mm) after the model designation to specify the belt, for example, XPZ 630.

Narrow V-Belt XPB/5VX Series

Narrow V-Belt XPB/5VX Series

The XPB/5VX Series narrow V-belt is a high-efficiency drive belt featuring an XPB cross-section. It is available in a range of sizes with datum lengths (Ld) from 1,130 mm to 2,990 mm. Suitable for a wide variety of industrial drive equipment, including motors, pumps, and compressors, these belts are wear-resistant, stretch-resistant, and provide smooth power transmission. They comply with international standards.

TPU V-Belt Series

TPU V-Belt Series

The TPU V-belt series is made from high-quality thermoplastic polyurethane and offers excellent flex fatigue and abrasion resistance, as well as easy splicing. Available in A, B, C, D, M, and Z profiles, the belts range from 8 mm to 32 mm wide and 4 mm to 20 mm high, with a 3.5 mm pattern height (the M profile is smooth). Nylon or steel tensile cords can be added for reinforcement. The operating temperature range is -35°C to 80°C, and hardness ranges from Shore A 80 to 98. These belts are widely used in the textile, packaging, printing, machinery, electronics, glass, chemical, and ceramic industries, and perform especially well on conveyor lines such as glazing and polishing lines in the ceramics industry. They are easy to splice by heat welding and convenient to install and maintain.