Model · Agricultural Machinery Joined Raw-Edge Belt Series

Agricultural Machinery Joined Raw-Edge Belt Series

This series of joined raw-edge belts for agricultural machinery is suitable for high-horsepower, high-throughput rice, corn, and wheat harvesters, as well as other agricultural equipment and industrial machinery such as mining equipment, automotive engine drives, air compressors, compressors, and electric motors. Flexible wide-angle fabric is used on the top to improve reverse-bending flexibility. The tensile cord reinforcement uses high-modulus polyester or aramid cords, providing high load capacity, low elongation, and excellent resistance to slippage. The fiber-reinforced body is rigid, dimensionally stable, and highly wear-resistant. An optimized tooth profile minimizes heat generation during operation and resists flex fatigue for a long service life and reduced maintenance. Belt speeds of up to 50 m/s are supported. CR material is suitable for temperatures from -30°C to 100°C, while EPDM is suitable for -40°C to 120°C. The belt runs smoothly; compared with multiple individually matched belts, the joined belt provides more effective overall power transmission and is less prone to rollover, vibration, or coming off. Available specifications include the 9J-5 joined belt, with an overall width of 50.5 mm, overall height of 9.7 mm, pitch of 10.3 mm, individual belt top width of 9.7 mm, individual belt height of 9.7 mm, and an angle of 40°.

Overview

This series of joined raw-edge belts for agricultural machinery is suitable for high-horsepower, high-throughput rice, corn, and wheat harvesters, as well as other agricultural equipment and industrial machinery such as mining equipment, automotive engine drives, air compressors, compressors, and electric motors. Flexible wide-angle fabric is used on the top to improve reverse-bending flexibility. The tensile cord reinforcement uses high-modulus polyester or aramid cords, providing high load capacity, low elongation, and excellent resistance to slippage. The fiber-reinforced body is rigid, dimensionally stable, and highly wear-resistant. An optimized tooth profile minimizes heat generation during operation and resists flex fatigue for a long service life and reduced maintenance. Belt speeds of up to 50 m/s are supported. CR material is suitable for temperatures from -30°C to 100°C, while EPDM is suitable for -40°C to 120°C. The belt runs smoothly; compared with multiple individually matched belts, the joined belt provides more effective overall power transmission and is less prone to rollover, vibration, or coming off. Available specifications include the 9J-5 joined belt, with an overall width of 50.5 mm, overall height of 9.7 mm, pitch of 10.3 mm, individual belt top width of 9.7 mm, individual belt height of 9.7 mm, and an angle of 40°.

Product category: Power transmission components / V-belts / raw-edge belts

Models & specifications

Model / NameAngle degPitch (mm)Single height (mm)Single top width (mm)Total height (mm)Total width (mm)
9J-5 9J joined raw-edge belt, 5-belt set4010.39.79.79.750.5

Original catalogs

Agricultural Machinery Joined Raw-Edge Belt Series — Catalog page
Agricultural Machinery Joined Raw-Edge Belt Series — Catalog page