Sprockets and Chains

06B Shenma Finished Bore Sprocket
The 06B (3/8-inch) Shenma finished bore sprocket is machined from 45# round steel, with induction-hardened teeth and a blackened surface for high wear resistance and strength. It is suitable for use with standard 06B roller chains. Available with 10 to 20 teeth, the sprockets have pitch diameters of 30.8-60.8mm, outside diameters of 34-64mm, hub diameters of 20-43mm, overall lengths of 22-24mm, and weights of 0.08-0.32kg. Finished bore options include 10, 12, 14, 15, 16, 17, 18, 20, and 25mm to suit different shaft diameters. All models listed in the table are in stock and available for same-day shipping. Packaging options include cartons, wooden crates, and pallets.

06B Series Shenma Standard Sprocket
The 06B series (3/8-inch) Shenma standard sprocket is designed for single-strand 06B roller chain with a 9.525mm pitch. It is made entirely of forged A3 steel, with induction-hardened teeth for high surface hardness and wear resistance. It is suitable for low- to medium-speed drives in general machinery, conveyor lines, packaging machinery and agricultural machinery. The primary specification is tooth count, with 55 options from 9T~72T. As the tooth count increases, the outside diameter Do ranges from 30.0mm to 221.0mm and the hub diameter BD from 19mm to 85mm. Total thickness B ranges from 18~25mm, and bore diameter d is available in six sizes: 8, 10, 12, 14, 16 and 20mm. Individual weights range from 0.05kg to 2.44kg. Select the model by the required tooth count (transmission ratio/linear speed), then check the bore diameter against the shaft diameter. The bore can be enlarged or a keyway machined if necessary. All specifications listed in the table are in stock and available for same-day shipping, packed in cartons, wooden crates or on pallets.

Shenma 06B 3/8-inch Duplex Standard Sprocket Series
The Shenma 06B (3/8-inch) duplex standard sprocket fits 06B-2 duplex roller chain with a 9.525mm pitch. Made from forged A3 steel, it has induction-hardened teeth for good surface hardness and wear resistance, making it suitable for low- to medium-speed drives. The range covers 10~50 teeth, with outside diameters of 34.0~154.0mm, hub diameters of 20~80mm, overall thicknesses of 24/28/35mm, a tooth width of 15.4mm, bore diameters of 8~16mm, and unit weights of 0.07~2.65kg. All sizes are in stock and can ship as early as the same day. Packaging options include cartons, wooden cases, and pallets. These sprockets are widely used in conveyors, packaging machinery, agricultural machinery, and general industrial drives.

08B Shenma Finished Bore Sprocket
The 08B (4 fen) Shenma finished bore sprocket has a 12.7mm pitch, 8.51mm roller diameter, 7.95mm inner width and 7.2mm tooth width. It fits 08B single-strand roller chain. Available with 9T~40T teeth, it has an outer diameter of 41~166.5mm, pitch diameter of 37.13~161.87mm, hub diameter of 24~62mm, overall length of 22~28mm and unit weight of 0.11~1.9kg. The sprocket is machined from 45# round steel (45# steel), with induction-hardened teeth and a black oxide finish for rust protection. Depending on the tooth count, finished bore (hub bore) options include 10, 12, 14, 15, 16, 17, 18, 19, 20, 22, 25, 28, 30, 35, 38, 40, 42 and 45mm. Large and small hubs can be selected separately. Depending on the bore size, 4×1.8 or 5×2.3 keyways and M4 set screw holes are also available. All specifications listed in the table are in stock and available for same-day dispatch. Packaging options include cartons, wooden crates and pallets.

08B Series Double-Row Sprockets
The 08B double-row sprocket, also known as a 4-fen double-row sprocket, is a standard Shenma sprocket made from forged A3 steel. Its teeth are induction hardened for good wear resistance and load capacity. It is suitable for 08B double-row roller chain drives. The catalog lists standard sizes from 10 to 60 teeth, with dimensions including outside diameter Do, boss diameter BD, total thickness C and bore diameter d. All models listed in the series are in stock and available for same-day shipping. Packaging options include cartons, wooden cases and pallets.

08B 45# Steel Standard Double-Single Sprocket
The Shenma 08B (4-fen) standard double-single sprocket is machined from 45# steel round bar, with induction-hardened teeth, for drive applications using 08B chain. The catalog lists standard sizes with 11–28 teeth, outside diameters of 50–118mm, hub diameters of 29–97mm, a total thickness of 30mm, an extended version thickness of 35mm, row spacing of 23mm, extended version row spacing of 28mm, bore diameters of 10–18mm, and an approximate unit weight of 0.30–2.21kg. All models listed in the table are in stock and available for same-day shipping. Packaging options include cartons, wooden crates, or pallets.

10A/12A Shenma Finished-Bore Sprockets
Shenma finished-bore sprockets (10A/50B, 12A/60B) are suitable for 5-fen (10A) and 6-fen (12A) roller chain drives. Made from 45# steel, they have induction-hardened teeth and a blackened finish for good wear resistance and fatigue strength. The 10A/50B chain has pitch P=15.875mm, W=9.53mm, DR=10.16mm and T=8.7mm. Sprockets have 10~35 teeth, an outer diameter of 57.5~184mm, a pitch diameter of 51.37~177.10mm, a hub diameter of 35~75mm, an overall length of 24~31mm, a unit weight of 0.27~2.2kg, a finished bore of 10~45mm, a chain groove width of 4.1mm and an M4 screw hole. The 12A/60B chain has pitch P=19.05mm, W=12.7mm, DR=11.91mm and T=11.7mm. Sprockets have 9~30 teeth, an outer diameter of 64~190mm, a pitch diameter of 55.70~182.25mm, a hub diameter of 36~75mm, an overall length of 27~36mm, a unit weight of 0.41~3.5kg and a finished bore of 1

10A Series (5/8-inch) Shenma Standard Sprocket
The 10A series (5/8-inch) Shenma standard sprocket is designed for roller chain drives and fits 10A (5/8-inch) chains. The catalog lists the outside diameter D0, hub diameter BD, overall thickness BL, bore diameter d, and weight for sprockets with 9~76 teeth, making it easy to select a model based on the transmission ratio and available installation space. The sprocket has a one-piece construction with a hub and is suitable for general industrial drives, conveying equipment, agricultural machinery, and similar applications. Confirm the required dimensions based on the chain specification, tooth count, shaft diameter, and load.

10A Double-Row Sprocket (5/8 inch)
The 10A (5/8 inch) standard double-row sprocket is compatible with ISO 10A / ANSI 50 double-row roller chains (15.875mm pitch). Made from forged A3 steel, it has induction-hardened teeth for high surface hardness and wear resistance. It is suitable for low- to medium-speed drives in general machinery, conveyor lines, packaging equipment and food machinery. The catalog includes 37 sizes with 10~46 teeth: tooth outside diameter 58.0~238.0mm, hub diameter 30~100mm, overall thickness BL 39.00~50.00mm, total tooth thickness C 26.0mm, bore diameter 10~25mm, and unit weight 0.31~14.88kg. All sizes are in stock and available for same-day dispatch, packaged in cartons, wooden cases or on pallets. Select a size based on chain number 10A-2 and the required tooth count. As the tooth count increases, the outside diameter, weight and torque capacity increase accordingly, while the transmission ratio decreases.

10A Series 5/8-Inch Single-Strand Standard Sprocket, 45# Steel
The 10A series 5/8-inch single-strand standard sprocket is made of 45# steel and fits ANSI 10A single-strand roller chain with a 15.875mm pitch. It is available in 40 sizes with 10~50 teeth. The teeth are induction hardened for good surface hardness and wear resistance, making the sprocket suitable for low- to medium-speed drives in general machinery, conveyor lines, packaging equipment and other applications. For each tooth count, the catalog lists the outside diameter Do (57.5~259mm), hub diameter BD (40~100mm), overall thickness BL (28~40mm), bore diameter d (10~20mm) and weight (0.27~6.72kg). Select a sprocket by tooth count and bore size; the bore can be further machined with a keyway or modified as needed. All sizes listed in the table are in stock and available for same-day dispatch, packed in cartons, wooden cases or on pallets.

10A 45# Steel Standard Double-Single Sprocket
The Shenma 10A (5/8-inch) standard double-single sprocket is machined from 45# round steel, with induction-hardened teeth for high surface hardness, wear resistance and durability. It is suitable for 10A double-row roller chain drives with a 15.875mm pitch. Sizes range from 11~30 teeth, with outside diameters of 63~158mm, hub diameters of 35~130mm, a standard overall thickness of 35mm (40mm for the extended version), row spacing of 27mm (32mm for the extended version), bore diameters of 12~20mm and unit weights of 0.51~4.82kg. The full range is regularly stocked and available for same-day dispatch, with carton, wooden crate or pallet packaging.

12A Shenma Finished Bore Sprocket
The 12A (6 fen) Shenma finished bore sprocket is a single-strand, standard-bore plate sprocket compatible with 12A/60B roller chains (chain pitch P=19.05mm, inner plate width W=12.7mm, roller diameter DR=11.91mm, and chain plate thickness T=11.7mm). Made from 45# steel, it has high-frequency hardened teeth for a hard, wear-resistant tooth surface and a black oxide finish for rust protection. Finished (pre-machined) bore sizes are available in 18 options: 10, 12, 14, 15, 16, 17, 18, 20, 22, 25, 28, 30, 32, 35, 38, 40, 42, and 45mm. The bore can be enlarged as needed or fitted directly. Corresponding keyway B sizes are 4×1.8 (bore diameters 10, 12) and 5×2.3 (bore diameter 14), with threaded holes M of M4 and M5, respectively. Tooth counts range from 9~30, outside diameter Do from 64mm to 190mm, pitch diameter D1 from 55.70mm to 182.25mm, and hub diameter BD from 36~75mm (larger tooth counts have dual hubs of 56/67, 57/67, 64/67, etc.); overall length

12A Series (6-fen) Shenma Standard Sprockets
The 12A series (6-fen) Shenma standard sprockets are designed for 12A/60B roller chains. They have a 19.05mm pitch, an 11.91mm roller diameter, and a 12.7mm inner plate width. The catalog provides a complete dimension table by tooth count, covering 9–60 teeth, as well as 65, 70, 75, and 80 teeth. Parameters for each tooth count include outside diameter, hub diameter, overall thickness, bore diameter, and weight, making it easy to select a sprocket based on transmission ratio and installation space. Standard sprockets are commonly used in chain drives for motor and gearbox outputs, conveyor lines, packaging machinery, and agricultural machinery, and can be paired with chains of the same pitch and suitable shaft ends. Most overall thicknesses in the table range from 27–30mm, while bore diameters vary with tooth count from approximately 12–16mm.

12A Standard Double-Row Sprocket
The 12A standard double-row sprocket, commonly known as a 6-fen double-row sprocket, has a 19.05mm pitch and is compatible with 12A double-row roller chain drives. It is available in 37 sizes with 10~46 teeth: outside diameter 70.0~372.0mm, boss diameter 40~110mm, overall thickness 45.00~60.00mm, total tooth thickness 34.0mm across all sizes, bore diameter 12~25mm, and unit weight 0.58~27.2kg. The sprocket body is made from forged A3 steel, and the teeth are induction hardened for wear and impact resistance. It is suitable for medium- and low-speed, heavy-duty drives in conveyor lines, agricultural machinery, packaging equipment, and general industrial equipment. All sizes are in stock and available for same-day dispatch, with packaging in cartons, wooden cases, or on pallets. Select the appropriate size based on the chain specification (12A double-row), required tooth count, and equipment shaft diameter (bore d). Higher tooth counts provide smoother operation but increase the outside diameter and weight.

12A Double-Row Standard 45# Steel Sprocket
The Shenma 12A (6 fen) double-row standard 45# steel sprocket is designed for 12A double-row roller chain with a 19.05 mm pitch. It is suitable for applications requiring double-row chain drives, higher torque transmission or a higher safety factor. The sprocket body is turned from 45# round steel, and the teeth are induction hardened for high surface hardness and wear resistance, extending their service life with the chain. The catalog lists 27 common sizes from 10 to 36 teeth, along with outside diameter Do (70~251 mm), hub diameter BD (42~110 mm), overall thickness BL (52~60 mm), total tooth width C (34.1 mm), bore diameter d (12~25 mm) and unit weight (0.68~12.77 kg), making selection and drive calculations easier. The full range is regularly stocked and available for same-day dispatch. The bore can be further machined as needed, including enlargement and keyway cutting. Packaging options include cartons, wooden cases or pallets.

Shenma 16A Series (1-inch) Standard Sprockets
Shenma 16A series (1-inch) standard sprockets are single-strand sprockets with an integral hub, designed for roller chains with a 1-inch pitch (25.4mm, corresponding to the ANSI 80 series). They are widely used in conveyor lines, packaging machinery, agricultural machinery, and general power transmission systems. The catalog lists 47 common tooth counts from 9T to 65T, with tooth count as the sole specification variable. For each size, it provides the outside diameter Do (85.0~536.0mm), hub diameter BD (48~110mm), overall thickness BL (31.0~45.0mm), bore diameter d (14/16/18/20/25mm), and unit weight (0.58~17.80kg). Sprockets with fewer teeth have smaller bores and thinner bodies, while those with more teeth have thicker bodies and larger hubs for rigidity. Select the tooth count based on the transmission ratio, center distance, and chain speed, then choose a bore to match the shaft diameter or machine a keyway as needed.

16A Standard Duplex Sprocket
The 16A standard duplex sprocket, commonly known as an 8-fen duplex sprocket, is designed for 16A duplex roller chain drives with a 25.4mm pitch. It is machined in one piece from forged A3 steel, with induction-hardened teeth for high surface hardness and wear resistance. It maintains consistent meshing accuracy and service life under medium to heavy loads and continuous operation. Standard sizes range from 10T to 50T, with outside diameter Do from 94.0mm to 416.0mm, boss diameter BD from 52~120mm, overall thickness BL from 65~73mm, and total tooth thickness C of 43.0mm throughout. Standard bore diameters d are 16mm and 20mm; lower tooth-count sizes are also available with a 16mm bore. Unit weight ranges from 1.50~37.40kg. The entire range is normally stocked for same-day dispatch and is packed in cartons, wooden cases or on pallets. These sprockets are suitable for conveyors, packaging machinery, agricultural machinery and general industrial drive shafts. The same page also lists specifications for 6-fen (12A) duplex sprockets for comparison only; they are not part of this series.

Shenma 2052 Series Double-Pitch Sprockets
Shenma 2052 series double-pitch sprockets fit 2052/210AL double-pitch roller chains (chain pitch 31.75mm, inner chain width 9.4mm, roller diameter 19.05mm, tooth width 8mm). Available with 8~20 teeth, an outside diameter of 97~217mm, hub diameter of 53~80mm, overall thickness of 35mm, bore diameter of 16~20mm, and unit weight of 0.70~3.31kg. Made of forged A3 steel, the sprockets have induction-hardened teeth for wear resistance and high load capacity. They are suitable for double-pitch chain drives in conveyor lines, packaging machinery, agricultural machinery, and other applications. All models listed in the table are in stock and available for same-day shipment, with carton, wooden case, or pallet packaging.

Shenma 2062 Series Double-Pitch Sprockets
Shenma 2062 series double-pitch sprockets fit 2062/212AL double-pitch roller chains. Chain pitch is 38.1mm, chain inner width is 12.57mm, roller diameter is 22.23mm, and tooth width is 11mm. Available in 26 tooth counts from 8~33 teeth, with outside diameters of 113.0~443.0mm, hub diameters of 70~90mm, an overall thickness of 40mm, bore diameters of 18~30mm, and a weight of approximately 1.50~14.12kg per piece. The sprockets are made from forged A3 steel with induction-hardened teeth and are suitable for conveying, packaging, agriculture, and general industrial drives. All specifications listed in the table are in stock and available for same-day dispatch, packaged in cartons, wooden cases, or on pallets.

2082 Series Double-Pitch Sprockets
Shenma 2082 series double-pitch sprockets are compatible with 2082/216AL double-pitch roller chains (chain pitch 50.8mm, inner width 15.75mm, roller diameter 28.58mm). They are available with 8~96 teeth, outside diameters of 152~1848mm and hub diameters of 75~100mm. All models have a total thickness of 45mm, with three bore sizes: 20mm, 25mm and 30mm. Each sprocket weighs approximately 2.3~96kg. Dimensions correspond to the tooth count. Select the sprocket according to the chain model and required tooth count; the bore and keyway can be machined to suit the shaft diameter. Suitable for low-speed, large-pitch chain drives in conveyor lines, packaging, logistics, agriculture and livestock applications. Tooth induction hardening and other strengthening treatments, as well as custom designs, are available.

Shenma 20A Series (1.2 in) Standard Sprockets
Shenma 20A series (1.2 in) standard sprockets are designed for 100B/20A roller chains, with a sprocket pitch of 31.75 mm and a roller diameter of 19.05 mm. They are suitable for single-strand roller chain drives. The sprockets have a one-piece construction with a hub and are available in 9~43 tooth sizes: outside diameter 107.0~447.0 mm, hub diameter 60~130 mm, overall thickness 40.0~45.0 mm, bore diameter 18/20/25/30 mm, and unit weight 1.20~28.00 kg. As the tooth count increases, the outside diameter increases linearly with the pitch, while hub and bore diameters increase in steps to accommodate greater transmitted torque. The sprockets have a plain bore that can be machined with a keyway or set screw hole as needed. They are suitable for medium- to heavy-duty, low-speed drives in conveyors, packaging machinery, agricultural machinery, and similar equipment. Select the bore size according to the chain specification (20A/100B), required tooth count, and shaft diameter. Too few teeth will increase the polygonal effect, so select the tooth count for the actual operating conditions.

20A Series Standard Double-Row Sprocket (10-fen Double-Row)
The Shenma 20A standard double-row sprocket is a 10-fen double-row roller chain sprocket with a 31.75 mm pitch, designed for double-row roller chain drives. Its body is made from forged A3 steel, and its teeth are induction hardened for better tooth surface wear resistance than standard quenched and tempered parts. Standard sizes range from 10 to 30 teeth, with tooth outside diameters of 117.0~318.7 mm, hub diameters of 67~120 mm, overall thickness BL of 75/78/80 mm, total tooth thickness C of 53 mm, and bore diameters d of 20/25/30 mm (smaller bores are paired with lower tooth counts). Select by chain size 20A, double-row configuration, required tooth count, and shaft diameter. Common sizes across the range are in stock and available for same-day shipment. Packaging options include cartons, wooden crates, or pallets. Suitable for medium- to heavy-duty drives in conveyor lines, packaging machinery, agricultural machinery, mining equipment, and other applications.

Shenma 24A Series (1.5-inch) Standard Sprockets
Shenma 24A series (1.5-inch) standard sprockets are single-strand roller chain sprockets compatible with 120B/24A chains. They have a chain pitch P=38.1mm, roller diameter W=25.4mm, roller bore DR=22.23mm, and sprocket body thickness T=23mm. Available with 10~38 teeth, they have an outside diameter Do of 137.0~477.0mm, boss diameter BD of 75~135mm, overall thickness BL of 45~55mm, bore diameter d of 20~30mm, and individual weight of 2.48~32.20kg. Different bore and tooth count combinations can be selected as needed. Made from forged A3 steel, the sprockets have induction-hardened teeth for good surface hardness and wear resistance, with strong load capacity under impact. They are widely used in conveying machinery, agricultural machinery, packaging lines, and general industrial drives. All models listed in the table are in stock and can ship as soon as the same day, packed in cartons, wooden cases, or on pallets.

24A Standard Double-Row Sprocket (12-fen Double-Row Series)
The Shenma 24A (12-fen) standard double-row sprocket is made from forged A3 steel, with induction-hardened teeth for good surface hardness and wear resistance. It is suitable for medium- to heavy-duty drives using 24A double-row roller chain with a 38.1mm pitch. The catalog covers 16 sizes with 10~25 teeth: outside diameter 137.0~319.0mm, hub diameter 78~130mm, overall thickness 93.00~96.00mm, total tooth width 68.3mm, and bore diameters of 25mm or 30mm. Select primarily by tooth count: both the outside diameter and pitch circle increase as the number of teeth increases. Choose according to the required transmission ratio and available installation space. All sizes listed in the table are in stock and available for same-day shipping. Packaging options include cartons, wooden cases and pallets. Common applications include chain drives on conveyor lines, packaging machinery, agricultural machinery and construction equipment. The sprocket can be paired with double-row roller chain of the same pitch.

25 Series (1/4-inch) Standard Sprocket
The Shenma 25 Series (1/4-inch) standard sprocket is a single-strand sprocket with a standard tooth profile, designed for 1/4″ (6.35 mm) pitch roller chain. The catalog uses tooth count as the primary selection parameter, with 57 sizes ranging from 8 to 64 teeth. The outside diameter Do ranges from 19.5 mm to 131.5 mm, the hub diameter BD from 14 to 132 mm, and the overall thickness BL is 15 mm throughout. Bore diameter d is 6, 8, 10, or 12 mm depending on the tooth count, and unit weight ranges from 0.02 to 0.88 kg. Select the tooth count based on the transmission ratio and available installation space, then check the hub diameter, overall thickness, and bore size. Use with matching 1/4-inch pitch chain. Typical applications include small reduction drives and drive stations in conveying, packaging, textile, and automation equipment.

Shenma 35 Series (06C) Standard Sprocket
The Shenma 35 Series (06C) standard sprocket is designed for 3/8-inch pitch (06C) roller chains. Its tooth profile conforms to 06C chain specifications, with a pitch P of 9.525mm, roller diameter DR of 5.08mm, inner plate width W of 4.78mm, and tooth thickness T of 4mm. It is suitable for light-duty drives, conveyor lines, packaging machinery, and small automation equipment. Select a sprocket based on parameters such as tooth count, outside diameter, hub diameter, overall thickness, bore diameter, and weight.

BS25 Series Sprockets
BS25 series sprockets are designed for double-pitch drives and used with BS25 series roller chains. They are widely used in low- to medium-speed drive applications such as conveyor lines, packaging machinery, and food processing machinery. The catalog uses the BS25-C2xxB model system to distinguish chain sizes and tooth counts: C206B, C208B, C210B, and C212B correspond to different pitch sizes, while the B9N / B10N suffixes indicate the number of teeth (9 teeth and 10 teeth). Key specifications include tooth count, outside diameter, pitch diameter, tooth thickness, hub diameter, overall length, row spacing, weight, bore diameter, and D dimension. The models listed on this page have outside diameters of 63~137 mm, pitch diameters of 55.70~123.30 mm, tooth thicknesses of 3~6 mm, hub diameters of 33~81 mm, weights of 0.15~2.45 kg, and bore diameters of 15~25 mm. Select a model based on the chain size, tooth count, and bore and hub dimensions. More teeth provide smoother operation but increase the outside diameter.

C208/C210 Double-Pitch Conveyor Chain
C208/C210 double-pitch conveyor chains have pitches of 25.40 mm and 31.75 mm, respectively, corresponding to the ANSI C2040/C2050 series. Available in small-roller and large-roller types, the range includes C208A, C208AH, C208BL, C208B, C210A, C210A1, C210B, and variants C210B1~C210B37. They are suitable for low- to medium-speed drives in conveyor lines, packaging machinery, and logistics equipment. Key specifications include roller diameter, pin diameter and length, plate thickness, tensile strength, and average tensile strength. Tensile strength is approximately 14.1 kN for the C208 series and 22.2 kN for the C210 series. Selection should take into account load, sprocket tooth count, center distance, and lubrication conditions.

FBS35B Series Finished Bore Sprockets
Made of high-quality 45 steel; SUS304 stainless steel is available on request. Sprocket teeth are induction hardened and tempered. Packed in cardboard boxes. Black oxide or zinc-plated surface finishes are available. Sprockets marked ★ have a groove on the outside diameter of the hub; see the table for details. Green indicates in-stock items; gray indicates items requiring 15 days of additional machining.

35B Series Single-Strand 45# Steel Series (06C) Shenma Standard Sprockets
The sprockets are machined from 45 steel round bar, with induction-hardened teeth. All models listed in the table are in stock and can be shipped the same day. Packaging options: cartons, wooden crates, and pallets.

FBS80SD Series Finished Bore Sprockets
Made from high-quality 45 steel; SUS304 stainless steel available by custom order. Sprocket teeth are induction-hardened and tempered. Packaging: carton + wooden crate. Optional surface finishes: black oxide or zinc plating.

FBS50SD Series Finished Bore Sprockets
Made of high-quality 45 steel; SUS304 stainless steel available on request. Sprocket teeth are induction hardened and tempered. Packaging: carton + wooden case. Optional surface finishes: black oxide or zinc plating.

FBS50B Series Finished Bore Sprockets
Made from high-quality 45 steel; SUS304 stainless steel is available on request. Sprocket teeth are induction hardened and tempered. Packaging consists of cartons and wooden crates. Black oxide or zinc-plated surface finishes are available. Sprockets marked ★ have a groove on the outer diameter of the hub; see the table for details.

6M Series Shenma Standard 45# Steel Spur Gear (6M)

10A Series 5-fen (10A) Shenma Finished-Bore Sprocket
The sprocket is machined from 45# round steel, with induction-hardened teeth and a black oxide finish. All models listed in the table are in stock and available for same-day shipping. Packaging options: cartons, wooden crates, and pallets.

1M Series Shenma Standard 45# Steel Spur Gear (1M)

16A Series 1-inch (16A) Shenma Finished Bore Sprocket
The sprocket is machined from 45# round steel, with induction-hardened teeth and a black oxide finish. All models listed in the table are in stock and available for same-day shipping. Packaging options: cartons, wooden crates, or pallets.

Dunpai Roller Chains
Dunpai (Shenma Transmission) roller chains engage with sprockets to transmit power and are suitable for long-distance, heavy-duty drives. They offer high power transmission capacity and allowable tension at a lower cost than belt drives. The chains use standardized nominal sizes and include Japanese/American standard A series (40, 50, 60, 80, 100, corresponding to 08A, 10A, 12A, 16A, 20A, etc.) and European/British standard B series (08B, 10B, 12B, 16B, etc.). Chains consist of inner plates, outer plates, pins, rollers, bushings and other components. Compatible accessories include sprockets, idlers, tensioners, chain guides and connecting links. When selecting a chain, confirm the nominal size, series standard, pitch, number of strands and sprocket compatibility.

A Series Short-Pitch Precision Roller Chains
A series short-pitch precision roller chains are manufactured to ISO/ANSI/DIN standard chain numbers (15, 25, 35, 41, 40, 50…240), corresponding to Donghua chain numbers 03C, 04C, 06C, 085, 08A, 10A, 12A, 16A, 20A, 24A, 28A, 32A, 36A, 40A and 48A. They are available in single-, double-, triple- and 4~8-strand configurations. The 03C, 04C and 06C are bush chain variants (roller diameter d1 in the table refers to the outside diameter of the bush). Pitch ranges from 4.7625~76.2 mm, roller diameter from 2.48~47.63 mm, pin diameter from 1.62~23.81 mm, tensile strength from 1.8~1530.9 kN, and weight from 0.08~71.6 kg/m. The link plates are precision-stamped and heat-treated, while the pins and bushes are precision-fitted for wear resistance. These chains are suitable for power transmission and conveying in general machinery.

B Series Short-Pitch Precision Roller Chains
B series short-pitch precision roller chains conform to ISO 606 / DIN 8187 standard dimensions and feature straight link plates. They are a basic chain type for general mechanical power transmission. Available in single-strand (B-1), double-strand (B-2), and triple-strand (B-3) configurations, the range covers chain sizes 04 and 05B through 72B, with pitches from 6.000mm to 114.300mm, roller diameters of 4.00~72.39mm, pin diameters of 1.85~44.48mm, tensile strengths of approximately 3kN to 3750kN (increasing with strand count and size), and weights of 0.11~180kg/m. Complete specifications are provided for each model, including pitch, roller diameter, inner link width, pin diameter, pin length, inner plate height, plate thickness, transverse pitch, tensile strength, and average tensile strength, making it easy to select a chain based on transmission power and operating conditions. Compared with the A series, B series chains have smaller rollers and wider inner links, making them suitable for medium- to low-speed, heavy-load transmission applications.

A Series Heavy-Duty Roller Chain
A series heavy-duty roller chains use the ISO/ANSI chain numbering system and are available in single-strand (-1) and double-strand (-2) configurations. The H in the chain number denotes the heavy-duty type. Single-strand sizes range from 35H-1 to 240H-1, and double-strand sizes from 60H-2 to 240H-2. Pitch ranges from 9.525 to 76.2 mm. Full specifications are available for roller diameter, inner width, pin diameter and length, plate thickness, transverse pitch, tensile strength, and weight per meter. These chains are suitable for heavy-duty power transmission, conveyor lines, construction machinery, and industrial equipment. They offer high load capacity, wear resistance, and smooth operation, and can be selected by chain number.

A Series Straight-Sidebar Roller Chain
The A Series straight-sidebar roller chain is a general-purpose power transmission chain conforming to ISO/ANSI standards. It features straight sidebars and is available in a full range of single-strand and double-strand (Duplex) sizes. Chain sizes range from C08A-1 (equivalent to ANSI 35-1) to heavy-duty sizes such as 240H-2, with pitches of 9.525~76.2mm, roller diameters of 5.08~47.63mm, and tensile strengths of 7.9~1000kN. The H Series is designed for heavy-duty service, with thicker sidebars and larger pins for shock loads and heavy-duty drives. Double-strand chains provide greater load capacity through increased strand spacing. Made from high-quality carbon or alloy steel, the chains are heat-treated, pre-stretched, and treated for corrosion resistance. They offer wear resistance, fatigue resistance, and low elongation, and are widely used for power transmission in industrial machinery, agricultural machinery, conveyor lines, and mining equipment.

Short-Pitch Conveyor Chain with Attachments
This series comprises short-pitch conveyor chains with attachments. The catalog cross-references ISO/DIN chain numbers with Donghua chain numbers. Common chain numbers include 04C, 06C, 08A, 10A through 94A, and B-series chains from 06B—24B. Pitch P ranges from 6.350—282.000 mm. Attachment dimensions include G, F, W, C, T, h4 and d4, for conveyor configurations using bent or straight attachments. Page 12 also provides specifications for straight side plates. Dimensions for the same chain number may vary by attachment type; check the attachment tables when selecting a chain.

ISO/DIN Standard Roller Chains
The ISO/DIN standard roller chain range covers common chain sizes ISO/DIN 25~200 and 06B~24B, corresponding to Donghua chain numbers 04C, 06C, 08A, 10A, 12A, 16A, 20A, 24A, 28A, 32A, 40A and 06B~24B. The chains feature straight side plates and are suitable for general mechanical power transmission and conveying. The catalog provides dimensions including pitch P, G, L, C, F, plate thickness T and da. Pitches range from 6.350~63.500 mm, and chains can be selected by chain number.

Double-Pitch Conveyor Attachment Chain
Double-pitch conveyor attachment chains use both DIN/ISO and ANSI chain designations and are suitable for low- to medium-speed drives and material handling on conveyor lines, packaging machinery, and logistics sorting systems. The range includes 208A/210A/212A/216A/220A/224A and 208B/210B/212B/216B/220B/224B chain sizes, corresponding to ANSI 2040, 2050, 2060, 2080, 2100, and 2120. K1, SK1, SK2, WA1, and other attachments are available. Specifications include pitch P, roller outside diameter G, attachment dimensions F/F1/F2, link plate width W, pin diameters d4/d5, attachment height h4, and C/L, allowing selection based on the items conveyed and mounting method.

Leaf Chains
Leaf chains, also known as forklift chains, consist of interleaved link plates connected by pins. The plates are arranged in lacing patterns such as 2×2, 3×3, and 4×4. These chains offer high load capacity, good fatigue resistance, low elongation, and smooth operation. They are widely used in forklift lifting mechanisms, counterweight systems, machine tool counterweights, lifting platforms, and other reciprocating lifting applications. The catalog lists specifications using both ISO and ANSI chain numbering systems. Key parameters include pitch, plate lacing, plate height, plate thickness, pin diameter, pin length, tensile strength, average tensile strength, and weight per meter. Select a chain based on the rated load, number of sprocket teeth, and available installation space. Refer to the parameter table on the relevant model page for specific values.

Donghua · Shield Double-Speed Chain
Donghua · Shield double-speed chains are primarily used in double-speed conveying sections of assembly and production lines. The difference between the diameters of the large and small rollers allows pallets to travel at approximately 2.5 times the chain speed. Chain numbers include 08BS, 08BSF8, 12BS, 16BS, 100SF1 and 212BS. Pitch ranges from 12.70~38.10 mm, roller diameter from 8.51~19.05 mm, speed roller diameter from 16~48 mm, inner link width from 7.75~25.50 mm, pin diameter from 4.45~9.53 mm, pin length from 27~85 mm (the middle number in the model designation indicates pin length), and plate height from 11.8~30.0 mm. Tensile strength ranges from 18.0~86.7 kN and average tensile strength from 19.8~104.0 kN. The model suffix identifies the roller material: P denotes plastic rollers and C denotes steel rollers, with configurations such as P16/C16 and P28/C28.

SCS High-Precision Sprockets
Shenma Transmission's SCS high-precision sprocket range includes FBS finished-bore sprockets and S series standard sprockets, compatible with 04C, 08A, 08B, 12A, 16A, 24A and other chain sizes. Finished-bore sprockets come with an H7 precision-finished bore, a standard keyway and threaded holes. Common bore diameters range from 10~150 mm, with 14~63 teeth. Made from high-quality 45 steel, they have induction-hardened and tempered teeth, with a choice of black oxide or galvanized finish. Custom SUS304 stainless steel versions are also available. The sprockets are used in conveying, packaging and automation drive systems. Standard products are in stock, individually packaged and available for fast shipping.