Sprockets

06B Shenma Finished Bore Sprocket

06B Shenma Finished Bore Sprocket

The 06B (3/8-inch) Shenma finished bore sprocket is machined from 45# round steel, with induction-hardened teeth and a blackened surface for high wear resistance and strength. It is suitable for use with standard 06B roller chains. Available with 10 to 20 teeth, the sprockets have pitch diameters of 30.8-60.8mm, outside diameters of 34-64mm, hub diameters of 20-43mm, overall lengths of 22-24mm, and weights of 0.08-0.32kg. Finished bore options include 10, 12, 14, 15, 16, 17, 18, 20, and 25mm to suit different shaft diameters. All models listed in the table are in stock and available for same-day shipping. Packaging options include cartons, wooden crates, and pallets.

06B Series Shenma Standard Sprocket

06B Series Shenma Standard Sprocket

The 06B series (3/8-inch) Shenma standard sprocket is designed for single-strand 06B roller chain with a 9.525mm pitch. It is made entirely of forged A3 steel, with induction-hardened teeth for high surface hardness and wear resistance. It is suitable for low- to medium-speed drives in general machinery, conveyor lines, packaging machinery and agricultural machinery. The primary specification is tooth count, with 55 options from 9T~72T. As the tooth count increases, the outside diameter Do ranges from 30.0mm to 221.0mm and the hub diameter BD from 19mm to 85mm. Total thickness B ranges from 18~25mm, and bore diameter d is available in six sizes: 8, 10, 12, 14, 16 and 20mm. Individual weights range from 0.05kg to 2.44kg. Select the model by the required tooth count (transmission ratio/linear speed), then check the bore diameter against the shaft diameter. The bore can be enlarged or a keyway machined if necessary. All specifications listed in the table are in stock and available for same-day shipping, packed in cartons, wooden crates or on pallets.

Shenma 06B 3/8-inch Duplex Standard Sprocket Series

Shenma 06B 3/8-inch Duplex Standard Sprocket Series

The Shenma 06B (3/8-inch) duplex standard sprocket fits 06B-2 duplex roller chain with a 9.525mm pitch. Made from forged A3 steel, it has induction-hardened teeth for good surface hardness and wear resistance, making it suitable for low- to medium-speed drives. The range covers 10~50 teeth, with outside diameters of 34.0~154.0mm, hub diameters of 20~80mm, overall thicknesses of 24/28/35mm, a tooth width of 15.4mm, bore diameters of 8~16mm, and unit weights of 0.07~2.65kg. All sizes are in stock and can ship as early as the same day. Packaging options include cartons, wooden cases, and pallets. These sprockets are widely used in conveyors, packaging machinery, agricultural machinery, and general industrial drives.

08B Shenma Finished Bore Sprocket

08B Shenma Finished Bore Sprocket

The 08B (4 fen) Shenma finished bore sprocket has a 12.7mm pitch, 8.51mm roller diameter, 7.95mm inner width and 7.2mm tooth width. It fits 08B single-strand roller chain. Available with 9T~40T teeth, it has an outer diameter of 41~166.5mm, pitch diameter of 37.13~161.87mm, hub diameter of 24~62mm, overall length of 22~28mm and unit weight of 0.11~1.9kg. The sprocket is machined from 45# round steel (45# steel), with induction-hardened teeth and a black oxide finish for rust protection. Depending on the tooth count, finished bore (hub bore) options include 10, 12, 14, 15, 16, 17, 18, 19, 20, 22, 25, 28, 30, 35, 38, 40, 42 and 45mm. Large and small hubs can be selected separately. Depending on the bore size, 4×1.8 or 5×2.3 keyways and M4 set screw holes are also available. All specifications listed in the table are in stock and available for same-day dispatch. Packaging options include cartons, wooden crates and pallets.

08B Series Double-Row Sprockets

08B Series Double-Row Sprockets

The 08B double-row sprocket, also known as a 4-fen double-row sprocket, is a standard Shenma sprocket made from forged A3 steel. Its teeth are induction hardened for good wear resistance and load capacity. It is suitable for 08B double-row roller chain drives. The catalog lists standard sizes from 10 to 60 teeth, with dimensions including outside diameter Do, boss diameter BD, total thickness C and bore diameter d. All models listed in the series are in stock and available for same-day shipping. Packaging options include cartons, wooden cases and pallets.

08B 45# Steel Standard Double-Single Sprocket

08B 45# Steel Standard Double-Single Sprocket

The Shenma 08B (4-fen) standard double-single sprocket is machined from 45# steel round bar, with induction-hardened teeth, for drive applications using 08B chain. The catalog lists standard sizes with 11–28 teeth, outside diameters of 50–118mm, hub diameters of 29–97mm, a total thickness of 30mm, an extended version thickness of 35mm, row spacing of 23mm, extended version row spacing of 28mm, bore diameters of 10–18mm, and an approximate unit weight of 0.30–2.21kg. All models listed in the table are in stock and available for same-day shipping. Packaging options include cartons, wooden crates, or pallets.

10A/12A Shenma Finished-Bore Sprockets

10A/12A Shenma Finished-Bore Sprockets

Shenma finished-bore sprockets (10A/50B, 12A/60B) are suitable for 5-fen (10A) and 6-fen (12A) roller chain drives. Made from 45# steel, they have induction-hardened teeth and a blackened finish for good wear resistance and fatigue strength. The 10A/50B chain has pitch P=15.875mm, W=9.53mm, DR=10.16mm and T=8.7mm. Sprockets have 10~35 teeth, an outer diameter of 57.5~184mm, a pitch diameter of 51.37~177.10mm, a hub diameter of 35~75mm, an overall length of 24~31mm, a unit weight of 0.27~2.2kg, a finished bore of 10~45mm, a chain groove width of 4.1mm and an M4 screw hole. The 12A/60B chain has pitch P=19.05mm, W=12.7mm, DR=11.91mm and T=11.7mm. Sprockets have 9~30 teeth, an outer diameter of 64~190mm, a pitch diameter of 55.70~182.25mm, a hub diameter of 36~75mm, an overall length of 27~36mm, a unit weight of 0.41~3.5kg and a finished bore of 1

10A Series (5/8-inch) Shenma Standard Sprocket

10A Series (5/8-inch) Shenma Standard Sprocket

The 10A series (5/8-inch) Shenma standard sprocket is designed for roller chain drives and fits 10A (5/8-inch) chains. The catalog lists the outside diameter D0, hub diameter BD, overall thickness BL, bore diameter d, and weight for sprockets with 9~76 teeth, making it easy to select a model based on the transmission ratio and available installation space. The sprocket has a one-piece construction with a hub and is suitable for general industrial drives, conveying equipment, agricultural machinery, and similar applications. Confirm the required dimensions based on the chain specification, tooth count, shaft diameter, and load.

10A Double-Row Sprocket (5/8 inch)

10A Double-Row Sprocket (5/8 inch)

The 10A (5/8 inch) standard double-row sprocket is compatible with ISO 10A / ANSI 50 double-row roller chains (15.875mm pitch). Made from forged A3 steel, it has induction-hardened teeth for high surface hardness and wear resistance. It is suitable for low- to medium-speed drives in general machinery, conveyor lines, packaging equipment and food machinery. The catalog includes 37 sizes with 10~46 teeth: tooth outside diameter 58.0~238.0mm, hub diameter 30~100mm, overall thickness BL 39.00~50.00mm, total tooth thickness C 26.0mm, bore diameter 10~25mm, and unit weight 0.31~14.88kg. All sizes are in stock and available for same-day dispatch, packaged in cartons, wooden cases or on pallets. Select a size based on chain number 10A-2 and the required tooth count. As the tooth count increases, the outside diameter, weight and torque capacity increase accordingly, while the transmission ratio decreases.

10A Series 5/8-Inch Single-Strand Standard Sprocket, 45# Steel

10A Series 5/8-Inch Single-Strand Standard Sprocket, 45# Steel

The 10A series 5/8-inch single-strand standard sprocket is made of 45# steel and fits ANSI 10A single-strand roller chain with a 15.875mm pitch. It is available in 40 sizes with 10~50 teeth. The teeth are induction hardened for good surface hardness and wear resistance, making the sprocket suitable for low- to medium-speed drives in general machinery, conveyor lines, packaging equipment and other applications. For each tooth count, the catalog lists the outside diameter Do (57.5~259mm), hub diameter BD (40~100mm), overall thickness BL (28~40mm), bore diameter d (10~20mm) and weight (0.27~6.72kg). Select a sprocket by tooth count and bore size; the bore can be further machined with a keyway or modified as needed. All sizes listed in the table are in stock and available for same-day dispatch, packed in cartons, wooden cases or on pallets.

10A 45# Steel Standard Double-Single Sprocket

10A 45# Steel Standard Double-Single Sprocket

The Shenma 10A (5/8-inch) standard double-single sprocket is machined from 45# round steel, with induction-hardened teeth for high surface hardness, wear resistance and durability. It is suitable for 10A double-row roller chain drives with a 15.875mm pitch. Sizes range from 11~30 teeth, with outside diameters of 63~158mm, hub diameters of 35~130mm, a standard overall thickness of 35mm (40mm for the extended version), row spacing of 27mm (32mm for the extended version), bore diameters of 12~20mm and unit weights of 0.51~4.82kg. The full range is regularly stocked and available for same-day dispatch, with carton, wooden crate or pallet packaging.

12A Shenma Finished Bore Sprocket

12A Shenma Finished Bore Sprocket

The 12A (6 fen) Shenma finished bore sprocket is a single-strand, standard-bore plate sprocket compatible with 12A/60B roller chains (chain pitch P=19.05mm, inner plate width W=12.7mm, roller diameter DR=11.91mm, and chain plate thickness T=11.7mm). Made from 45# steel, it has high-frequency hardened teeth for a hard, wear-resistant tooth surface and a black oxide finish for rust protection. Finished (pre-machined) bore sizes are available in 18 options: 10, 12, 14, 15, 16, 17, 18, 20, 22, 25, 28, 30, 32, 35, 38, 40, 42, and 45mm. The bore can be enlarged as needed or fitted directly. Corresponding keyway B sizes are 4×1.8 (bore diameters 10, 12) and 5×2.3 (bore diameter 14), with threaded holes M of M4 and M5, respectively. Tooth counts range from 9~30, outside diameter Do from 64mm to 190mm, pitch diameter D1 from 55.70mm to 182.25mm, and hub diameter BD from 36~75mm (larger tooth counts have dual hubs of 56/67, 57/67, 64/67, etc.); overall length

12A Series (6-fen) Shenma Standard Sprockets

12A Series (6-fen) Shenma Standard Sprockets

The 12A series (6-fen) Shenma standard sprockets are designed for 12A/60B roller chains. They have a 19.05mm pitch, an 11.91mm roller diameter, and a 12.7mm inner plate width. The catalog provides a complete dimension table by tooth count, covering 9–60 teeth, as well as 65, 70, 75, and 80 teeth. Parameters for each tooth count include outside diameter, hub diameter, overall thickness, bore diameter, and weight, making it easy to select a sprocket based on transmission ratio and installation space. Standard sprockets are commonly used in chain drives for motor and gearbox outputs, conveyor lines, packaging machinery, and agricultural machinery, and can be paired with chains of the same pitch and suitable shaft ends. Most overall thicknesses in the table range from 27–30mm, while bore diameters vary with tooth count from approximately 12–16mm.

12A Standard Double-Row Sprocket

12A Standard Double-Row Sprocket

The 12A standard double-row sprocket, commonly known as a 6-fen double-row sprocket, has a 19.05mm pitch and is compatible with 12A double-row roller chain drives. It is available in 37 sizes with 10~46 teeth: outside diameter 70.0~372.0mm, boss diameter 40~110mm, overall thickness 45.00~60.00mm, total tooth thickness 34.0mm across all sizes, bore diameter 12~25mm, and unit weight 0.58~27.2kg. The sprocket body is made from forged A3 steel, and the teeth are induction hardened for wear and impact resistance. It is suitable for medium- and low-speed, heavy-duty drives in conveyor lines, agricultural machinery, packaging equipment, and general industrial equipment. All sizes are in stock and available for same-day dispatch, with packaging in cartons, wooden cases, or on pallets. Select the appropriate size based on the chain specification (12A double-row), required tooth count, and equipment shaft diameter (bore d). Higher tooth counts provide smoother operation but increase the outside diameter and weight.

12A Double-Row Standard 45# Steel Sprocket

12A Double-Row Standard 45# Steel Sprocket

The Shenma 12A (6 fen) double-row standard 45# steel sprocket is designed for 12A double-row roller chain with a 19.05 mm pitch. It is suitable for applications requiring double-row chain drives, higher torque transmission or a higher safety factor. The sprocket body is turned from 45# round steel, and the teeth are induction hardened for high surface hardness and wear resistance, extending their service life with the chain. The catalog lists 27 common sizes from 10 to 36 teeth, along with outside diameter Do (70~251 mm), hub diameter BD (42~110 mm), overall thickness BL (52~60 mm), total tooth width C (34.1 mm), bore diameter d (12~25 mm) and unit weight (0.68~12.77 kg), making selection and drive calculations easier. The full range is regularly stocked and available for same-day dispatch. The bore can be further machined as needed, including enlargement and keyway cutting. Packaging options include cartons, wooden cases or pallets.

Shenma 16A Series (1-inch) Standard Sprockets

Shenma 16A Series (1-inch) Standard Sprockets

Shenma 16A series (1-inch) standard sprockets are single-strand sprockets with an integral hub, designed for roller chains with a 1-inch pitch (25.4mm, corresponding to the ANSI 80 series). They are widely used in conveyor lines, packaging machinery, agricultural machinery, and general power transmission systems. The catalog lists 47 common tooth counts from 9T to 65T, with tooth count as the sole specification variable. For each size, it provides the outside diameter Do (85.0~536.0mm), hub diameter BD (48~110mm), overall thickness BL (31.0~45.0mm), bore diameter d (14/16/18/20/25mm), and unit weight (0.58~17.80kg). Sprockets with fewer teeth have smaller bores and thinner bodies, while those with more teeth have thicker bodies and larger hubs for rigidity. Select the tooth count based on the transmission ratio, center distance, and chain speed, then choose a bore to match the shaft diameter or machine a keyway as needed.

16A Standard Duplex Sprocket

16A Standard Duplex Sprocket

The 16A standard duplex sprocket, commonly known as an 8-fen duplex sprocket, is designed for 16A duplex roller chain drives with a 25.4mm pitch. It is machined in one piece from forged A3 steel, with induction-hardened teeth for high surface hardness and wear resistance. It maintains consistent meshing accuracy and service life under medium to heavy loads and continuous operation. Standard sizes range from 10T to 50T, with outside diameter Do from 94.0mm to 416.0mm, boss diameter BD from 52~120mm, overall thickness BL from 65~73mm, and total tooth thickness C of 43.0mm throughout. Standard bore diameters d are 16mm and 20mm; lower tooth-count sizes are also available with a 16mm bore. Unit weight ranges from 1.50~37.40kg. The entire range is normally stocked for same-day dispatch and is packed in cartons, wooden cases or on pallets. These sprockets are suitable for conveyors, packaging machinery, agricultural machinery and general industrial drive shafts. The same page also lists specifications for 6-fen (12A) duplex sprockets for comparison only; they are not part of this series.

Shenma 20A Series (1.2 in) Standard Sprockets

Shenma 20A Series (1.2 in) Standard Sprockets

Shenma 20A series (1.2 in) standard sprockets are designed for 100B/20A roller chains, with a sprocket pitch of 31.75 mm and a roller diameter of 19.05 mm. They are suitable for single-strand roller chain drives. The sprockets have a one-piece construction with a hub and are available in 9~43 tooth sizes: outside diameter 107.0~447.0 mm, hub diameter 60~130 mm, overall thickness 40.0~45.0 mm, bore diameter 18/20/25/30 mm, and unit weight 1.20~28.00 kg. As the tooth count increases, the outside diameter increases linearly with the pitch, while hub and bore diameters increase in steps to accommodate greater transmitted torque. The sprockets have a plain bore that can be machined with a keyway or set screw hole as needed. They are suitable for medium- to heavy-duty, low-speed drives in conveyors, packaging machinery, agricultural machinery, and similar equipment. Select the bore size according to the chain specification (20A/100B), required tooth count, and shaft diameter. Too few teeth will increase the polygonal effect, so select the tooth count for the actual operating conditions.

20A Series Standard Double-Row Sprocket (10-fen Double-Row)

20A Series Standard Double-Row Sprocket (10-fen Double-Row)

The Shenma 20A standard double-row sprocket is a 10-fen double-row roller chain sprocket with a 31.75 mm pitch, designed for double-row roller chain drives. Its body is made from forged A3 steel, and its teeth are induction hardened for better tooth surface wear resistance than standard quenched and tempered parts. Standard sizes range from 10 to 30 teeth, with tooth outside diameters of 117.0~318.7 mm, hub diameters of 67~120 mm, overall thickness BL of 75/78/80 mm, total tooth thickness C of 53 mm, and bore diameters d of 20/25/30 mm (smaller bores are paired with lower tooth counts). Select by chain size 20A, double-row configuration, required tooth count, and shaft diameter. Common sizes across the range are in stock and available for same-day shipment. Packaging options include cartons, wooden crates, or pallets. Suitable for medium- to heavy-duty drives in conveyor lines, packaging machinery, agricultural machinery, mining equipment, and other applications.

Shenma 24A Series (1.5-inch) Standard Sprockets

Shenma 24A Series (1.5-inch) Standard Sprockets

Shenma 24A series (1.5-inch) standard sprockets are single-strand roller chain sprockets compatible with 120B/24A chains. They have a chain pitch P=38.1mm, roller diameter W=25.4mm, roller bore DR=22.23mm, and sprocket body thickness T=23mm. Available with 10~38 teeth, they have an outside diameter Do of 137.0~477.0mm, boss diameter BD of 75~135mm, overall thickness BL of 45~55mm, bore diameter d of 20~30mm, and individual weight of 2.48~32.20kg. Different bore and tooth count combinations can be selected as needed. Made from forged A3 steel, the sprockets have induction-hardened teeth for good surface hardness and wear resistance, with strong load capacity under impact. They are widely used in conveying machinery, agricultural machinery, packaging lines, and general industrial drives. All models listed in the table are in stock and can ship as soon as the same day, packed in cartons, wooden cases, or on pallets.

24A Standard Double-Row Sprocket (12-fen Double-Row Series)

24A Standard Double-Row Sprocket (12-fen Double-Row Series)

The Shenma 24A (12-fen) standard double-row sprocket is made from forged A3 steel, with induction-hardened teeth for good surface hardness and wear resistance. It is suitable for medium- to heavy-duty drives using 24A double-row roller chain with a 38.1mm pitch. The catalog covers 16 sizes with 10~25 teeth: outside diameter 137.0~319.0mm, hub diameter 78~130mm, overall thickness 93.00~96.00mm, total tooth width 68.3mm, and bore diameters of 25mm or 30mm. Select primarily by tooth count: both the outside diameter and pitch circle increase as the number of teeth increases. Choose according to the required transmission ratio and available installation space. All sizes listed in the table are in stock and available for same-day shipping. Packaging options include cartons, wooden cases and pallets. Common applications include chain drives on conveyor lines, packaging machinery, agricultural machinery and construction equipment. The sprocket can be paired with double-row roller chain of the same pitch.

25 Series (1/4-inch) Standard Sprocket

25 Series (1/4-inch) Standard Sprocket

The Shenma 25 Series (1/4-inch) standard sprocket is a single-strand sprocket with a standard tooth profile, designed for 1/4″ (6.35 mm) pitch roller chain. The catalog uses tooth count as the primary selection parameter, with 57 sizes ranging from 8 to 64 teeth. The outside diameter Do ranges from 19.5 mm to 131.5 mm, the hub diameter BD from 14 to 132 mm, and the overall thickness BL is 15 mm throughout. Bore diameter d is 6, 8, 10, or 12 mm depending on the tooth count, and unit weight ranges from 0.02 to 0.88 kg. Select the tooth count based on the transmission ratio and available installation space, then check the hub diameter, overall thickness, and bore size. Use with matching 1/4-inch pitch chain. Typical applications include small reduction drives and drive stations in conveying, packaging, textile, and automation equipment.

Shenma 35 Series (06C) Standard Sprocket

Shenma 35 Series (06C) Standard Sprocket

The Shenma 35 Series (06C) standard sprocket is designed for 3/8-inch pitch (06C) roller chains. Its tooth profile conforms to 06C chain specifications, with a pitch P of 9.525mm, roller diameter DR of 5.08mm, inner plate width W of 4.78mm, and tooth thickness T of 4mm. It is suitable for light-duty drives, conveyor lines, packaging machinery, and small automation equipment. Select a sprocket based on parameters such as tooth count, outside diameter, hub diameter, overall thickness, bore diameter, and weight.

FBS35B Series Finished Bore Sprockets

FBS35B Series Finished Bore Sprockets

Made of high-quality 45 steel; SUS304 stainless steel is available on request. Sprocket teeth are induction hardened and tempered. Packed in cardboard boxes. Black oxide or zinc-plated surface finishes are available. Sprockets marked ★ have a groove on the outside diameter of the hub; see the table for details. Green indicates in-stock items; gray indicates items requiring 15 days of additional machining.

35B Series Single-Strand 45# Steel Series (06C) Shenma Standard Sprockets

35B Series Single-Strand 45# Steel Series (06C) Shenma Standard Sprockets

The sprockets are machined from 45 steel round bar, with induction-hardened teeth. All models listed in the table are in stock and can be shipped the same day. Packaging options: cartons, wooden crates, and pallets.

FBS50SD Series Finished Bore Sprockets

FBS50SD Series Finished Bore Sprockets

Made of high-quality 45 steel; SUS304 stainless steel available on request. Sprocket teeth are induction hardened and tempered. Packaging: carton + wooden case. Optional surface finishes: black oxide or zinc plating.

FBS50B Series Finished Bore Sprockets

FBS50B Series Finished Bore Sprockets

Made from high-quality 45 steel; SUS304 stainless steel is available on request. Sprocket teeth are induction hardened and tempered. Packaging consists of cartons and wooden crates. Black oxide or zinc-plated surface finishes are available. Sprockets marked ★ have a groove on the outer diameter of the hub; see the table for details.

10A Series 5-fen (10A) Shenma Finished-Bore Sprocket

10A Series 5-fen (10A) Shenma Finished-Bore Sprocket

The sprocket is machined from 45# round steel, with induction-hardened teeth and a black oxide finish. All models listed in the table are in stock and available for same-day shipping. Packaging options: cartons, wooden crates, and pallets.

1M Series Shenma Standard 45# Steel Spur Gear (1M)

1M Series Shenma Standard 45# Steel Spur Gear (1M)

16A Series 1-inch (16A) Shenma Finished Bore Sprocket

16A Series 1-inch (16A) Shenma Finished Bore Sprocket

The sprocket is machined from 45# round steel, with induction-hardened teeth and a black oxide finish. All models listed in the table are in stock and available for same-day shipping. Packaging options: cartons, wooden crates, or pallets.

SCS High-Precision Sprockets

SCS High-Precision Sprockets

Shenma Transmission's SCS high-precision sprocket range includes FBS finished-bore sprockets and S series standard sprockets, compatible with 04C, 08A, 08B, 12A, 16A, 24A and other chain sizes. Finished-bore sprockets come with an H7 precision-finished bore, a standard keyway and threaded holes. Common bore diameters range from 10~150 mm, with 14~63 teeth. Made from high-quality 45 steel, they have induction-hardened and tempered teeth, with a choice of black oxide or galvanized finish. Custom SUS304 stainless steel versions are also available. The sprockets are used in conveying, packaging and automation drive systems. Standard products are in stock, individually packaged and available for fast shipping.

A Series High-Precision Sprockets

A Series High-Precision Sprockets

The A Series high-precision sprockets are a standard range for roller chain drives, available by chain size (25, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100, through to 270 and others). The range covers everything from light-duty drives with a small pitch of 6.35mm to heavy-duty drives with a large pitch of over 200mm. The catalog provides comprehensive tooth profile and hub dimensions for each size: pitch P, roller diameter D, tooth root height h, chamfer height A, chamfer width C, chamfer radius R, row spacing t, single-row tooth thicknesses t1 and t2, double-row tooth thickness options, and tooth space widths B1~B4. This makes it easy to select a matching sprocket by chain specification, number of rows (single/double/multiple) and tooth count. Precisely machined tooth profiles ensure smooth engagement, low drive noise and minimal wear. These sprockets are suitable for conveyor lines, packaging machinery, agricultural machinery, food processing machinery and general industrial drives. To select a sprocket, first determine the pitch and roller diameter from the chain model, then choose the tooth count based on the transmission ratio and the number of rows and tooth thickness based on the load. Finally, select the hub and chamfer configuration to suit the shaft diameter and available installation space.

FBS Series Finished-Bore Sprockets

FBS Series Finished-Bore Sprockets

FBS series finished-bore sprockets are high-precision standard sprockets manufactured by Shenma Transmission. Supplied with machined bores, they are suitable for standard roller chain drives such as 06B and 35B. Their pitch, inner width, roller diameter and tooth width are matched to chain standards. Precision-finished teeth ensure smooth engagement, low transmission noise and long wear life. They are commonly used with gearmotors, conveyor lines, packaging machinery and agricultural machinery, and are available in a choice of tooth counts and finished bore sizes.

FBS Series Finished-Bore Sprockets

FBS Series Finished-Bore Sprockets

FBS series finished-bore sprockets are ANSI-standard sprockets manufactured by Shenma Transmission (SCS High-Precision Sprockets). They come with a finished bore, keyway, and tapped set-screw holes, ready for direct installation on a gearbox or drive shaft without additional boring or keyway cutting. They are compatible with standard roller chains including 08A(40), 16A(80), 20A(100), and 24A(120), with chain pitches of 12.7~38.1 mm and inner widths of 7.95~25.4 mm. Common tooth counts range from 10~30, and finished bore diameters from 25~80 mm. Keyway sizes are matched to the bore diameter (8×3.3 to 22×5.4), and tapped holes range from M8~M16. Outside diameter, pitch diameter, hub diameter, overall length, and weight are specified by tooth count. The sprockets are made of high-quality 45 steel, with teeth induction hardened and tempered for improved wear resistance. SUS304 stainless steel is available by custom order. They are packed in cartons and wooden crates. Standard sizes are available from stock, with delivery in 15 days for additional orders and 30 days for custom orders.

FBS Series Finished Bore Sprockets

FBS Series Finished Bore Sprockets

FBS series finished bore sprockets are standard sprockets for mechanical power transmission. Their finished bores allow direct mounting on shafts, making them suitable for transmitting power in chain drive systems. The catalog lists chain number, tooth count, chain pitch P, chain inner width W, roller diameter Dr, and tooth width T as selection parameters. This page covers FBS50B and FBS60B. The FBS60B is listed as compatible with 12A chain, with a pitch of 19.05 mm, inner width of 12.7 mm, roller diameter of 11.91 mm, tooth width of 11.7 mm, and 9 teeth. Finished bore sprockets are commonly used in conveying, packaging, agricultural machinery, and general industrial drives. When selecting a sprocket, check the chain specification, tooth count, and bore size.

FBS Series Finished Bore Sprockets

FBS Series Finished Bore Sprockets

FBS series finished bore sprockets are suitable for roller chain drive systems using 10A, 12A and similar chains. The finished bore allows direct installation. FBS50SD fits 10A chain (pitch 15.875 mm, inner width 9.53 mm, roller diameter 10.16 mm, tooth width 8.7 mm); FBS60SD fits 12A chain (pitch 19.05 mm, inner width 12.7 mm, roller diameter 11.91 mm, tooth width 11.7 mm). These sprockets feature standardized tooth profiles and are designed for high quality and industry standardization. They can be used in general machinery applications such as conveying and power transmission. Select the appropriate sprocket based on the chain number, number of teeth and finished bore size.

Double-Drive Sprocket

Double-Drive Sprocket

A double-drive sprocket is designed for use with double-row roller chains and is widely used in automated conveyor lines, power transmission systems, and similar applications. The catalog lists several chain pitch options: 12.7 mm, 15.875 mm, 19.05 mm, 25.4 mm, and 31.75 mm. Each pitch corresponds to specific parameters, including chain inner width W (7.95~19.05 mm), roller diameter Dr (7.92~19.05 mm), and tooth width T (7.2~17.6 mm), ensuring a precise match with the corresponding chain. Sprockets are typically made from carbon steel or stainless steel and may be heat-treated or surface-treated to improve wear resistance. Selection depends on chain pitch, tooth count, bore diameter, and mounting method. No specific model codes are provided on this page; orders must be customized or selected according to the required parameters.

Shenma Sprockets and Gears

Shenma Sprockets and Gears

Shenma sprockets and gears have been a core product line for Shenma Transmission for more than a decade, offering excellent value, wear resistance and long service life. A comprehensive range of standard semi-finished sprockets and gears is kept in stock, with consistently maintained dimensions that simplify equipment selection and installation and provide an alternative to expensive parts sold on online platforms. Finished sprockets were added to inventory in 2023, and standard single-strand finished sprockets were fully stocked by the end of that year, enabling quick purchases for customers who keep little or no inventory. Custom non-standard products are made to high quality standards and delivered on time, supporting the maintenance and outfitting of chain drives, gear drives and related machinery. This catalog page does not list specific tooth counts, pitches, bore diameters, materials or model codes.

8-fen (16A) Shenma finished-bore sprocket

8-fen (16A) Shenma finished-bore sprocket

The 8-fen (16A) Shenma finished-bore sprocket is suitable for roller chain drives with a 25.4mm pitch (8-fen/16A). It is available with 10~20 teeth, an outside diameter of 93~173mm, a pitch diameter of 82.20~162.37mm, a hub diameter of 50~85mm, an overall length of 35~40mm, and a unit weight of 1.02~3.6kg. Finished bores are available in small-hub and large-hub versions: small-hub bore diameters are 25/28/30/32/35/38/40/42mm, and large-hub bore diameters are 45/48/50/55/60mm. Select the appropriate bore to match the shaft diameter. The sprocket body is turned from 45# round steel, with induction-hardened teeth for improved wear resistance and a black oxide finish for rust protection. All specifications listed in the table are in stock and available for same-day shipping. Packaging options include cartons, wooden cases, or pallets.

Shenma Double-Single Sprocket

Shenma Double-Single Sprocket

The Shenma double-single sprocket is a sprocket and gear transmission component designed for applications requiring engagement with a double-row chain or a simulated double-row arrangement. The catalog lists selection parameters including model, number of teeth, outside diameter D, pitch diameter P, row spacing C, meshing diameter B, bore diameter d, number of sprocket faces, and total thickness B. The sprocket is made from 45# steel, with induction-hardened teeth for improved wear resistance. All models in the table are in stock and available for same-day dispatch, packaged in cartons, wooden cases, or on pallets. Specific models and dimensions are not listed on this page; consult the complete table or confirm with the supplier before selecting a product.

Shenma Standard 08B Double-Row 45# Steel Sprocket Series

Shenma Standard 08B Double-Row 45# Steel Sprocket Series

The Shenma standard 08B double-row 45# steel sprocket series is designed for use with 08B (4-fen, 12.7mm pitch) double-row roller chain. Made from 45# steel, the sprockets have induction-hardened teeth for high surface hardness and wear resistance, making them suitable for medium- to low-speed, heavy-duty drives. The catalog lists the tooth outside diameter Do, boss diameter BD, overall thickness BL, total tooth thickness C, bore diameter d and weight for each tooth count from 10~43. Tooth outside diameters range from 46mm to 249mm, boss diameters from 31.5~107mm, overall thicknesses from 38~51mm, and bore diameters from 10~20mm, with allowances for bores above 20mm on some higher tooth-count sizes. Total tooth thickness is 21mm throughout, and weights range from 0.30~8.91kg. All standard products in the series are in stock and available for same-day shipping. Packaging options include cartons, wooden crates and pallets. They are widely used on conveyor lines and at shaft ends in packaging machinery, agricultural machinery and general power transmission equipment.

Shenma 10A Double-Row 45# Steel Standard Sprocket Series

Shenma 10A Double-Row 45# Steel Standard Sprocket Series

The Shenma 10A (5/8-inch) double-row standard sprocket is made of 45# steel and designed for 10A double-row roller chain drives. Its teeth are induction-hardened for good wear resistance and load capacity. The catalog lists sizes from 10T~42T, with outside diameters of approximately 58~260 mm, hub diameters of 40.5~110 mm, overall thicknesses of 45~55 mm, total tooth thickness of 26.5 mm, bore diameters of 10~25 mm, and individual weights of approximately 0.45~11.4 kg. All listed models are in stock and available for same-day dispatch. Packaging options include cartons, wooden cases, or pallets. These sprockets are suitable for chain drives in conveying, packaging, agricultural, and general industrial machinery.

Standard Double-Single Sprocket in 45# Steel

Standard Double-Single Sprocket in 45# Steel

Shenma Transmission's standard double-single sprockets are made from 45# steel, with high-frequency hardened teeth for good surface hardness and wear resistance. They are suitable for double-row roller chain drives. The catalog offers three row spacing series of 28mm, 34mm and 41mm, with 12~23 teeth; tooth outside diameter Do 55~174mm, hub diameter BD 34~134mm, overall thickness BL 35~55mm, bore diameter d 10~20mm, and unit weight 0.3~8.03kg. When selecting a sprocket, determine row spacing C from the chain specification, then select the number of teeth based on the required transmission ratio and center distance. The bore can be selected to match the shaft diameter or machined to size. All models listed in the table are in stock and available for same-day dispatch, packed in cartons, wooden cases or on pallets.

FBS06B Finished-Bore Sprocket

FBS06B Finished-Bore Sprocket

The FBS06B finished-bore sprocket is a standardized sprocket for 06B roller chains. It comes with a finished bore and can be mounted directly on a drive shaft without further machining, making it suitable for low-power drives in conveying, packaging, light industrial machinery, and similar applications. Designed for 06B chain, the series has a chain pitch P of 9.525 mm, chain inner width W of 5.72 mm, roller diameter Dr of 6.35 mm, and tooth width T of 5.3 mm. These dimensions are fully compatible with the internationally used 06B chain (equivalent in size to ANSI 35). The catalog lists dimensions by tooth count, including the corresponding tooth-count code, pitch circle diameter, outside diameter, root diameter, hub outside diameter, overall width, finished bore diameter, and keyway. Select the required sprocket from the table based on tooth count and shaft diameter. Made from medium-carbon or alloy steel blanks, the sprockets are formed by hobbing or shaping and heat-treated at the tooth surfaces. They offer accurate tooth profiles, smooth and quiet operation, and good wear resistance, making them a common alternative to imported standard sprockets in chain drive systems.

FBS25B Series Finished Bore Sprockets

FBS25B Series Finished Bore Sprockets

Shenma Transmission FBS25B finished bore sprockets are designed for 04C (25B) single-strand roller chain, with a chain pitch of 6.35 mm, inner chain width of 3.18 mm, roller diameter of 3.3 mm and tooth width of 2.8 mm. Available with 14~63 teeth, they have an outer diameter of 32~130 mm, pitch diameter of 28.54~127 mm, hub diameter of 20~35 mm, overall length of 15 mm and a unit weight of approximately 0.05~0.32 kg. The finished bore is machined to H7 tolerance and includes a keyway and threaded holes for set screws. Bore sizes of 10/12/15/16/18/20 mm are available, with corresponding keyways of 3×1.4, 4×1.8, 5×2.3 and 6×2.8 and threaded holes of M4/M5/M6. Made from high-quality 45 steel, the teeth are induction hardened and tempered. Custom 5U5304 stainless steel versions are available, with black oxide or zinc-plated finishes. Packaging consists of cartons and wooden cases.

FBS60B Finished Bore Sprocket

FBS60B Finished Bore Sprocket

The FBS60B finished bore sprocket is a Jiama Transmission product designed for 12A roller chain drive systems. Its finished bore allows it to be installed directly. Key catalog specifications include a chain pitch of 19.05 mm, chain inner width of 12.7 mm, roller diameter of 11.91 mm, tooth width of 11.7 mm, and 9 teeth. Designed for standardized chain drives, it is commonly used in conveyors, packaging equipment, agricultural machinery, and general industrial drives. Select the sprocket according to the chain number, tooth count, finished bore size, and available installation space to ensure proper chain engagement. The page's OCR table contains duplicate entries; refer to the specifications corresponding to chain number 12A.

FBS60SD Finished Bore Sprocket

FBS60SD Finished Bore Sprocket

The FBS60SD finished bore sprocket is suitable for 12A (No. 60) roller chain, with a chain pitch of 19.05mm, an inner chain width of 12.7mm, a roller diameter of 11.91mm, and a tooth width of 11.7mm. The bore is finish-machined at the factory for direct installation on a standard shaft, reducing on-site machining. Typically made from 45# steel or medium-carbon steel, the sprocket has induction-hardened teeth for good wear and impact resistance. It is widely used in conveyor, packaging machinery, agricultural machinery, and other drive systems. Refer to the specification table when selecting the number of teeth, bore diameter, and keyway dimensions.

S06 Series Sprockets

S06 Series Sprockets

S06 series sprockets are SCS high-precision sprockets designed primarily to transmit power by engaging with chains in mechanical drive systems. The catalog organizes selections by chain number, No. (sequence number), and tooth count. They are suitable for chain drives requiring high precision, wear resistance, and reliable engagement. Specific chain numbers, tooth counts, and overall dimensions must be confirmed against the relevant catalog tables. The OCR table on this page contains many duplicate column headings and does not provide complete model codes that can be directly referenced, so no specific SKUs are generated.