Model · FBS60SD Finished Bore Sprocket
FBS60SD Finished Bore Sprocket
The FBS60SD finished bore sprocket is suitable for 12A (No. 60) roller chain, with a chain pitch of 19.05mm, an inner chain width of 12.7mm, a roller diameter of 11.91mm, and a tooth width of 11.7mm. The bore is finish-machined at the factory for direct installation on a standard shaft, reducing on-site machining. Typically made from 45# steel or medium-carbon steel, the sprocket has induction-hardened teeth for good wear and impact resistance. It is widely used in conveyor, packaging machinery, agricultural machinery, and other drive systems. Refer to the specification table when selecting the number of teeth, bore diameter, and keyway dimensions.
Overview
The FBS60SD finished bore sprocket is suitable for 12A (No. 60) roller chain, with a chain pitch of 19.05mm, an inner chain width of 12.7mm, a roller diameter of 11.91mm, and a tooth width of 11.7mm. The bore is finish-machined at the factory for direct installation on a standard shaft, reducing on-site machining. Typically made from 45# steel or medium-carbon steel, the sprocket has induction-hardened teeth for good wear and impact resistance. It is widely used in conveyor, packaging machinery, agricultural machinery, and other drive systems. Refer to the specification table when selecting the number of teeth, bore diameter, and keyway dimensions.
Product category: Power Transmission Components/Sprockets and Chains/Sprockets
Models & specifications
| Model / Name | Chain number | Inner width (mm) | Pitch (mm) | Roller diameter (mm) | Tooth width (mm) |
|---|---|---|---|---|---|
| FBS60SD FBS60SD Finished Bore Sprocket (12A) | 12A | 12.7 | 19.05 | 11.91 | 11.7 |





