Industrial Control · Motor Drive

2MS-N Series Two-Phase Stepper Motors

2MS-N Series Two-Phase Stepper Motors

The 2MS-N series consists of two-phase hybrid stepper motors with dual-shaft designs and a uniform step angle of 1.8° (200 full steps per revolution). Three mounting flange sizes are available: □28, □35, and □42. The series is divided into four motor compatibility groups, A, B, C, and D. Motors within the same group can replace equivalent products from Taiwanese and Japanese manufacturers, including SANYO, making it easier to balance cost and performance. Key specifications include a rated current of 0.67~1.68A, frame sizes from □28×31.3 to □42×47, a maximum energized holding torque of 0.06~0.44 N·m, and rotor inertia of 0.12×10⁻⁴~0.9×10⁻⁴ kg·m². All models can be paired with optional stepper drives such as the GTR22G-D. They are suitable for small linear modules, dispensing machines, inspection platforms, feeding mechanisms, and other automation applications requiring position holding and high torque at low speeds.

A6 Series Servo Motors

A6 Series Servo Motors

This catalog lists servo motor options labeled as the A6 Series and compares them with the A5 Series. Models explicitly listed as part of the A6 Series include MADLN05SE, MADLN15SE, MBDLN25SE, and MCDLN35SG. A5 Series models (such as MADKT1505E, MBDHT2510E, and MCDKT3520E) are shown only for comparison between the old and new series and are not part of the A6 Series. The models use an alphanumeric coding system similar to Panasonic’s MINAS system. The MADLN/MBDLN/MCDLN prefixes and E/SG suffixes distinguish different capacities and specifications. They are intended for replacement selection in automated conveying and positioning applications, including equipment’s main transmission. The page does not provide detailed specifications such as mounting dimensions, rated power, or speed; it only confirms the model designations and series code for the A6 Series.

AIE100 Series Edge AI Computers

AIE100 Series Edge AI Computers

The AIE100 Series Edge AI Computers are compact embedded systems designed for edge AI applications. The series includes three models: AIE100-903-FL (based on NVIDIA Jetson Nano), AIE100-903-FL-NX (based on Jetson Xavier NX), and AIE100-T2NX (based on Jetson TX2 NX). AI performance ranges from 472 GFLOPS to 21 TOPS and 1.33 TFLOPS to meet the inference requirements of diverse applications. The systems feature quad- or hexa-core ARM processors and NVIDIA Maxwell/Volta/Pascal GPUs, with 4 GB to 16 GB of system memory. I/O includes HDMI, dual Gigabit Ethernet (one port supports PoE), USB 3.x/2.0, and Micro USB. Expansion options include a full-size PCIe Mini Card slot and a SIM slot for adding Wi-Fi/LTE modules. Storage includes 16 GB of onboard eMMC, with an additional M.2 NVMe

AIE100 Series AI Edge Computing Devices

AIE100 Series AI Edge Computing Devices

This series of AI edge computing devices is based on the NVIDIA Jetson Orin platform and includes two models: the AIE100A-ONX (with an integrated Jetson Orin NX) and the AIE100-ONA (with an integrated Jetson Orin Nano, delivering up to 40 TOPS). The compact metal chassis (148.6 x 129.8 x 34.6 mm) supports wall, DIN-rail, and VESA mounting. The front panel provides HDMI display output, Gigabit Ethernet (one port supports PoE), and USB 3.2 Gen 2, USB 2.0, and Micro USB ports. Inside, an M.2 NVMe SSD expansion slot, a full-size PCIe Mini Card slot (for Wi-Fi/LTE modules), and a SIM card slot support wireless connectivity and storage expansion. The device is powered by 12 VDC and has a built-in watchdog. Operating temperatures vary by module: -25°C to +60°C for the Orin NX model or -25°C to +70°C for the Orin Nano model. It is certified to CE, FCC Class A, and UK

AIE110 Series Edge AI Computers

AIE110 Series Edge AI Computers

The AIE110 Series Edge AI Computer is an embedded edge computing device designed for AI applications and built on the NVIDIA Jetson platform. It is available in three performance configurations: AIE110-ONX (Jetson Orin NX, up to 100 TOPS), AIE110-ONA (Jetson Orin Nano, up to 40 TOPS), and AIE110-XNX (Jetson Xavier NX). Its compact, wall-mountable design measures 165 × 117 × 37.7 mm and weighs approximately 0.3 kg. It supports 12 VDC power input and operates in temperatures from -10°C to +60°C. Interfaces and expansion options include one HDMI port, dual Gigabit Ethernet (one with PoE), USB 3.2, USB 2.0, Micro USB, a full-size PCIe Mini Card slot, and a SIM card slot. It also supports M.2 NVMe SSD storage. All three models are CE certified and suited to edge inference, machine vision, smart gateways, and AIoT applications.

AIE900 Series AI Edge Computing Platform

AIE900 Series AI Edge Computing Platform

The AIE900 Series AI Edge Computing Platform is industrial-grade edge AI hardware designed for applications such as smart manufacturing, in-vehicle/mobile robotics, and video and image recognition. The series includes three models: AIE900A-AO, AIE900-902-FL, and AIE900-XXN. They are based on the NVIDIA Jetson AGX Orin (up to 275 TOPS), Jetson AGX Xavier (32 TOPS), and Jetson Xavier NX (21 TOPS) platforms, respectively, and offer options for different Arm CPU and GPU core counts and onboard memory capacities. I/O includes two Gigabit/2.5G Ethernet ports, multiple PoE ports, locking HDMI, USB 3.2/3.1, and RS-232/422/485/CAN serial ports. Expansion options include PCIe Mini Card, M.2 Key B, 5G/LTE, and Nano SIM communication modules. The system supports a wide input voltage range of 9–36 V or 24 VDC and features ignition-controlled power. It operates from -30 to +60°C,

AT-4M Series

AT-4M Series

The AT-4M Series comprises precision cycloidal pinwheel gear reducers with single-stage transmission and a reduction ratio of i=1. Available in nine frame sizes, from AT065 to AT280, the series features hollow-shaft output and is suitable for applications requiring high-precision, high-rigidity transmission, such as robot joints and automation equipment. The dimension table details the mounting dimensions for each frame size, including input and output bore diameters, flange outer diameter, and length.

AT-FL1/AT-FR1 Series

AT-FL1/AT-FR1 Series

This series of precision planetary gearboxes includes two configurations: AT-FL1 (left output shaft) and AT-FR1 (right output shaft). Single-stage models are available with reduction ratios of 1–5, and two-stage models with ratios of 7–50. The range covers several frame sizes (065, 075, 090, 110, 140, 170, 210, 240, and 280) and is designed for servo motor drive. Key features include high precision, high rigidity, and low backlash. The dimensional tables list key specifications for each size, including mounting-hole spacing, shaft diameter, and length. The gearboxes support metric-standard motor adapter plates and are widely used in industrial automation, robotics, machine tools, and other applications.

AT-FR1 Series Right-Angle Gearbox

AT-FR1 Series Right-Angle Gearbox

The AT-FR1 series is a precision planetary gearbox available with either a single output shaft or dual output shafts. Single-stage models have reduction ratios of i=1–5, while two-stage models offer ratios of i=7–50. The series comes in nine frame sizes, from AT065 to AT280, to suit a range of power and mounting requirements. The output shaft is supported by high-precision bearings, delivering low backlash, high rigidity, and high transmission efficiency. Motor mounting plate dimensions comply with metric standards, with optional configurations available to meet customer requirements. The AT-FR1 series is widely used in industrial robots, automation equipment, CNC machine tools, and other applications.

AT-R1 Series

AT-R1 Series

The AT-R1 Series is a precision planetary gearbox with a single-sided output shaft, designed for servo and stepper motor drives. It offers high precision, high rigidity, low noise, and a long service life. This single-stage series has reduction ratios from 1 to 5 and is available in nine frame sizes: 065, 075, 090, 110, 140, 170, 210, 240, and 280. Its mounting flange, output shaft, and other dimensions are symmetrical to those of the AT-L1 Series, meeting single-sided output shaft requirements. It is widely used in automation equipment, robotics, CNC machine tools, and other power transmission applications.

AX92351 Series PCI Express Isolated Digital I/O Cards

AX92351 Series PCI Express Isolated Digital I/O Cards

The AX92351 series of isolated digital I/O cards are industrial digital input/output expansion cards with a PCI Express interface, designed for isolated acquisition and control of digital signals in automation equipment. The series is available in two models with 32 or 64 channels (AX92351-32CH and AX92351-64CH). Digital inputs support both sink and source wiring and feature digital filtering to effectively suppress input signal bounce and noise. Digital outputs support output-state readback, making it easier to diagnose output port status. The cards also support smart interrupts and board ID recognition, helping users quickly identify interrupt sources and channels in systems with multiple cards. The card measures 168 x 107 mm. The 64-channel model includes a 40-pin box-header to 37-pin female cable for convenient field wiring. The order part numbers are E392351104 (32CH) and E392351103 (64CH).

AX92352 Series Encoder Card

AX92352 Series Encoder Card

The AX92352 Series Encoder Card is a two-channel encoder card with a PCI Express x1 interface, designed primarily for machine vision applications such as area and line scanning. It synchronizes multiple external devices via real-time trigger I/O and features two 32-bit quadrature incremental encoder inputs, four trigger inputs, eight isolated digital inputs, and eight isolated digital outputs. It also supports programmable interrupts. Measuring 168 × 100 mm, the card is ideal for industrial automation applications requiring high-speed position feedback and coordination with external triggers. The AX92352-2-CH is the two-channel model in this series equipped with real-time trigger I/O.

AX93 Series Ethernet Modules

AX93 Series Ethernet Modules

The AX93 Series is a product line of Ethernet modules and network interface card (NIC) modules, covering a range of speeds from 1G to 100G: 1G/10G/25G/40G/100G. The modules use Intel Ethernet controllers, including the i350, i210, XL710, 82599ES, XXV710, and E810, and offer 2, 4, or 8 network ports. Optional LAN Bypass (latching relay) functionality supports 0, 1, 2, or 4 bypass channel pairs, making these modules suitable for network security equipment, industrial firewalls, edge computing, and other applications that require bypass during power loss or failures. The 100G models AX93357/AX93358 support 2×100GbE QSFP28 and enhanced networking features with DPDK.

ZPTK110-1 Series Gear Reducer

Output type: hollow-bore output.

KFL130 Series Hollow Rotary Platform

KFL130 Series Hollow Rotary Platform

The product is labeled “Right angle hollow rotating platform” on the page, which also lists hollow rotary platform specifications.

DZ60-L1 Series Right-Angle Gearbox

AGV Series Planetary Gearbox

KFN280 Series Hollow Rotary Platform

KFN280 Series Hollow Rotary Platform

Hollow rotary platform. The page displays product photos, line drawings, dimension drawings, a compatible motor table, and a platform specifications table.

ZKFN85 Series Hollow Rotary Platform

ZKFN85 Series Hollow Rotary Platform

The page is labeled “Hollow Rotary Platform.”

SSX20-120 Series Gear Reducers

SSX20-120 Series Gear Reducers

SSX25–120 Series Gearboxes

SSX25–120 Series Gearboxes

DZ42-L1 Series Right-Angle Gearbox

SSX30–120 Series Gear Reducers

SSX30–120 Series Gear Reducers

ZK110-2 Series Planetary Gearbox

ZZ60-3 Series Planetary Gearbox

KFL225 Series Hollow Rotary Platform

KFL225 Series Hollow Rotary Platform

Hollow rotary platform.

DZS42-L1 Series Right-Angle Gearbox

FKX-330-L2 Series Planetary Gearbox

Compatible motor input interface dimensions (input dimensions are shown on the left).

JV-280-90 Series Technical Specifications

ZPTK70 Series Steering Gearbox + Speed Reducer

Output options: single-shaft output, dual-shaft output, or custom non-standard configurations

JVs-280-90 Series Rotary Platform

JVs-280-90 Series Rotary Platform

Rotary platform bearing: high rigidity, high load capacity, and an integrated output cross-roller bearing.

ZPTK130 Series Right-Angle Gearbox + 60 Reducer

Right-angle gearbox + 60 reducer.

JVS-60-90 Series Rotary Platform

Rotary platform bearing: high rigidity, high load capacity, and an integrated cross-roller bearing at the output.

CEM710/CEM700 Series Embedded Computer-on-Modules

CEM710/CEM700 Series Embedded Computer-on-Modules

The CEM710/CEM700 Series comprises embedded computer-on-modules compliant with the COM Express® Type 7 Basic form factor, featuring an SoC design that integrates the CPU and chipset. The CEM710 features an Intel® Xeon® D-1700 LCC processor, supports DDR4-2666, and offers up to 64 GB of DRAM (128 GB optional). The CEM700 features an Intel® Xeon® D-1500 or Intel® Pentium® D1500 processor, supports DDR4-2400, and offers up to 64 GB of memory. Both models provide an AMI UEFI BIOS, 2 SATA-600 ports, 4 USB 3.0 ports, 4 USB 2.0 ports, COM1/COM2 TX/RX, TPM 2.0, PCIe x16 Gen3, PCIe x8 Gen3, and eight PCIe x1 Gen2 expansion lanes. For networking, the CEM710 provides one 2.5GbE port; the CEM

CEM846 Series Embedded Modular Computers

CEM846 Series Embedded Modular Computers

The CEM846 Series Embedded Modular Computers follow the COM Express Type 10 Mini standard form factor and feature onboard Intel Atom E3845 / E3827 / E3815 processors, with the chipset integrated into the SoC for low overall power consumption. They support DDR3L memory (up to 4 GB) and AMI UEFI BIOS, and integrate 4-in/4-out GPIO, 2 SATA-300 ports, and 2 serial ports. They also provide 8 USB 2.0 ports, 1 USB 3.0 port, 1 LVDS interface, 1 DDI (DisplayPort/HDMI/DVI), Gigabit Ethernet, and 4 PCIe x1 expansion lanes. The operating temperature range is -40°C to +85°C, with relative humidity of 10% to 95% (non-condensing). CE EMC certified, these computers are suitable for demanding applications such as industrial control, embedded systems, and edge computing.

eBOX300 Series Fanless Embedded Systems

eBOX300 Series Fanless Embedded Systems

The eBOX300 Series comprises fanless, wall-mountable industrial embedded systems in three models: eBOX300-500, eBOX300-842, and eBOX300-505C. The eBOX300-500 is built on 6th-generation Intel Core i7/i5/i3 or Celeron/Pentium platforms and supports two DDR4-2133 Long-DIMM memory modules, up to 32 GB. The eBOX300-842 uses a low-power Intel Bay Trail Celeron J1900 SoC and supports up to 8 GB of DDR3L memory and a wide operating temperature range of -20°C to +80°C. Designed for 8th/9th-generation Intel Core/Celeron ULT platforms, the eBOX300-505C supports up to 64 GB of DDR4 memory and adds four PoE Gigabit Ethernet ports. The series generally features multiple COM serial ports, VGA/HDMI/DisplayPort/DVI display outputs, USB 3.0/2.0, PCIe

eBOX671 Series Embedded Industrial Computers

eBOX671 Series Embedded Industrial Computers

The eBOX671 series comprises high-performance embedded industrial computers (box PCs) designed for harsh industrial environments. The series includes three models—eBOX671B, eBOX671A, and eBOX671-521-FL—which support 13th/12th Gen, 10th Gen, and 9th Gen Intel Core/Xeon/Celeron processors, respectively. They feature dual-channel DDR5 or DDR4 memory, with a maximum capacity of 64 GB. All models support wall or DIN-rail mounting and share the same dimensions: 280 × 210 × 80.5 mm. Connectivity includes multiple HDMI/DisplayPort display outputs, Gigabit/2.5G Ethernet (with PoE up to 60 W on select models), multiple USB and serial ports (RS-232/422/485), and expansion slots such as PCIe Mini Card and M.2. The systems support a wide 9–48 VDC input range (including models with ACC ignition input) and operate across a wide temperature range of -40°C to +70°C. They are widely used in in-vehicle computing, machine vision, intelligent transportation, edge computing, and other applications. The systems are certified to CE and FCC Class

JVT Series Hollow Rotary Table Gearbox

JVT Series Hollow Rotary Table Gearbox

The JVT Series Hollow Rotary Table Gearbox is a high-precision, high-rigidity rotary drive designed for applications such as precision positioning in automation equipment, changing load inertia, and optical applications that make use of the hollow bore. Crossed roller bearings provide high rigidity and load capacity, while the adjustable zero-backlash design ensures positioning accuracy of ≤1 arcminute and repeatability of ≤1 arcsecond. Available in a range of sizes, including JVT40, JVT60, JVT85, JVT130, JVT200, JVT280 and JVT465, with reduction ratios such as 5, 10, 15 and 18, the units are compatible with stepper and servo motors. Rated output torque ranges from a few newton-metres to several hundred newton-metres, depending on the model; allowable axial load and overturning moment increase with unit size. IP protection rating: IP. Long-life lubrication, transmission efficiency of up to 95%, and noise level of ≤55 dB. The unit can be installed in any orientation and is suitable for applications including automated production lines, industrial robots and optical instruments.

Horizontal Hollow Rotary Platform Series

Horizontal Hollow Rotary Platform Series

The Horizontal Hollow Rotary Platform Series is a high-precision rotary actuator that can be easily mounted to servo motors from various manufacturers with a simple push-fit connection. It delivers high-precision actuation and features high strength, precision, and rigidity. Used with a servo or stepper motor, it enables indexing at any angle and can replace DD motors and cam indexers. The comprehensive model range accommodates a variety of operating conditions, while its integrated worm-and-wheel design provides high load capacity.

JVRB Series Hollow Rotary Platform

JVRB Series Hollow Rotary Platform

The JVRB Series Hollow Rotary Platform uses crossed roller bearings for high rigidity, precision, and long service life. Its optimized oil seals prevent foreign matter from entering and allow for easy installation. Available in three frame sizes—60 mm, 110 mm, and 150 mm—with reduction ratios of 5 or 10 for the 60 mm model and 10 for the 150 mm model. An optional precision planetary gearbox provides a higher reduction ratio of 50. Technical specifications include positioning accuracy of ≤1 arcmin (JVRB60), ≤1.5 arcmin (JVRB110), and ≤2 arcmin (JVRB150); repeatability of ±5–10 arcsec; allowable torque of 15–80 Nm; allowable axial load of 250–3,500 N; and a service life of 20,000 hours. Suitable for precision-positioning applications such as automated assembly, inspection equipment, CNC indexing tables, and rotary worktables.

JVD Series

JVD Series

The JVD Series is a heavy-duty right-angle hollow rotary platform featuring crossed-roller bearings for high precision, rigidity, and load capacity. It is available in four frame sizes—105, 130, 180, and 225—with each size offered in L1 and L2 specifications featuring different reduction ratios and accuracy grades. The L1 grade offers positioning accuracy of ≤1 arc-min and repeat positioning accuracy of ≤30 arc-sec; L2 offers positioning accuracy of ≤3 arc-min and repeat positioning accuracy of ≤60 arc-sec. Compatible with servo or stepper motors, it has an IP54 protection rating, low noise, and high transmission efficiency (up to 95% for L1). It is suitable for applications requiring precise rotary positioning, including automation equipment, robot joints, machine tools, and rotary tables.

JVR Series

JVR Series

JVR Series precision gear reducers feature a planetary gear reduction design, offering high precision, high rigidity, low noise, and a long service life. Available in three sizes—JVR60, JVR120, and JVR165—all with a 30:1 reduction ratio. Rated output torque ranges from 35 Nm to 440 Nm, and the maximum allowable radial and axial loads are each 18,000 N. With rotational accuracy of ≤1 arcmin and an IP65 protection rating, they are compatible with 100 W to 750 W motors and are suitable for industrial robots, automated production lines, precision positioning equipment, and more.

Heavy-Duty Hollow Rotary Platform JVU Series

Heavy-Duty Hollow Rotary Platform JVU Series

This heavy-duty hollow rotary platform series uses a cam roller and crossed roller bearing structure to deliver high-precision, high-rigidity rotary positioning. It includes two models, JVU 115 and JVU 215, with rated load capacities of up to 500 kg and 1,600 kg, respectively. The maximum outer diameters of the rotary fixtures are 1,200 mm and 2,000 mm, and the reduction ratios are 1:20 and 1:40. Repeatability is ±5 arcsec, and positioning accuracy is ±10 arcsec. The platforms are suitable for applications such as heavy-duty rotary tables and automated production lines. They have an IP40 protection rating, support 80/130/180 servomotors, and are paired with a planetary reducer.

Heavy-Duty Hollow Rotary Platform JVU 315 Series

Heavy-Duty Hollow Rotary Platform JVU 315 Series

The JVU 315 Series heavy-duty hollow rotary platform features a cam roller and crossed roller bearing structure. It has a rated load capacity of ≤2.5 t and supports rotary tooling plates with a maximum outer diameter of ≤2500 mm. The reduction ratio is 1:60, the tilting moment is 14,000 N·m, the allowable input torque is ≤500 N·m, and the rated output torque is ≤30,000 N·m. The allowable input speed is 2,000 r/min. Repeatability is ±5 arcseconds, positioning accuracy is ±10 arcseconds, platform parallelism is 0.02 mm, and concentricity is 0.02 mm. Its precision service life is 20,000 hours under intermittent operation. It is compatible with a 180 servo motor and supports a planetary reducer or servo motor. The protection rating is IP40, and the weight is 200 kg. It is suitable for heavy-duty, high-precision rotary positioning applications, such as large rotary tables and welding positioners.

Heavy-Duty Hollow Rotary Table, JVU 415 Series

Heavy-Duty Hollow Rotary Table, JVU 415 Series

The JVU 415 Series heavy-duty hollow rotary table features a cam roller and crossed roller bearing design, making it suitable for high-load, high-precision rotary applications. Rated load: ≤4.5 t; maximum outer diameter of rotary fixture plate: ≤3000 mm; reduction ratio: 1:60; overturning moment: 30,000 N·m; allowable input torque: ≤500 N·m; rated output torque: ≤30,000 N·m; allowable input speed: 2000 r/min; repeat positioning accuracy: ±5 arc-sec; positioning accuracy: ±10 arc-sec; rotary table parallelism: 0.02 mm; concentricity: 0.02 mm; precision service life: 20,000 h (intermittent operation); protection rating: IP40; compatible with 180 servo motors and planetary gearboxes/servo motors; weight: 300 kg.

JVS Cam Roller Hollow Rotary Table

JVS Cam Roller Hollow Rotary Table

The JVS series cam roller hollow rotary table uses a cam roller drive mechanism for high-precision positioning and rotation. The rotary table has a surface diameter of up to 320 mm and a hollow bore diameter of 55 mm. Positioning accuracy is ±20 arcseconds, maximum vertical load is 15,000 N, maximum radial load is 9,000 N, maximum overturning moment is 1,900 Nm, and maximum tangential moment is 1,000 Nm. It supports both fixed-station and servo-driven positioning. The standard reducer model is KAF47, and the rotary table itself has a reduction ratio of 1:15 or mechanical indexing stations. Product models follow the JVS-XX-90 format, where XX denotes the rotary table surface diameter (such as 60, 85, 130, 200, or 280 mm), while 90 may indicate the reduction ratio or rotation angle. This series features a compact design and high rigidity, making it suitable for precision positioning applications such as automated assembly, robotic end effectors, and CNC rotary tables.

DZ/DZS/DK/DKS Series Right-Angle Gearboxes

DZ/DZS/DK/DKS Series Right-Angle Gearboxes

This series of right-angle gearboxes comprises four subseries: DZ, DZS, DK, and DKS. Compact and space-saving, they use spiral bevel gears to allow the motor to be mounted at a 90-degree angle. They offer high precision, low noise, and high rigidity. Precision-grade models have backlash of less than 1 arcminute for accurate positioning. Precision-engineered transmission gears ensure accurate power transmission, low noise, and high rigidity. A variety of models are available, with rated output torque ranging from 18 to 120 Nm. Maximum output torque is 2.5 times the rated value. Rated input speed is 1,500 rpm, and maximum input speed is 3,000 rpm. Protection ratings of IP40 and IP65 are available, depending on the model. The operating temperature range is -25°C to +90°C, and service life exceeds 20,000 hours. One- or two-stage reduction is available, with reduction ratios including 30, 60, and 90. These gearboxes are widely used in automation equipment, machine tools, packaging machinery, and other applications.

DZS Series Right-Angle Gearbox

DZS Series Right-Angle Gearbox

The DZS Series Right-Angle Gearbox uses spiral bevel gears to turn the motor 90 degrees, saving space. It offers high precision, low noise, and high rigidity. The precision model has backlash of less than 1 arcminute for accurate positioning. Its precision-engineered gears meet demanding standards for accurate transmission, low noise, and high rigidity. With an IP65 protection rating, it is suitable for a wide range of industrial automation applications. Available in multiple sizes, including 42, 60, and 90, it accommodates different power requirements.