Motor

2MS-N Series Two-Phase Stepper Motors
The 2MS-N series consists of two-phase hybrid stepper motors with dual-shaft designs and a uniform step angle of 1.8° (200 full steps per revolution). Three mounting flange sizes are available: □28, □35, and □42. The series is divided into four motor compatibility groups, A, B, C, and D. Motors within the same group can replace equivalent products from Taiwanese and Japanese manufacturers, including SANYO, making it easier to balance cost and performance. Key specifications include a rated current of 0.67~1.68A, frame sizes from □28×31.3 to □42×47, a maximum energized holding torque of 0.06~0.44 N·m, and rotor inertia of 0.12×10⁻⁴~0.9×10⁻⁴ kg·m². All models can be paired with optional stepper drives such as the GTR22G-D. They are suitable for small linear modules, dispensing machines, inspection platforms, feeding mechanisms, and other automation applications requiring position holding and high torque at low speeds.

A6 Series Servo Motors
This catalog lists servo motor options labeled as the A6 Series and compares them with the A5 Series. Models explicitly listed as part of the A6 Series include MADLN05SE, MADLN15SE, MBDLN25SE, and MCDLN35SG. A5 Series models (such as MADKT1505E, MBDHT2510E, and MCDKT3520E) are shown only for comparison between the old and new series and are not part of the A6 Series. The models use an alphanumeric coding system similar to Panasonic’s MINAS system. The MADLN/MBDLN/MCDLN prefixes and E/SG suffixes distinguish different capacities and specifications. They are intended for replacement selection in automated conveying and positioning applications, including equipment’s main transmission. The page does not provide detailed specifications such as mounting dimensions, rated power, or speed; it only confirms the model designations and series code for the A6 Series.

Panasonic A5 Series AC Servo Motors
This page lists models of Panasonic A5 Series AC servo motors, including MADKT1505E, MADKT1507E, MBDHT2510E, MCDKT3520E, MDDKT5540E, and MDDHT3530. The series is commonly used in automated production lines, including the main transport systems of soldering equipment, and works with A5 Series servo drives to form an AC servo drive system. Model codes consist of letters identifying the motor series, numbers indicating the flange and power rating, and suffix codes. When selecting a model, match it to the load power, encoder specifications, and compatible servo drive. A6 Series motors, such as MADLN05SE, MADLN15SE, MBDLN25SE, and MCDLN35SG, are also listed on the same page for comparison and upgrade or replacement reference.

ISMH Series Servo Motors
ISMH Series servo motors are AC servo actuators designed for applications requiring precise speed and position control, including automation equipment, CNC machine tools, packaging machinery, and textile machinery. This catalog page lists several models, including ISMH1-10B30CB, ISMH1-20B30CB, ISMH1-40B30CB, ISMH4-40B30CB, and ISMH1-75B30CB, covering power ratings of 100 W, 200 W, 400 W, and 750 W. ISMH1 and ISMH4 in the model numbers identify different subseries, while suffixes such as B30CB distinguish the encoder, brake, or factory configuration. The catalog page also presents comparison values for the models in a matrix, helping users assess compatible replacements during maintenance and selection. For complete specifications, including rated torque, speed, inertia, flange dimensions, and encoder resolution, consult other pages in this series or the selection software.

PRP Series Two-Phase Stepper Motors
The PRP series comprises two-phase stepper motors with dual output shafts, primarily used to drive factory automation equipment such as linear modules, slides and positioning stages. The series is divided into A/B/C/D groups by motor mounting configuration, each corresponding to different flange sizes and output torque ratings. This makes it easy to match a motor to the load and available installation space when selecting a module. For example, the PRP223D15B2 and PRP225D15B2 both have a 1.8° step angle, a rated current of 1.5A and a flange size of □28mm. Their body lengths are 32mm and 51.5mm, maximum holding torques are 0.095 N·m and 0.19 N·m, and rotor inertias are 0.09×10⁻⁴ and 0.18×10⁻⁴ kg·m², respectively. The GTR22G-D driver is available separately for use with these motors. The same catalog table also lists interchangeable motor options, including the Taiwanese 2MS series, Japanese SH/PKP series, and motors from Oriental Motor and Sanyo Denki, to suit different cost and precision requirements.

PKP Series Two-Phase Stepper Motors
PKP series two-phase stepper motors feature a Japanese-style dual-shaft design and a 1.8° step angle. Available in □35mm and □42mm frame sizes, they have a rated current of 2.3A and maximum holding torques of 0.2N·m and 0.58N·m, respectively. The compatible driver model is GTR22G-D. Designed for precision positioning and motion control in factory automation equipment, they can be used with a variety of linear modules and slides.

CVRD Series Stepper Motors
The CVRD series is a matched system of stepper motors and drivers organized by motor mounting group. The catalog compares compatible stepper motor specifications across four groups: A, B, C, and D. Each group corresponds to a mounting flange size and rated current, covering Taiwanese two-phase stepper motors, Japanese two-phase and five-phase dual-shaft stepper motors, and motors from brands such as Oriental Motor and SANYO. The table lists rated current (0.67A~2.3A), dimensions (□28×31.3 to □42×47, among others), step angle (1.8°, 0.72°, 0.36°), maximum holding torque (0.06~0.58 N·m), rotor inertia, and recommended driver models (such as CVRD215-K, CVRD223-K, CVRD518-K, and GTR22G-D). Users can select a motor and its corresponding group based on mounting dimensions and torque requirements, then choose a CVRD series driver from the same group for a matched motor-and-driver combination.

FR/FX Series Stepper Motors
FR/FX series stepper motors are used for positioning, conveying, and power transmission in factory automation equipment. The catalog organizes motor selection into A/B/C/D groups by mounting classification and lists specifications by motor type/shaft configuration, rated current, external dimensions, step angle, maximum holding torque, rotor inertia, and optional driver models. Models shown include FR, FXN, and FXG types (such as FR39-LND, FXN50100-SBN, and FXG6-35CS), with optional drivers including GTR22G-D, GTR24M3, and CVRD518-K. Refer to the corresponding model table for each model's current, dimensions, step angle, torque, and rotor inertia; OCR misalignment in the table on this page prevents these values from being reliably matched to individual models.

SH Series Two-Phase Stepper Motors
SH series two-phase stepper motors have dual output shafts and are compatible with motor mounting groups A/B/C/D. Common frame sizes include □28, □35, and □42 mm, with rated currents of approximately 0.75~1.5 A and step angles of 0.36°, 0.72°, and 1.8°. Maximum energized holding torque is approximately 0.041~0.37 N·m, and rotor inertia is approximately 1×10⁻⁶~7.4×10⁻⁶ kg·m². Optional drivers include the GTR24M3 and CVRD518-K. These motors are suitable for positioning, feeding, and drive applications in automated equipment.

SANYO 103 Series Stepper Motors
The SANYO 103 series is a family of compact stepper motors for positioning and motion control in factory automation. They are commonly used in linear modules, slides, dispensing machines, and inspection equipment. The catalog groups motors into A/B/C/D mounting categories, lists their compatibility with module-side motor mounts, and provides specifications such as rated current, flange size, step angle, holding torque, and rotor inertia. Models shown include 103H5210-0410, 103-4507-7010, and 103F5510-8211, with flange sizes of approximately 39~42 mm, rated currents of 1.2~1.4 A, step angles of 0.72°/1.8°, holding torques of 0.078~0.37 N·m, and rotor inertias of approximately 0.022×10⁻⁴~0.074×10⁻⁴ kg·m². They can be paired with drivers such as CVRD518-K and GTR24M3. The table also lists Taiwanese, Japanese, and Oriental motor equivalents for comparison; these are not primary models in this series.

HIWIN Servo Motors
The HIWIN servo motor series is designed for use with drive components such as linear modules and single-axis robots. The catalog provides a compatible motor reference table organized by output power: 50W, 100W, 200W, 400W, and 750W. For each rating, it lists the HIWIN motor model (FRLS052, FRLS102, FRLS202, FRLS402, or FRMS752), motor weight, compatible flange code (F0/F1/F2/F3/F4), compatible flange code when a brake is fitted, matching drive and its weight, and voltage rating (110V or 220V). The same table also lists models, weights, and compatible flanges for motors in the same power ranges from international brands such as Mitsubishi (HF-KP series), Panasonic (MSMD series), and Yaskawa. This makes it easy to match power ratings and flange interfaces when changing drive or motor brands. To select a motor, first determine the required power based on the mechanism load, then check the module flange code and whether a brake is needed, and finally match the drive model and supply voltage.

Servo Motors for Linear Modules
This reference table covers servo motors compatible with linear modules from brands including HIWIN, Mitsubishi, Panasonic and Yaskawa, with output power from 50W~750W. Selection information includes compatible flanges, brake options, drive models and weights, and 110V/220V voltage ratings. Select the appropriate motor and drive according to the linear module specifications, ensuring compatibility with the mounting flange and brake configuration. Note that the Yaskawa table duplicates the Panasonic data, possibly due to an OCR error, and is not listed separately.

Servo Motor Flange Compatibility Chart
This page provides a flange compatibility chart for servo motors used with linear modules. Organized by output power (50W, 100W, 200W, 400W, 750W), it lists servo motor models from HIWIN, Mitsubishi, Panasonic and Yaskawa, along with motor weight, compatible flange codes (F0, F1, F2, F3, F4), flange codes and additional weight for motors with brakes, matching driver models and weights, and supply voltages (110V/220V). Users can select a flange code based on motor power and brand, allowing the same linear module to be fitted with servo motors of different brands and power ratings. Note that the models and specifications in the Yaskawa column of the source exactly duplicate those in the Panasonic column, likely due to a catalog layout or copying error. Verify models and weights against the motor manufacturer's documentation when selecting a motor.

MS1H Series Servo Motors
The MS1H series comprises industrial AC servo motors, with power ratings listed on this page including 100 W, 200 W, 400 W, and 750 W. The catalog includes base models without suffixes (such as ISMH1-10B30CB, which may be an OCR variant of MS1H1-10B30CB) as well as complete order numbers with suffixes such as A331Z (for example, MS1H1-20B30CB-A331Z-S), which distinguish configurations such as the encoder, brake, and shaft end. These motors are suitable for applications requiring high-precision positioning and dynamic response, including automation equipment, machine tools, and packaging machinery.