Stepper Motors

2MS-N Series Two-Phase Stepper Motors

2MS-N Series Two-Phase Stepper Motors

The 2MS-N series consists of two-phase hybrid stepper motors with dual-shaft designs and a uniform step angle of 1.8° (200 full steps per revolution). Three mounting flange sizes are available: □28, □35, and □42. The series is divided into four motor compatibility groups, A, B, C, and D. Motors within the same group can replace equivalent products from Taiwanese and Japanese manufacturers, including SANYO, making it easier to balance cost and performance. Key specifications include a rated current of 0.67~1.68A, frame sizes from □28×31.3 to □42×47, a maximum energized holding torque of 0.06~0.44 N·m, and rotor inertia of 0.12×10⁻⁴~0.9×10⁻⁴ kg·m². All models can be paired with optional stepper drives such as the GTR22G-D. They are suitable for small linear modules, dispensing machines, inspection platforms, feeding mechanisms, and other automation applications requiring position holding and high torque at low speeds.

PRP Series Two-Phase Stepper Motors

PRP Series Two-Phase Stepper Motors

The PRP series comprises two-phase stepper motors with dual output shafts, primarily used to drive factory automation equipment such as linear modules, slides and positioning stages. The series is divided into A/B/C/D groups by motor mounting configuration, each corresponding to different flange sizes and output torque ratings. This makes it easy to match a motor to the load and available installation space when selecting a module. For example, the PRP223D15B2 and PRP225D15B2 both have a 1.8° step angle, a rated current of 1.5A and a flange size of □28mm. Their body lengths are 32mm and 51.5mm, maximum holding torques are 0.095 N·m and 0.19 N·m, and rotor inertias are 0.09×10⁻⁴ and 0.18×10⁻⁴ kg·m², respectively. The GTR22G-D driver is available separately for use with these motors. The same catalog table also lists interchangeable motor options, including the Taiwanese 2MS series, Japanese SH/PKP series, and motors from Oriental Motor and Sanyo Denki, to suit different cost and precision requirements.

PKP Series Two-Phase Stepper Motors

PKP Series Two-Phase Stepper Motors

PKP series two-phase stepper motors feature a Japanese-style dual-shaft design and a 1.8° step angle. Available in □35mm and □42mm frame sizes, they have a rated current of 2.3A and maximum holding torques of 0.2N·m and 0.58N·m, respectively. The compatible driver model is GTR22G-D. Designed for precision positioning and motion control in factory automation equipment, they can be used with a variety of linear modules and slides.

CVRD Series Stepper Motors

CVRD Series Stepper Motors

The CVRD series is a matched system of stepper motors and drivers organized by motor mounting group. The catalog compares compatible stepper motor specifications across four groups: A, B, C, and D. Each group corresponds to a mounting flange size and rated current, covering Taiwanese two-phase stepper motors, Japanese two-phase and five-phase dual-shaft stepper motors, and motors from brands such as Oriental Motor and SANYO. The table lists rated current (0.67A~2.3A), dimensions (□28×31.3 to □42×47, among others), step angle (1.8°, 0.72°, 0.36°), maximum holding torque (0.06~0.58 N·m), rotor inertia, and recommended driver models (such as CVRD215-K, CVRD223-K, CVRD518-K, and GTR22G-D). Users can select a motor and its corresponding group based on mounting dimensions and torque requirements, then choose a CVRD series driver from the same group for a matched motor-and-driver combination.

FR/FX Series Stepper Motors

FR/FX Series Stepper Motors

FR/FX series stepper motors are used for positioning, conveying, and power transmission in factory automation equipment. The catalog organizes motor selection into A/B/C/D groups by mounting classification and lists specifications by motor type/shaft configuration, rated current, external dimensions, step angle, maximum holding torque, rotor inertia, and optional driver models. Models shown include FR, FXN, and FXG types (such as FR39-LND, FXN50100-SBN, and FXG6-35CS), with optional drivers including GTR22G-D, GTR24M3, and CVRD518-K. Refer to the corresponding model table for each model's current, dimensions, step angle, torque, and rotor inertia; OCR misalignment in the table on this page prevents these values from being reliably matched to individual models.

SH Series Two-Phase Stepper Motors

SH Series Two-Phase Stepper Motors

SH series two-phase stepper motors have dual output shafts and are compatible with motor mounting groups A/B/C/D. Common frame sizes include □28, □35, and □42 mm, with rated currents of approximately 0.75~1.5 A and step angles of 0.36°, 0.72°, and 1.8°. Maximum energized holding torque is approximately 0.041~0.37 N·m, and rotor inertia is approximately 1×10⁻⁶~7.4×10⁻⁶ kg·m². Optional drivers include the GTR24M3 and CVRD518-K. These motors are suitable for positioning, feeding, and drive applications in automated equipment.

SANYO 103 Series Stepper Motors

SANYO 103 Series Stepper Motors

The SANYO 103 series is a family of compact stepper motors for positioning and motion control in factory automation. They are commonly used in linear modules, slides, dispensing machines, and inspection equipment. The catalog groups motors into A/B/C/D mounting categories, lists their compatibility with module-side motor mounts, and provides specifications such as rated current, flange size, step angle, holding torque, and rotor inertia. Models shown include 103H5210-0410, 103-4507-7010, and 103F5510-8211, with flange sizes of approximately 39~42 mm, rated currents of 1.2~1.4 A, step angles of 0.72°/1.8°, holding torques of 0.078~0.37 N·m, and rotor inertias of approximately 0.022×10⁻⁴~0.074×10⁻⁴ kg·m². They can be paired with drivers such as CVRD518-K and GTR24M3. The table also lists Taiwanese, Japanese, and Oriental motor equivalents for comparison; these are not primary models in this series.