Cable Ties, Wire Clips, Wire Marking Machines & Consumables

XYPL Series Snap-In Cable Clips

XYPL Series Snap-In Cable Clips

These snap-in cable clips are made of ABS or PA6, are black, and are designed for securing cables. The product range includes several models: XYLS011, XYLS012, XYLS023, XYLS024, and XYLS025 (ABS), as well as XYPL027 (PA6). The XYLS031 series is available in the following specifications: XYLS031-1 (L1=80 mm, W2=48.5 mm, weight 28.5 g), XYLS031-2 (L1=120 mm, W2=70 mm, weight 58.5 g), and XYLS031-3 (L1=180 mm, W2=70 mm, weight 85.2 g). Packing quantities range from 200 to 500 pieces. All models use snap-in installation.

CableFix CFX Series Cable Clamps

CableFix CFX Series Cable Clamps

CableFix CFX series cable clamps secure the ends of cables and hoses. They can be mounted on the C-slot of an MFB connector or used with accessories such as cable tie plates. Available in carbon steel or stainless steel for different operating conditions, their stackable design secures 1, 2, or 3 cables. With a tightening torque of 1.5N·m and high clamping force, they are suitable for highly dynamic applications. Sizes range from Φ6-12 to Φ38-42 mm by cable outer diameter. Single-, double-, and triple-layer models are designated CFXxx.1, CFXxx.2, and CFXxx.3, respectively; stainless steel models have .S appended to the code. When selecting a clamp, consider the cable diameter, B width, and H height. H is the approximate height when the largest cable is installed.

ZA Series Cable Tie Plates

ZA Series Cable Tie Plates

The ZA series cable tie plate is a robust, corrosion-resistant engineering plastic accessory for securing cable and hose ends. Its reinforced rib design helps reduce cable and hose movement, providing a simple, economical strain relief solution with medium holding force. The product supports three mounting methods: it can be bolted to the C-slot of an MFB connector or mounted separately outside the cable carrier. The series includes 6 sizes, from ZA050 to ZA175, with 5 to 17 teeth, dimension A from 55 to 180 mm, and dimension B from 30 to 155 mm, accommodating a range of cable bundle securing requirements.