Connectors

XYHK-J Series Hook Support

XYHK-J Series Hook Support

XYCL132-2 Series L-Type Dust-Free Hinge

XYCL132-2 Series L-Type Dust-Free Hinge

XYHFZ27-65 Series Connectors

XYHFZ27-65 Series Connectors

XYCL132-3 Series L-Shaped Screwless Hinge

PTC Precision Toothed Screw

PTC Precision Toothed Screw

XYHK-T Series Precision Castings

XYHK-T Series Precision Castings

Precision Castings

YXL14X8 Series Handle

YXL14X8 Series Handle

Material: 304 stainless steel; available surface finishes: brushed and mirror.

XYAC Series

XYAC Series

XYAC series aluminum alloy connectors are available in three models: XYAC26, XYAC29, and XYAC36, and six lengths: 80, 100, 125, 160, 200, and 250 mm. Made of aluminum alloy, the products have a silver or black painted finish, depending on the model. Dimensions include overall length L, mounting distance L1, height H, center distance A, slot width B, hole spacing h, and threaded hole M. They are suitable for connections and support in automation equipment. Rated static and dynamic load capacities are not provided, but standard mounting holes make integration easy.

XYHK Series Stainless Steel Barrel-Polished Fittings

XYHK Series Stainless Steel Barrel-Polished Fittings

This series consists of connectors made from SUS304 stainless steel with a barrel-polished finish. The T-type weighs approximately 43.69 g per piece, and each carton contains 200 pieces. The T-type and C-type are different specifications, but use the same material and finish.

XYHK-C Series

XYHK-C Series

XYHK-C Series products are made of SUS304 stainless steel and feature a polished surface finish. Each carton contains 200 pieces. Suitable for industrial automation and other applications, they offer good corrosion resistance and a smooth surface finish.

LFZA Series Motor Input Interface Adapter

LFZA Series Motor Input Interface Adapter

The LFZA series adapters are designed for servo motor input interfaces. They are available in several sizes (060/090/115/140/180) and two mounting configurations: single slide (L1) and dual slide (L2). The C1–C8 dimensional parameter table lists the motor interface dimensions compatible with each model, including key measurements such as mounting hole spacing, center hole diameter, and flange outer diameter. The adapters suit a range of motor interface standards, including center holes from Φ14 to Φ42 and threaded holes from M4 to M12.

LFZH Series Motor Input Interface Adapters

LFZH Series Motor Input Interface Adapters

LFZH Series Motor Input Interface Adapters connect motors to mechanical equipment. Available in single-stage (L1) and double-stage (L2) versions to suit different installation requirements, the range includes four basic models: LFZH090, LFZH110, LFZH140, and LFZH200. Each model offers a variety of flange interface combinations (sizes C1–C8) to accommodate different motor flange outer diameters, mounting threads, shaft diameters, and more. Highly reliable and interchangeable, these adapters are widely used in automation equipment, machine tools, robotics, and other fields.

FKH Series

FKH Series

FKH series planetary gearboxes are designed for servo motors and are available in a range of flange sizes (064, 090, 110, 140) and lengths (L1, L2) to suit different motor interfaces. Precision manufacturing ensures smooth, quiet operation. They are widely used in automation equipment, machine tools, robotics, and other applications. The table lists the mounting dimensions (C1–C8) for each model to help customers select or replace a unit.

FKD Series Motor Connection Flanges

FKD Series Motor Connection Flanges

FKD Series motor connection flanges connect servo motors to loads or gearboxes and are available in a range of sizes and interface configurations. The series includes several models, such as FKD-042, FKD-060, FKD-090, FKD-115, and FKD-142, each available in two lengths: L1 and L2. The flanges offer multiple input dimensions (C1 to C8) to suit the mounting holes and shaft diameters of different motors. They are suitable for automation equipment, robots, CNC machine tools, and other applications, providing reliable connection and positioning.

FKF Series Motor Interface Adapters

FKF Series Motor Interface Adapters

The FKF series adapts to motor input interface dimensions and is available in several models, including FKF-060-L1, FKF-060-L2, FKF-090-L1, FKF-120-L1, FKF-120-L2, and FKF-160-L1, to suit different motor mounting dimensions. The table lists interface parameters C1 through C8, including mounting hole spacing, hole diameter, and boss diameter, ensuring precise connection between the motor and the equipment. With a modular design, this series is widely used for motor drive connections in automation equipment.

FKX Series Motor Interface Adapters

FKX Series Motor Interface Adapters

FKX series motor input interface adapters connect motors to loads and are available in various flange sizes and shaft bore specifications. The range includes two main models, FKX-142 and FKX-190, each available in two lengths, L1 and L2. They accommodate different motor interfaces (such as Φ130, Φ145, Φ165, Φ200, and Φ215), with mounting hole positions and depths varying by model. C1 indicates the adapter flange outer diameter; C2, the number and specifications of bolt holes; C3, the input shaft bore diameter; C4, the shaft extension length; C5, the mounting face outer diameter; C6, the keyway width (where applicable); C7, the adapter thickness; and C8, the overall length. Suitable for a range of standard motor interfaces, these adapters are common drive connection components in automation equipment.

MPM Series Threaded Connection Accessories

MPM Series Threaded Connection Accessories

The MPM series consists of connection accessories with fine-pitch external threads. Five sizes are available by bore (mating) diameter D: MPM08, MPM10, MPM12, MPM14 and MPM16, with M16×1, M17×1, M20×1, M22×1 and M24×1 fine-pitch external threads, respectively. The dimensions are defined by bore diameter D (8~16 mm), outer sleeve diameter D1 (always D+5.5 mm), overall length L (41.5~64.5 mm), threaded section length L1 (20~24.5 mm) and hex width across flats H (19~27 mm). Overall size increases with D. The bore accommodates a shaft or rod of the corresponding diameter, while the fine-pitch thread secures the accessory to the mating component. The hex section H provides a wrench grip. These accessories are suitable for threaded transitions and fastening where installation space is limited. Smaller MPL sizes (MPL04-M5 and MPL06) are also available for smaller rod diameters. To select a model, first determine D from the rod diameter, then select M and L1 to match the mating thread, and finally check that L fits the available space.

MBV Series Small Connection Accessories

MBV Series Small Connection Accessories

The MBV series comprises small connection accessories for factory automation equipment. It is available in seven nominal sizes: MBV04, MBV06, MBV08, MBV10, MBV12, MBV14, and MBV16, with nominal diameters D of 4, 6, 8, 10, 12, 14, and 16 mm, respectively. Dimensions generally increase with the size designation: overall length L ranges from 15 mm for MBV04 to 34 mm for MBV16, while mounting height H1 ranges from 8 mm to 22 mm. Note that MBV10 and MBV12 both have an L of 23.5 mm, but their H1 values are 13 mm and 15 mm, respectively. To select a model, first determine the MBV size based on the nominal diameter or thread size of the mating component, then check that overall length L and height H1 meet the available mounting space and travel requirements. When multiple accessories are used on the same equipment, ensure consistent H1 values to maintain coaxial alignment during assembly. Common materials include zinc-plated carbon steel and stainless steel, suitable for connection and mounting needs in general industrial environments.

PTB4 Series Connectors

PTB4 Series Connectors

The PTB4 series comprises high-precision connectors designed for fastening and positioning in automation equipment. Available in a range of specifications, it offers A dimensions from 14.5 mm to 90.6 mm and threaded holes from M6 to M16. Mounting dimensions (C/D/E) vary by model. Lightweight and compact, these connectors are ideal for space-constrained applications. Model numbers begin with PTB4- followed by a four-digit code indicating different dimensional combinations.

XYAC29 Series Connectors

XYAC29 Series Connectors

The XYAC29 series consists of aluminum alloy connectors available in a range of lengths (80 mm, 100 mm, 125 mm, 160 mm, 200 mm, and 250 mm), with fixed mounting-hole spacing (H = 40 mm, A = 12 mm, B = 8 mm, h = 13 mm, M = 5 mm). Suitable for connecting and positioning industrial aluminum profile frames.

XYFV02 Series Flat Type, Round Holes, Economy

XYFV02 Series Flat Type, Round Holes, Economy

XYFV02 series flat-type parts with round holes are made of SPCC steel and feature an economical design. They are suitable for light-duty connections or positioning applications. Available with 4-hole or 6-hole mounting. Dimensions: A 40–113 mm, B 35–80 mm, H 25–43 mm; thickness T 9 mm. Mounting hole diameters: d = 2 mm, d1 = 5.5 mm. Number of sections: 5 or 4. Load range: 4–30 kg. Approximate weight: 0.035–0.32 kg/pc. Surface treatment not specified.

XYHS41 Series Plug-In Type

XYHS41 Series Plug-In Type

This series of plug-in connectors is made of SUS304 stainless steel. Surface finishes include brushed, mirror-polished, and electropolished options. The range includes multiple models, such as the left- and right-hand XYK207-2 and XYK207-3, with different overall dimensions and mounting-hole spacing. They are suitable for quick-connect applications in industrial automation, machinery, and other fields.

XYK104-3 Stainless Steel Polished Part

XYK104-3 Stainless Steel Polished Part

The XYK104-3 is an industrial hardware component made from SUS304 stainless steel and finished with a polished surface. It is suitable for applications requiring high corrosion resistance and a smooth finish, such as food-processing machinery, medical equipment, and chemical-processing equipment. Product dimensions include 165 mm, 58 mm, and 61 mm; please refer to the dimensional drawing for exact specifications.

XYK106 Series Polished Stainless Steel Parts

XYK106 Series Polished Stainless Steel Parts

XYK106 Series Polished Stainless Steel Parts are made from SUS304 stainless steel and feature a polished surface for good corrosion resistance and an attractive appearance. Each part weighs approximately 181 g, with 48 pieces per carton. Suitable for a wide range of industrial assembly and fastening applications.

XYK615-2 Series

XYK615-2 Series

The XYK615-2 series is an industrial automation component made of SUS304 stainless steel and polished to create a smooth, attractive finish. Each unit weighs 441.9 g, with 24 pieces per box. It is suitable for applications requiring high corrosion resistance and an appealing appearance, such as connectors or fasteners in automation equipment.

XYZL061 Series

XYZL061 Series

The XYZL061 Series comprises precision connectors made of SUS304 stainless steel with a polished finish, suitable for clean environments. The series is available in three sizes: XYZL061-1C, XYZL061-2C, and XYZL061-3C. Dimensions include lengths L1 and L2; widths W1 and W2; mounting-hole diameters D1, D2, d1, and d2; thickness T; and height H. Depending on the model, the weight ranges from 93.3 g to 231.4 g, with 80 to 160 pcs per carton. These corrosion-resistant connectors feature a smooth surface and are commonly used for hinged or fixed connections in automation equipment, food-processing machinery, and medical equipment.