Switch

CM3PMS Mushroom Pushbutton Assemblies
The CM3PMS series consists of mushroom pushbutton assemblies with an explosion-proof cover (protective cover). Each assembly is supplied complete with a mushroom-head actuator, protective cover, and matching contacts and mounting components. These assemblies are commonly used for equipment emergency stops, fault resets, and industrial control panels where accidental operation must be prevented. The large mushroom head allows quick activation in an emergency, while the cover helps prevent unintended operation caused by dust, oil, or accidental contact. The series is available in green, red, black, yellow, and other panel indicator colors for functions such as start, stop/emergency stop, and reset. Products are ordered as complete assemblies using the “CM3PM06-P××” order number. The suffix identifies the color and structural configuration, with numerous variants listed, including P1~P62. Select the order number for the required color; no separate assembly of components is needed.

HFS Series Water Flow Switches
HFS series water flow switches (paddle/target-type flow switches) monitor water flow and provide interlock protection in air conditioning units, chillers, water pumps, and industrial water circulation systems. An internal single-pole double-throw (SPDT) microswitch uses a balancing spring and a moving paddle to detect liquid flow in the pipe. When the flow reaches the setpoint, the contacts actuate and provide an on/off signal for water loss protection, freeze protection, and coordinated pump control. The switches are suitable for non-corrosive liquids at pressures below 1.0MPa, ambient temperatures of 0~60℃, and liquid temperatures up to 100℃. The electrical rating is 220VAC 15A, with screw terminals and a 1/2″ cable outlet in the plastic housing. Three connection thread sizes are available: HFS-15 (PT1/2), HFS-20 (PT3/4), and HFS-25 (PT1). An adjustment screw on the housing allows the actuation flow rate to be fine-tuned on site.

M3 Series Control Head Assemblies
M3 series control head assemblies are replaceable operating heads for use with M5 series switches. They are available in roller plunger, one-way roller plunger, short lever, and long lever types. The control section is made of engineering plastic and aluminum alloy and is intended for manual operation; do not strike it with metal objects. Some switch bodies reset automatically, while the M5Y, M5HS, and M5PL require manual reset. Once the M5PL is latched, its knob must be turned to reset it. The M5L one-way roller switch can only be actuated in one direction (struck from right to left); impact in the opposite direction has no effect. During use, ensure that the reversing travel does not exceed the specified range to avoid damaging the switch. The control head assembly can be opened separately; see the dimensional specifications for details. Order codes include M3R05-P14A, M3R10-P14A, M3L05-P14A, M3L10-P14A, M3D210-P13A, and M3C210-P13A.

M5 Series Limit Switches
M5 series limit switches feature a modular control head assembly that can be removed and replaced independently. The switch body supports two mounting methods: body mounting and raised plate mounting. The control components are made of engineering plastic and aluminum alloy and must be operated manually; do not actuate them by striking them with metal. Models are classified by reset method as automatic reset (M5B, M5C, M5D, M5PM, M5PF, M5PP) or manual reset (M5Y, M5HS, M5PL). Once the M5PL is latched, its knob must be turned to reset it. The M5L is a one-way roller switch that actuates only when struck from right to left; actuation in the opposite direction is ineffective. Control heads include R/L roller plunger, D short-lever, and C long-lever types, with respective order codes M3R05-P14A, M3R10-P14A, M3L05-P14A, M3L10-P14A, M3D210-P13A, and M3C210-P13A, compatible with M5R, M5L, M5D, and M5C bodies respectively. When an external force causes the switch to disengage, the changeover travel must not exceed the range specified in the control travel table, or the switch may be damaged.