Cable Sheaths

JH Series Sheaths

JH Series Sheaths

JH series sheaths are openable protective covers for cables and moving components in machinery, made from 1.4 mm thick sheet material. They are available in three designs: standard sheaths (material code JH.05, inner widths of 40/62 mm and large 1P versions with inner widths of 82/108/140 mm), single-side opening sheaths (JH.07, inner widths of 31/41/62/80/108 mm), and full-side opening sheaths (JH.08, inner widths of 28/50 mm). For a given inner width, the total width can be increased using 1P/2P/3P stacked-panel configurations, with total widths ranging from 48~150 mm to suit different opening sizes and wrapping layer requirements. All sheaths in the series are 1.4 mm thick, with a flat profile and an openable slit. They can be snapped into place or wrapped around the component being protected. In addition to the standard sizes listed in the table, inner widths, total widths, and opening styles can be customized to drawings. They are widely used to protect cables and shield moving components such as linear modules, guide rails, and lead screws from dust and debris. To select a model, first determine the opening style (standard/single-side opening/full-side opening), then select the material code according to the inner width and P count.

M Series Conduits

M Series Conduits

M Series conduits protect cables in factory automation applications. They fall into two categories: cable protection conduits (nylon, plastic-coated and explosion-proof conduits) and dust extraction hoses (standard and crystal reinforced hoses). They provide effective protection for machine cables, oil lines, air lines and more. The ROHRflex-PA 6-S featured on this page is a split nylon conduit with high flexibility, excellent bending characteristics, flame resistance, resistance to oil, acids and corrosion, and a glossy surface. Its operating temperature range is -50℃~115℃. It offers high resilience, tear resistance, flame retardancy and a nanoscale anti-fouling coating. Sizes are identified by AD outer diameter codes, with 8 sizes from AD10.0~AD54.5, inner diameters of 6.5~48.0mm, outer diameters of 10.5~54.5mm, bending radii of 15~80mm, and a pack unit of 50m.