Pneumatic Angle Seat Valves

JZF-B Series All-Stainless Steel Threaded Angle Seat Valve

Pneumatic Angle Seat Valve
The pneumatic angle seat valve is driven by a pneumatic actuator and is suitable for on/off control of gases, liquids, steam and other media. Nominal sizes range from DN15~DN65, connection threads from G1/2″~G2 1/2″, and actuator sizes include 50, 63, 80 and 100. Valve body lengths vary by material, such as polyurea PA or aluminum alloy. Two flow directions, A and B, are available. Direction A can extend service life and is suitable for liquids. Direction B provides better sealing with steam or gas, but prolonged contact between the U-shaped seal and the medium can reduce service life. Select a single-acting or double-acting actuator according to the nominal size and pressure. For example, a double-acting actuator is required for direction A in sizes 15/20/25 when pressure exceeds 0.3MPa.

Stainless Steel Threaded Angle Seat Valve
The stainless steel threaded angle seat valve (pneumatic angle seat valve) features a stainless steel body and threaded connections. A pneumatic cylinder actuator moves the valve stem linearly to control shutoff and flow of media such as water, steam, oil, and gas in pipelines. It is commonly used in automated fluid control systems. The catalog covers nominal sizes from 15~100 mm, with small-head and large-head configurations available for sizes 25 and 50. The air supply port is G1/4\" (G1/8\" for the new stainless steel threaded model), with φ50, φ63, φ80, φ100, or φ125 cylinder actuators. Overall dimensions range from L 67~230 mm, A 172~420 mm, and H 147~395 mm; thread size D ranges from 1/2\" to 4\". For the same nominal size, the large-head configuration has a larger actuator and a greater overall height. Consider flow requirements and installation space when selecting a model. The plastic-head and new stainless steel models have different installation lengths and air supply port locations; specify the head type, nominal size, and actuator size when ordering.

Threaded Angle Seat Valve with Plastic Actuator Head
The plastic-head/stainless steel threaded angle seat valve is a pneumatically controlled angle-type shutoff valve. The plastic-head version features an engineering-plastic actuator head and a threaded valve body, while the new version has a stainless steel valve body. Threaded connections range from 1/2″ to 4″ in column D, with nominal sizes of 15, 20, 25 (small/large head), 32, 40, 50 (small/large head), 65, 80, and 100 mm. The single-acting pneumatic piston actuator is available in five sizes: φ50, φ63, φ80, φ100, and φ125. The air supply port is G1/4″ on the plastic-head version and G1/8″ on the new stainless steel version. The dimension table provides installation dimensions including L (body length), A (overall height), H (centerline height), and E (actuator connection height) to facilitate piping layout and selection. The valve is suitable for shutoff and flow control of neutral media such as water, steam, and oils.