Single-axis robot module selection: filter by mounting orientation, load, speed, and stroke

Define the operating conditions first, then check the model specifications

First, outline the actual motion requirements: whether the module will be mounted horizontally or vertically, the load of the moving components and workpiece, the required speed, the effective stroke, and the positioning accuracy requirements. Do not select a model based on a single maximum value; figures such as speed and load in product documentation may apply to different leads or operating conditions and should be checked individually. The PLTH80 uses ball-screw transmission. See the product detail page for specific models, drawings, and specifications.

Reference information

Compare load ratings by mounting orientation

First distinguish between horizontal and vertical mounting, then compare the load ratings for the relevant orientation. The PLTH80 documentation specifies a maximum horizontal payload of 50 kg (with a 5 mm lead) and a maximum vertical payload of 25 kg. These figures apply to different mounting orientations, and the horizontal load rating is also explicitly limited to a particular lead. They should not be treated as achievable values for every lead and mounting configuration. Check the complete specifications and actual operating conditions when selecting a model.

Evaluate lead and speed in the context of the load conditions

The PLTH80 is available with three lead options: 5, 10, and 20 mm. Its confirmed maximum speed is 1000 mm/s, with a 20 mm lead. The maximum horizontal load of 50 kg applies to a 5 mm lead. These figures represent performance limits for different leads and do not establish actual performance for any particular combination of load, speed, and mounting orientation. First determine the target speed based on the motion cycle, then consult the product specifications for the corresponding lead and operating conditions.

Check application requirements against stroke and repeatability

Determine the stroke based on the actual travel distance required by the equipment, and verify that the selected model covers it. In the PLTH80 coding example PLTH80-L10-100-BC-M20B-C4-0001, L10 means a 10 mm lead and 100 means a 100 mm stroke; this is a coding example and does not represent every configuration. The series documentation lists repeatability as ±0.01 mm. If the positioning requirement is close to this figure, confirm the specific model and operating conditions. The product code also includes options such as the motor, so refer to the product detail page specifications before ordering.

Cable management can be planned as a separate supporting design consideration

In addition to the module's motion requirements, plan the cable carrier and internal space dividers according to the cable routing and range of motion. WSLG.02 is a heavy-duty skeleton system among the cable carrier accessories. The documentation states that it is intended for cleanroom cable carrier applications and is suitable for light-load, short-stroke conditions; the related specification record refers to the WWC.28.65 cable carrier. It may be considered as an extension of the cable management solution, but the available information does not confirm precise compatibility or installation compatibility between WSLG.02 and PLTH80. Check the details for each product separately before selecting.

Related product information

WSLG.02 Series Cable Carrier Accessories: See the product detail page for models, drawings, and specifications.

PLTH80 Series Single-Axis Robot: See the product detail page for models, drawings, and specifications.

Back to articles