Model · DGHS
DGHS Series Alloy Oldham Coupling, Short Clamping Type
Structural Features: The hubs are made of high-strength aluminum alloy. The slider is made of imported PA6, offering good wear resistance, corrosion resistance, and electrical insulation. The sliding design more effectively compensates for radial and angular misalignment. The removable design makes installation easy. Secured with clamping screws.
- Type
- 短型夹紧式
- Material
- 高强度铝合金
- Surface Treatment
- 阳极氧化
- Accessories
- 紧固螺钉
Overview
Structural Features: The hubs are made of high-strength aluminum alloy. The slider is made of imported PA6, offering good wear resistance, corrosion resistance, and electrical insulation. The sliding design more effectively compensates for radial and angular misalignment. The removable design makes installation easy. Secured with clamping screws.
Ordering Rules
Selection Example: Refer to the selection steps to choose the type and parameters when placing an order. To add a keyway, append K after the bore diameter; for a hexagonal bore, append F; for a square bore, append S; for a splined bore, append H. Refer to the instructions for other bore configurations.

| Model | Type | Material | Surface Treatment | Accessories |
|---|---|---|---|---|
| DGHS | 短型夹紧式 | 高强度铝合金 | 阳极氧化 | 紧固螺钉 |
The standard surface treatment is used by default. Non-standard customizations and special-material customizations are available to meet special operating requirements (please contact customer service for details on special customizations).




Models & specifications
| Model and Specifications | Outside Diameter D | Length L | Bore d1 | Bore d2 |
|---|---|---|---|---|
| DGHS-12×14.9×3 | 12 | 14.9 | 3 | 3 |
Selection Example: Refer to the selection steps to choose the type and parameters when placing an order. Note: To add a keyway, append K after the bore diameter; for a hexagonal bore, append F; for a square bore, append S; for a splined bore, append H. Refer to the instructions for other bore configurations.
| Model | Common d1, d2 Bore Diameters | D | L | LF | LP | F | M | Fastening Screw Torque (N.m) |
|---|---|---|---|---|---|---|---|---|
| DGHS-12×14.9 | 3, 4, 5 | 12 | 14.9 | 7.3 | 4.9 | 2.5 | M2 | 0.45 |
| DGHS-16×21 | 4, 5, 6, 6.35 | 16 | 21 | 10.5 | 6 | 3 | M2.5 | 1 |
| DGHS-20×22.1 | 5, 6, 6.35, 7, 8 | 20 | 22.1 | 11 | 6.6 | 3 | M2.5 | 1 |
| DGHS-25×27.2 | 5, 6, 6.35, 8, 9.9, 9.525, 10, 11, 12 | 25 | 27.2 | 12.8 | 8.5 | 4 | M3 | 1.5 |
| DGHS-32×33.3 | 5, 6, 8, 9.9, 9.525, 10, 11, 12, 12.7, 14, 15, 16 | 32 | 33.3 | 16.1 | 11 | 5 | M4 | 3.5 |
The bore diameters at the two ends of the coupling can be freely selected, from smaller to larger, and the bores are machined to the H7/H8 standard tolerance. The bore diameters listed in the table are for reference only. Non-standard custom sizes can be manufactured to meet specific user requirements; please contact a sales representative or technical specialist for details.
| Model | Rated Torque (N.m) | Permissible Misalignment (mm) | Permissible Angular Misalignment (°) | Permissible Axial Misalignment (mm) | Permissible Speed (rpm) | Static Torsional Stiffness (N.m/rad) | Moment of Inertia (N.m) | Weight (g) |
|---|---|---|---|---|---|---|---|---|
| DGHS-12×14.9 | 0.5 | 0.6 | 2 | ±0.2 | 1200 | 9 | 7.1×10^-8 | 3 |
| DGHS-16×21 | 0.7 | 1 | 2 | ±0.2 | 9000 | 30 | 3.0×10^-7 | 8 |
| DGHS-20×22.1 | 1.2 | 1.3 | 2 | ±0.2 | 6500 | 47 | 7.4×10^-7 | 13 |
| DGHS-25×27.2 | 2 | 1.5 | 2 | ±0.2 | 5500 | 85 | 2.2×10^-6 | 24 |
| DGHS-32×33.3 | 4.5 | 2 | 2 | ±0.2 | 4500 | 190 | 7.3×10^-6 | 48 |
Specifications
| Parameter | Value | Unit |
|---|---|---|
| Type | 短型夹紧式 | |
| Material | 高强度铝合金 | |
| Surface Treatment | 阳极氧化 | |
| Accessories | 紧固螺钉 |


