Model · DHC

DHC Series Aluminum Alloy Clamp-Type Oldham Couplings

The sleeves are made of high-strength aluminum alloy. The elastomer is made of imported PA66, offering excellent wear resistance, corrosion resistance, and electrical insulation. The sliding design more effectively compensates for radial and angular misalignment. The detachable design makes installation easy. Secured with clamping screws.

Type
夹紧式+滑槽型
Material
高强度铝合金
Surface Treatment
阳极氧化
Accessories
紧固螺钉

Overview

The sleeves are made of high-strength aluminum alloy. The elastomer is made of imported PA66, offering excellent wear resistance, corrosion resistance, and electrical insulation. The sliding design more effectively compensates for radial and angular misalignment. The detachable design makes installation easy. Secured with clamping screws.

Ordering Instructions

Selection example: Follow the selection steps to choose the type and specifications for your order. Note: To add a keyway, append K after the bore size; for a hex bore, append F; for a square bore, append S; for a keyed sleeve, append H. Refer to the notes for other configurations.

DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Dimension drawing
DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Dimension drawing
DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Dimension drawing
ModelTypeMaterialSurface TreatmentAccessories
DHC夹紧式+滑槽型高强度铝合金阳极氧化紧固螺钉

Standard surface treatments are used by default. Custom non-standard designs and special materials are available to meet the requirements of special operating conditions (please contact customer service for details on custom orders).

DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Selection specifications
DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Selection specifications
DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Selection specifications
DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Selection specifications
DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Selection specifications
DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Selection specifications
DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Selection specifications

Models & specifications

ModelCommon d1 and d2 bore sizesDLLFLPFMTightening Screw Torque (N.m)
DHC-16×294-5-6-6.35162912.5123M2.51
DHC-20×335-6-6.35-7-8203314.112.73.8M2.51
DHC-25×395-6-6.35-8-9.525-10-11-12253916.917.73.9M31.5
DHC-32×455-6-8-9.9-9.525-10-11-12-12.7-14-15-16324520204.5M43.5
DHC-40×508-9-9.525-10-11-12-14-15-16-17-18-1940502320.35.5M58
DHC-44×468-9-9.525-10-11-12-14-15-16-17-18-19-20-22444620.718.47M58
DHC-50×5310-11-12-7-14-15-16-17-18-19-20-22-24505324.222.357.5M613
DHC-50×5810-11-12-7-14-15-16-17-18-19-20-24505826.522.356.3M613
DHC-55×5710-11-12-7-14-15-16-17-18-19-20-24-25-22555731176.3M613
DHC-63×7114-15-16-17-18-19-20-22-24-25-28-30-32637132.826.27.8M828
DHC-70×7714-15-16-17-18-19-20-22-24-25-28-30-32-35-3870773225.07.7M828

The bore sizes at the two ends of the coupling can be freely combined, from smaller to larger diameters. The bores are machined to standard H7/H8 tolerances. Bore sizes shown in the table are for reference only. Non-standard products are made to the user's specific requirements. Please contact your sales representative or technical staff for details.

ModelRated Torque (N.m)Allowable Misalignment (mm)Allowable Angular Misalignment (°)Allowable Axial Misalignment (mm)Maximum Speed (rpm)Static Torsional Stiffness (N.m/rad)Moment of InertiaWeight (g)
DHC-16×290.70.83±0.2900303.5×10⁻⁷12
DHC-20×331.21.23±0.2700581.5×10⁻⁶19
DHC-25×3921.63±0.26001303.2×10⁻⁶35
DHC-32×454.523±0.24802701.5×10⁻⁵67
DHC-40×5092.43±0.23605204.2×10⁻⁵114
DHC-44×46122.53±0.23508004.5×10⁻⁵140
DHC-50×53192.63±0.23008001.0×10⁻⁴190
DHC-50×581933±0.23008001.1×10⁻⁴215
DHC-55×57253.23±0.23009001.3×10⁻⁴260
DHC-63×713333±0.225012003.5×10⁻⁴455
DHC-70×77563.53±0.225012604.1×10⁻⁴520

Specifications

ParameterValueUnit
Type夹紧式+滑槽型
Material高强度铝合金
Surface Treatment阳极氧化
Accessories紧固螺钉

Dimensions & drawings

DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Dimension drawing
DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Dimension drawing
DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Dimension drawing
DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Dimension drawing
DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Dimension drawing
DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Dimension drawing

Additional information

DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Product image
DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Product image
DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Product image
DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Product image

Original catalogs

DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Catalog page
DHC Series Aluminum Alloy Clamp-Type Oldham Couplings — Catalog page