Model · DESJG
DESJG Series Aluminum Alloy Single-Diaphragm Set-Screw Type
The hubs are made of high-strength aluminum alloy. The diaphragm is made of 304 stainless steel. High torsional rigidity enables precise control of shaft rotation and high-precision operation. Designed specifically for servo and stepper motors. The backlash-free shaft connection is suitable for forward and reverse rotation. Low inertia makes it suitable for high-speed operation. Secured with set screws.
- Type
- 顶丝型
- Material
- 高强度铝合金
- Surface treatment
- 阳极氧化
- Accessories
- 固定螺钉
- Diaphragm material
- 304不锈钢
Overview
The hubs are made of high-strength aluminum alloy. The diaphragm is made of 304 stainless steel. High torsional rigidity enables precise control of shaft rotation and high-precision operation. Designed specifically for servo and stepper motors. The backlash-free shaft connection is suitable for forward and reverse rotation. Low inertia makes it suitable for high-speed operation. Secured with set screws.
Ordering rules
Example of model selection: Select the type and specifications according to the selection steps when ordering. Note: To add a keyway, append K after the bore diameter; for a square bore, append F; for a square hole, append S; for a spline, append H. Refer to the description for other bore types.
Models & specifications
| Model | Common d1, d2 bore diameters | ΦD | L | LF | F | M | Tightening torque (n.m) |
|---|---|---|---|---|---|---|---|
| DESJG-21×16.7 | 4-5-6-8 | 21 | 16.7 | 8.05 | 3 | M3 | 0.7 |
| DESJG-28×21.5 | 5-6-8-10 | 28 | 21.5 | 10.45 | 4 | M4 | 1.7 |
| DESJG-34×23.3 | 6-8-10-12-14 | 34 | 23.3 | 11.2 | 4.5 | M4 | 1.7 |
| DESJG-46×29.8 | 8-10-12-14-15-17-19 | 46 | 29.8 | 14.3 | 6 | M5 | 4 |
| DESJG-55×37.2 | 12-14-15-17-19-20-22-24-25 | 55 | 37.2 | 17.8 | 6 | M6 | 7 |
Note: The bore diameters at the two ends of the coupling can be freely selected in ascending order. The bores are machined to standard H7/H8 tolerances. The bore diameters listed in the table are for reference only. Non-standard sizes can be made to meet specific customer requirements. Please contact a sales representative or technical specialist for details.
| Model | Rated torque (N.m) | Allowable eccentricity (mm) | Allowable angular misalignment (°) | Allowable axial displacement (mm) | Allowable speed (RPM) | Static torsional stiffness (N.m/rad) | Moment of inertia (N.m) | Coupling weight (g) |
|---|---|---|---|---|---|---|---|---|
| DESJG-21×16.7 | 1.2 | 0.10 | 1 | ±0.14 | 1000 | 900 | 1.20×10⁻⁶ | 12 |
| DESJG-28×21.5 | 1.6 | 0.10 | 1.2 | ±0.18 | 1000 | 360 | 4.68×10⁻⁶ | 32 |
| DESJG-34×23.3 | 4 | 0.10 | 1.5 | ±0.18 | 1000 | 570 | 1.10×10⁻⁵ | 50 |
| DESJG-46×29.8 | 10 | 0.10 | 1.5 | ±0.27 | 8000 | 1450 | 4.70×10⁻⁵ | 102 |
| DESJG-55×37.2 | 25 | 0.10 | 1.5 | ±0.30 | 8000 | 2300 | 1.19×10⁻⁴ | 180 |
Specifications
| Parameter | Value | Unit |
|---|---|---|
| Type | 顶丝型 | |
| Material | 高强度铝合金 | |
| Surface treatment | 阳极氧化 | |
| Accessories | 固定螺钉 | |
| Diaphragm material | 304不锈钢 |







