Model · DGS
DGS Series Aluminum Alloy Oldham Short Clamping Coupling Series
The hubs are made of high-strength aluminum alloy. The sliding element is made of imported PA66, which offers excellent wear resistance, corrosion resistance, and electrical insulation. The sliding design compensates for radial and angular misalignment. The detachable design makes installation easy. Secured with clamping screws.
- Type
- 短型夹紧式
- Material
- 高强度铝合金
- Surface treatment
- 阳极氧化
- Accessories
- 紧固螺钉
- Sliding element material
- 进口 PA66
Overview
The hubs are made of high-strength aluminum alloy. The sliding element is made of imported PA66, which offers excellent wear resistance, corrosion resistance, and electrical insulation. The sliding design compensates for radial and angular misalignment. The detachable design makes installation easy. Secured with clamping screws.
Ordering Rules
Refer to the selection table to choose the type and parameters for your order. To add a keyway, append K after the bore-size number; use F for a hexagonal bore, S for a square bore, and H for a keyed bore. For other bore types, follow the instructions.

| Model | Type | Material | Surface treatment | Accessories |
|---|---|---|---|---|
| DGS | 短型夹紧式 | 高强度铝合金 | 阳极氧化 | 紧固螺钉 |
The standard surface treatment is used by default. Non-standard customization and special-material customization are available to meet the requirements of special operating conditions. (Please contact customer service for details on special customization.)




Models & specifications
| Model | Common d1, d2 bore sizes | D | L | LF | LP | F | M | Tightening screw torque (N·m) |
|---|---|---|---|---|---|---|---|---|
| DGS-12×14.9 | 3,4,5 | 12 | 14.9 | 7.3 | 4.9 | 2.5 | M2 | 0.45 |
| DGS-16×21 | 4.5,6,6.35 | 16 | 21 | 10.5 | 6 | 3 | M2.5 | 1 |
| DGS-20×22.1 | 5,6,6.35,7,8 | 20 | 22.1 | 11 | 6.6 | 3 | M2.5 | 1 |
| DGS-25×27.2 | 5,6,6.35,8,9,9.525,10,11,12 | 25 | 27.2 | 12.8 | 8.5 | 4 | M3 | 1.5 |
| DGS-32×33.3 | 5,6,8,9,9.525,10,11,12,12.7,14,15,16 | 32 | 33.3 | 16.1 | 11 | 5 | M4 | 3.5 |
The bore sizes at the two ends of the coupling can be freely selected, from smaller to larger. The bores are machined to standard H7/H8 tolerances. The bore sizes shown in the table are for reference only. Non-standard sizes can be manufactured to meet special user requirements; please contact a sales representative or technical specialist for details.
| Model | Rated torque (N·m) | Allowable misalignment (mm) | Allowable angular misalignment (°) | Allowable axial displacement (mm) | Maximum permissible speed (rpm) | Static torsional stiffness (N·m/rad) | Moment of inertia (N·m) | Weight (g) |
|---|---|---|---|---|---|---|---|---|
| DGS-12×14.9 | 0.5 | 0.6 | 2 | ±0.2 | 12000 | 9 | 7.1×10⁻⁸ | 3 |
| DGS-16×21 | 0.7 | 1 | 2 | ±0.2 | 9000 | 30 | 3.0×10⁻⁷ | 8 |
| DGS-20×22.1 | 1.2 | 1.3 | 2 | ±0.2 | 6500 | 47 | 7.4×10⁻⁷ | 13 |
| DGS-25×27.2 | 2 | 1.5 | 2 | ±0.2 | 5500 | 85 | 2.2×10⁻⁶ | 24 |
| DGS-32×33.3 | 4.5 | 2 | 2 | ±0.2 | 4500 | 190 | 7.3×10⁻⁶ | 48 |
Specifications
| Parameter | Value | Unit |
|---|---|---|
| Type | 短型夹紧式 | |
| Material | 高强度铝合金 | |
| Surface treatment | 阳极氧化 | |
| Accessories | 紧固螺钉 | |
| Sliding element material | 进口 PA66 |


