Industrial Slide Rails

FX3053 Series Heavy-Duty Steel Slides
Full-extension, detachable, side-mounted slides with an anti-bounce-back feature and a zinc-plated finish. Suitable for residential and industrial drawers, pull-out baskets, cabinets, trays, and other applications requiring a 250 lb load capacity.

FX3043 Series Steel Heavy-Duty Drawer Slides
Suitable for office equipment, industrial electronics, display shelving, medical equipment, automotive components, and more. Full extension, non-detachable, side-mounted. Bearing steel body with a zinc-plated finish.

FX3020 Series Steel Light-Duty Slides
Full-extension, non-detachable, side-mounted slides. Their compact design and full extension make installation easy. The main components are made of cold-rolled steel (SPCC) with an environmentally friendly blue-white zinc-plated finish. Suitable for office equipment, industrial electronic equipment, display shelving, medical equipment, and automotive components.

FX3070 Series Heavy-Duty Aluminum Alloy Slides
Full extension, dust and sand protection, end stops and plates, side-mounted. Custom bidirectional travel or travel limits available. Suitable for mobile medical shelters, military vehicles, vehicle-mounted generators, special-purpose vehicles, rail transit, aviation, aerospace, drone shelters, and more.
FX3090 Series Heavy-Duty Aluminum Alloy Slides
Full extension, sand and dust protection, end stops and retaining plates, side mounting. Suitable for medical shelters, military vehicles, vehicle-mounted generators, special-purpose vehicles, rail transit, aviation, aerospace, UAV shelters, and more.

SRH151/SRRH151 Series Steel Medium-Duty Slides
Suitable for financial equipment, industrial electronics, tool cabinets, medical equipment, automotive components, and more. Full extension, detachable/non-detachable, anti-rebound, side-mounted. SRH151: pull-out not available; SRRH151: pull-out available. Blue-white zinc electroplated finish.

FX3045L Series Steel Locking Slides
For use in medical equipment, RVs, boats, industrial electronics, and more. Full extension, detachable, lock-in, and side-mounted; finished with blue-white zinc plating.

FX2027B Series Stainless Steel Light-Duty Slides
Suitable for office equipment, industrial electronic equipment, display shelving, medical equipment, automotive components, and more. Partial extension, non-disconnect, side-mounted, rust- and corrosion-resistant. Hold-open type: The hold can be released by applying a force of at least 0.5kg (reference value) in the closing direction. When the slide is fully extended, a protrusion engages a leaf spring to provide a light hold against closing. When using linear slides vertically or at an angle, provide an external mechanism to prevent the slides from falling out.

FX2027 Series Steel Light-Duty Slides
The FX2027 series from Feng Lida Foxslide consists of steel light-duty slides made with SUS304 stainless steel rails and SUS440C balls. The slides have a 9.5mm profile height and a maximum rated load of 25kg per pair. They provide linear guidance and extension for cabinet drawers, medical and testing equipment, office automation equipment, and various light-duty automated mechanisms. Model numbers use length codes in inches: FX2027B-10 through FX2027B-20 correspond to slide lengths of 254~508mm and travel of 186.9~377.4mm. The specification table also lists A/B/C/D/E mounting hole locations and end dimensions, along with rated loads in N per 2 slides (176~255N), to help select a model based on installation space and load requirements.

FX2028 Steel Extra-Heavy-Duty Slide
The FX2028 series steel extra-heavy-duty slide is made primarily of bearing steel (Gr15) with a blue-white zinc-plated finish. It features two-way partial extension, a non-detachable design, and side mounting. The profile is 13mm thick, and the maximum load capacity per pair is approximately 400kg (7868N). Available lengths range from 130mm~1170mm, with 14 standard sizes: 130/210/290/370/450/530/610/690/770/850/930/1010/1050/1170mm. These offer travel of 74~601mm and load capacities of 613~7868N. Applications include office equipment, industrial electronics, display shelving, medical equipment, and automotive components.

FX2043 Series Steel Heavy-Duty Drawer Slides
FX2043 series steel heavy-duty drawer slides feature a steel profile construction with a cross-sectional width of approximately 22 mm. They are suitable for heavy-duty reciprocating applications such as tool cabinets, storage equipment, and industrial drawers. The catalog dimension table lists 14 sizes from FX3043-130 to FX3043-1170, with length L ranging from 130–1170 mm, L1 from 74–601 mm, and load capacity from 633–7868 N. The tabulated A and N values increase with length, allowing selection based on drawer length and load.

FX2090 Aluminum Alloy Heavy-Duty Slide
The FX2090 is a Foxslide®/Feng Lida aluminum alloy heavy-duty slide designed for applications including mobile medical shelters, military vehicles, vehicle-mounted generators, special-purpose vehicles, rail transit, aviation, aerospace, and drone shelters. Customization and OEM options are available. The slide features travel stops and an optional detent-in/detent-out mechanism. Its dust-resistant design includes grease-retaining stops and shields to improve lubricant retention. The stated 26.8mm may refer to the cross-sectional height. The slide is side-mounted and designed for 60% travel. Combining lightweight aluminum alloy construction with heavy-duty load capacity, it is suitable for industrial and special-purpose vehicle applications requiring long linear travel, dust resistance, and reliable travel stops.

FX3027 Series Stainless Steel Slide Rails
FX3027 series slide rails are made of stainless steel for corrosion resistance and high strength. They are suitable for applications with stringent cleanliness and corrosion protection requirements, including automation equipment, food machinery, and medical devices. Seven sizes are available, with rail lengths of 200~500 mm, travel of 228.8~524.0 mm, and load ratings of 275~373 N per 2 sliders. Mounting dimension A is 140~440 mm, and B is 160~460 mm. The compact rails operate smoothly and can be selected to meet load and travel requirements.

FX3027B Stainless Steel Light-Duty Slide Rail
The FX3027B stainless steel light-duty slide rail from Foxslide features a two-section stainless steel sliding mechanism, a profile height of just 19.2mm, and a rated load of 40kg. It is suitable for compact linear guidance and pull-out applications in food processing, medical, cleanroom, and wet or corrosive environments. The rail has a 9.5×12.5 ball track, a 4.5×5.3 mounting slot, and 2-Φ4.5 counterbored holes for direct mounting with M4 screws. Eight standard rail lengths are available: 200/250/300/350/400/450/500/550mm, in 50mm increments. See the model table for the corresponding travel and mounting hole dimensions A/B/C/D to select a model based on travel and available mounting space.

FX3028 Series Steel Extra-Heavy-Duty Slides
FX3028 series steel extra-heavy-duty telescopic slides feature Gr15 bearing steel balls, a steel body, and a blue-white zinc-plated finish for high rigidity, wear resistance, and corrosion resistance. These non-detachable, side-mounted slides provide partial extension in both directions and are suitable for heavy-duty pull-out applications in office equipment, industrial electronics, display shelving, medical equipment, and automotive components. Slide lengths range from 130~1170 mm in 80 mm increments, with corresponding travel of 74~601 mm and load capacities of 633~7868 N (approximately 65~800 kg). Load capacity increases linearly with length. A and B indicate the numbers of mounting holes in the inner and outer rails, respectively, and also increase with length. The final number in the model designation indicates the slide length in mm, allowing selection based on the available installation space.

FX3036 Series Slide Rails
The FX3036 series consists of industrial slide rails (linear slide rails). The catalog lists various rail length and travel combinations under model codes FX3036-12 through FX3036-28, with rail lengths ranging from 305~711 mm and travel from 324.2~729.8 mm. Each model specifies four mounting and overall dimensions, A, B, C and D (in mm), as well as a rated load based on 2 sliders. Rated loads range from 294~529 N and gradually decrease as the model size increases. The rails have a compact design and fixed mounting hole positions, making them suitable for linear guidance applications such as machine tool safety doors, electrical cabinets, automation equipment drawers and short-travel sliding tables. When selecting a model, determine the rail length and travel based on the available installation space, then check the rated load against the application requirements.

FX3036B Stainless Steel Medium-Duty Slide Rail
The FX3036B stainless steel medium-duty slide rail is designed for linear motion applications with medium loads. The page specifies a cross-sectional dimension of 19.1mm and a side clearance of 19.1mm. The catalog lists specifications for the FX3027 series in 7 stroke options: stroke 200~500mm, slide rail length 228.8~524mm, mounting hole spacing A of 140~440mm and B of 160~460mm, and rated load (per 2 sliders) of 275~373N. Load capacity decreases as stroke increases. These slide rails offer corrosion resistance and smooth operation, making them suitable for automation equipment, medical devices, food processing machinery, and other applications requiring high levels of rust resistance.

FX3045 Steel Light-Duty Slide
The FX3045 is a FOXSLIDE steel light-duty drawer slide with a profile width of 12.7mm, a rated load capacity of 45kg, and a maximum size of 950×950. Its blue-white zinc-plated finish provides corrosion resistance and smooth operation. It is designed for light-duty sliding applications in office furniture, cabinets, household drawers, and industrial electronics enclosures. Its mounting holes match those of conventional three-section ball-bearing slides, allowing it to directly replace comparable imported slides. The slide is stamped from cold-rolled steel strip, and its ball-bearing cage operates smoothly and quietly, making it suitable for frequent daily use. Optional front-locking or soft-close mechanisms in the same series are available, with full- or partial-extension configurations for furniture, chassis, and cabinet applications.

FX3051 Series Medium-Duty Slides
FX3051 series medium-duty slides are linear drawer slides with a blue-white zinc-plated finish for good rust and corrosion resistance. They are suitable for industrial cabinets, tool cabinets, equipment drawers, and other applications requiring moderate load capacity and smooth extension. The catalog lists 16 sizes from 10″ to 40″ in 2″ increments, corresponding to closed lengths L1 of 250–1000 mm (each closed length corresponds to its nominal inch size, e.g., 10″=250 mm and 40″=1000 mm). For each size, the catalog lists the closed length, extension length, and mounting hole positions and related dimensions for A′, B′, C′, A, B, C, D, E, F, and G (in mm), making it easy to select a slide that matches the mounting holes in the cabinet or equipment. When selecting a slide, first determine the closed length (the total length when the slide is retracted) based on the available installation space, then check the mounting hole spacing on the drawer and cabinet and the required extension length.

FX3053B Stainless Steel Heavy-Duty Slide
The FX3053B is a stainless steel heavy-duty slide designed for linear motion applications in factory automation equipment that require corrosion resistance and heavy-load guidance, such as mechanisms exposed to moisture, washdown, or mildly corrosive environments. Its stainless steel construction emphasizes load capacity and durability, making it suitable for drawers, safety doors, movable workbenches, and automated linear guide mechanisms. The catalog specifies a side mounting clearance of approximately 19.0 mm; travel, rated load, and mounting hole positions must be confirmed against the complete drawings. When selecting the slide, verify the actual load, available mounting space, and environmental corrosivity, and ensure that the mounting surfaces are flat and the fasteners are suitable.

FX3076 Series Heavy-Duty Slides
FX3076 series heavy-duty slides are suitable for applications requiring full extension, including high-load mobile cabinets, industrial cabinets, containers, multipurpose transport vehicles, automation equipment, and storage equipment. Their heavy-duty construction is available in different lengths to suit cabinet depth. Model suffixes indicate length in inches, with standard sizes from 10 to 58 inches in 2-inch increments, corresponding to overall lengths of 254 mm to 1473.2 mm. The catalog also provides mounting and overall dimensions A–S to assist with cabinet design and hole placement. Applications include financial equipment, industrial electromechanical equipment, tool cabinets, medical equipment, and multipurpose transport vehicles.

FX3076L Series Full-Extension Side-Mount Slides
The FX3076L series consists of heavy-duty, full-extension side-mount drawer slides that allow drawers to be pulled out completely for easy access. Lock-in/lock-out functionality secures the drawer in both closed and extended positions, keeping it safely closed in environments subject to vibration, such as moving vehicles. The non-disconnect design improves installation stability. These side-mount slides are suitable for a range of industrial storage applications, including financial equipment, industrial electronics, tool cabinets, medical equipment, and automotive components. Available in even-inch lengths from 12"~80" (1"=25.4mm), models are designated FX3076L-length to accommodate cabinets of varying depths.

SRH151 Series Slide Rails
SRH151 series slide rails are sliding components used for linear guidance in factory automation. The catalog identifies product specifications, rail length, and travel as the main selection criteria. The left side of the page shows the specification column headings for SRH151, but the exact length, travel, and load values were not fully retained in the OCR text. When selecting a rail, determine its length based on the available installation space and its effective travel based on the operating range, and check the mounting hole positions and load capacity. This series is suitable for automated mechanisms requiring linear sliding or guidance. Refer to the complete catalog and actual product dimensions for specific parameters.