Drum-shaped gear coupling

TGL Nylon-Sleeve Crowned-Tooth Gear Coupling
The TGL nylon-sleeve crowned-tooth gear coupling is a double-jointed coupling with curved teeth, widely used in a variety of mechanical and hydraulic applications. Its nylon-and-steel construction requires no maintenance and compensates for axial, radial, and angular misalignment. It features axial insertion for easy assembly and disassembly. Finished bore tolerances comply with ISO H7, and keyway width tolerances comply with DIN 6885/1 J59. Tapered bores and imperial bores are also available. The surface is typically black-oxide treated, and custom specifications are available for special operating conditions. The range includes standard models (such as TGL-14) and extended models (such as TGL-14-L), with a variety of bore diameters and custom options available.

NL Crowned-Tooth Gear Coupling
The NL crowned-tooth gear coupling is a commonly used medium-torque transmission coupling made of 45 steel with a blackened surface finish (zinc plating and phosphating are available on request). Its simple design makes it easy to maintain. It provides cushioning and vibration damping, and can accommodate relatively large axial displacements as well as small radial and angular displacements. It is suitable for high-speed shafts subject to frequent starts and changes in rotation direction. The range includes 10 sizes, from NL1 to NL10, with nominal torque ratings of 40–220 N·m and compatible motor power of 0.75–180 kW. The bore sizes at both ends can be configured to suit customer requirements. They are machined to standard H7/H8 tolerances, and custom specifications are available.

GICL Crowned Gear Coupling
The GICL crowned gear coupling features a crowned-tooth design that allows for greater angular displacement, improves tooth contact, increases torque transmission capacity, and extends service life. It compensates for radial, axial, and angular shaft misalignment. Its advantages include a compact structure, small turning radius, high load capacity, high transmission efficiency, low noise, and long maintenance intervals, making it particularly suitable for low-speed, heavy-duty applications. The series includes the GICL (crowned-tooth type) and GICL1–GICL94 (standard type). It is made of 45# steel, with a galvanized or phosphated surface finish, and supplied with fastening screws. Depending on the model, rated torque ranges from 0.71 to 4500 kN·m, permissible speed from 460 to 4000 rpm, and bore diameter from 55 to 630 mm.

GICLZ Drum Gear Coupling
The GICLZ drum gear coupling is a high-performance transmission coupling featuring crowned gear teeth for high load capacity—15–20% greater than that of straight-tooth couplings. Its flared tooth profile makes installation and removal easy, and transmission efficiency reaches 99.7%. Suitable for clockwise and counterclockwise rotation, it accommodates small relative radial displacements and has a compact design with low rotational inertia. The nominal torque range is 0.4–5,000 kN·m. Made of 45 steel, it is available with nickel plating, chrome plating, phosphating, or galvanizing and phosphating. Models range from GICLZ1 to GICLZ30, each with a different rated torque and permissible speed. Bore diameters can be customized to requirements and are machined to H7/H8 tolerances. Widely used to connect drive shafts and driven shafts in industrial machinery.

WG-Type Crowned-Tooth Gear Coupling
The WG-type standard crowned-tooth gear coupling features a wide internal gear ring, allowing it to compensate for significant shaft misalignment. It is suitable for connecting two horizontally aligned coaxial shafts in a drive system. Its nominal torque range is 800–1,400,000 N·m, and its permissible speed range is 5,300–7,500 rpm. Surface treatments include nickel plating, chrome plating, zinc plating, and phosphating; custom specifications are also available. Accessories typically include fastening screws. The product is available in a range of sizes, including WG1 to WG95. See the product table for specific dimensions and parameters.

WGP Drum Gear Coupling
The WGP series drum gear coupling features a crowned-tooth and internal-gear meshing design. The left sleeve has crowned teeth at its end, while the right sleeve has a connecting flange. The brake disc is held between the connecting flange and the coupling sleeve. This series is suitable for connecting drive input and output shafts, compensating for angular misalignment while transmitting torque. The couplings are made of 45# steel and have a blackened surface finish. Available treatments include zinc plating and phosphating. Multiple sizes are available, including WGP1, WGP2, and WGP6, with a wide range of bore diameters; custom specifications are also available. The WGP6 has a nominal torque of 11,200 N·m and a maximum allowable speed of 2,000 rpm.

WGC Vertically Mounted Crowned-Tooth Gear Coupling
The WGC vertically mounted crowned-tooth gear coupling is designed for two coaxial drive shafts connected by a coupling, transmitting nominal torques of 800–180,000 N·m. To improve lubrication and sealing, reduce the number of parts, and increase operational reliability, a one-piece design integrating the sealing end cover and internal gear ring is particularly recommended. Standard surface treatment is used under normal conditions; custom designs and special materials are available for demanding operating conditions. The series includes six sizes, WGC1 through WGC6, with nominal torques ranging from 800 to 11,200 N·m and allowable speeds of 5,000–7,500 rpm.

WGZ-Type Crowned-Tooth Gear Coupling with Brake Wheel
The WGZ-type crowned-tooth gear coupling with brake wheel is designed to connect two horizontal, coaxial transmission shafts and can be used with a shoe brake. Brake wheel diameters range from 160 to 800 mm, and the rated torque transmitted ranges from 800 to 1,800,000 N·m. Featuring crowned teeth, the coupling offers effective lubrication and sealing, fewer components, and high operating reliability. The integral design, in which the sealing end cover and internal gear ring are combined into one unit, is especially recommended. Key parameters include rated torque, allowable speed, shaft bore diameter, and shaft bore length. Custom non-standard bores are available to meet user requirements.

WGT drum-shaped gear coupling with intermediate sleeve
The WGT drum-shaped gear coupling with intermediate sleeve is designed to connect two horizontal, coaxial drive shafts. It has a small tooth clearance, allows only slight relative radial displacement, and features a compact design. Typically, the internal gear ring is connected to the intermediate sleeve, while the external gear sleeves at either end connect to the driven shaft and the prime mover shaft, respectively. To allow the coupling to self-center during operation, the weight of the intermediate sleeve must not exceed 2% of the tangential meshing force at the gear pitch circle, calculated from the nominal torque. For improved lubrication and sealing, an integrated design combining the sealing end cover and internal gear ring is recommended. The product is made of grade 45 steel. Surface treatments include powder coating, galvanizing, or phosphating. Fastening screws are included. Nominal torque range: 800–8,000 N·m; bore diameter: 12–56 mm; bore length: 32–84 mm.

NGCL Drum Gear Coupling
The NGCL drum gear coupling is made of grade 45 steel. Surface treatments are available in nickel, chrome, zinc, or tin plating. Custom designs and special materials are available for demanding operating conditions. The nominal torque range is 400–10,000 N·m, the allowable speed range is 1,900–4,000 rpm, and the shaft bore diameter range is 20–110 mm. Widely used in drive systems, it provides reliable torque transmission and accommodates misalignment.

CLZ Gear Coupling
The CLZ gear coupling is a crowned-tooth coupling that accommodates larger angular misalignment, improves tooth contact conditions, increases torque transmission capacity, and extends service life. Its compact radial dimensions and high load capacity make it suitable for low-speed, heavy-duty applications. It is made of 45 steel with a blackened finish. Zinc plating, phosphating, and PTFE accessories are available as options. The range includes 20 sizes, from CLZ1 to CLZ20, with rated torques from 710 to 1,000,000 N·m and allowable speeds from 300 to 3,780 rpm. Bore diameters can be customized, with keyways, hexagonal bores, square bores, splined bores, and other options available on request.

GCLD Drum-Shaped Gear Coupling
The GCLD drum-shaped gear coupling has a smaller tooth pitch than the GICL standard model, allows less relative radial displacement, and features a compact design and low moment of inertia. It is suitable for applications paired with motors. It can rotate in either direction, and either external-tooth sleeve can serve as the input end. The nominal torque range is 1.12 kN·m to 50 kN·m. It is made of 45# steel and is typically blackened; nickel, chrome, zinc, and copper plating are also available. For improved lubrication and sealing, the integrated design with the sealing end cover and internal gear ring formed as one piece is recommended.

Couplings
This series includes two types: L-type jaw couplings and DGF-type crowned gear couplings. L-type jaw couplings are made of ductile iron, 45# steel, or aluminum alloy, with a black-oxide finish and cylindrical screws. They effectively absorb shock loads, offer excellent oil retention, and require no maintenance. They provide a maximum torque capacity of 54.2 kg·m and allow radial misalignment of 0.3 mm, angular misalignment of 1°, and axial misalignment of +0.5 mm. DGF-type crowned gear couplings are made of 45# steel, with a black-oxide finish and set screws. Their crowned-tooth design provides excellent misalignment compensation. They are easy to install by axial insertion, allow wear to be inspected, and can be used to mount various fans. Finished bore tolerance is H7; keyway width tolerance is DIN 6885/1 JS9. DGF sizes range from 28 to 90, with outside diameters of 65–200 mm, lengths of 90–245 mm, and maximum finished bore diameters of 24–90 mm. Bore options include keyed (K), hexagonal (F), square (S), splined (H), and other custom shapes.

DGF Coupling
The DGF coupling features a crowned-tooth design that absorbs vibration and reduces noise. It offers excellent misalignment compensation, is easy to install by axial insertion, and allows wear to be visually inspected. Suitable for mounting a variety of fans. Finished bore tolerance: H7 per ISO standards; keyway width tolerance: JS9 per DIN 6885/1. Made of 45# steel with a blackened finish; supplied with set screws. Custom specifications are available.

NGC1.9 Series Gear Coupling
The NGC1.9 gear coupling is made of 45# steel and is available with nickel, chrome, zinc, or tin plating. It has a nominal torque of 16,000 N·m and a maximum permissible speed of 1,500 rpm. Bore diameters range from 80 to 130 mm, with several bore lengths available (60–95 mm). Designed for heavy-duty power transmission, the product can be custom-made to non-standard specifications or from special materials.

TGC1 Crowned-Tooth Gear Coupling
The TGC1 series crowned-tooth gear coupling features a lightweight design and low moment of inertia, and can accommodate relatively large axial displacement. It is suitable for connecting two horizontal, coaxial drive shafts in medium- and low-load, high-speed applications. It can rotate in either direction, and either external-tooth sleeve can serve as the driving-shaft input end. Product parameters include maximum shaft diameter, nominal torque, ultimate torque, speed, axial compensation, radial compensation, moment of inertia, and weight. Custom bore dimensions are available.