Rod End Spherical Plain Bearing

POSB Series Male Threaded Lined Rod End Spherical Plain Bearings (Inch Series)
The outer sliding surface is fitted with a bronze liner; the rod end body is zinc-plated and has a lubrication hole or grease nipple.

NHS Series Rod End Spherical Plain Bearings
Maintenance free. Rod body with left or right-hand female thread. Rod body pressed around inner ring. Outer race lined with PTFE composite material. Surface of rod body zinc plated.

Internally threaded assembled self-lubricating rod end bearing SI..T/K
This series consists of an internally threaded rod end body assembled with a self-lubricating radial spherical plain bearing G.. PW. The rod end body has a left- or right-hand internal thread and a zinc-plated surface. It is suitable for oscillating movements under high loads with minimal maintenance. A wide range of sizes is available, with bore diameters from 5 mm to 50 mm, thread sizes from M5*0.8 to M48*2.0, angles of inclination up to 17°, dynamic load ratings of 5.70–88.0 kN, and static load ratings of 6.00–114.0 kN. For a left-hand thread, add the suffix “L” to the model number, e.g. SI.18 T/K.

SA..T/K / SI..T/K Self-Lubricating Rod End Spherical Plain Bearings
This series of self-lubricating rod end spherical plain bearings is available in female-thread versions (SI..T/K) and male-thread versions (SA..T/K). The rod end housing has a left- or right-hand internal or external thread and consists of a rod end housing and a self-lubricating radial spherical plain bearing, G..PW. The rod end housing is zinc-plated. Bearing bore diameters range from 5 mm to 50 mm, with thread sizes from M5×0.8 to M48×2.0. These bearings can support radial and axial loads and are suitable for mechanical linkages, automation equipment, robotics, and other applications.

SQ..RS Series Spherical Plain Rod-End Bearings
This series of spherical plain rod-end bearings includes straight-shank types (SQ..RS) and Z-type models (SQZ..RS). The bearing housing is made of zinc alloy and has either a left- or right-hand thread, with a rubber seal. Bore diameters range from 5 to 22 mm, with various thread sizes available in standard or fine pitches. The RS suffix indicates a sealed model; models without seals are designated SQ... Add L after the basic model number for left-hand threads (e.g., SQL6RS). Suitable for applications requiring angular compensation and oscillating motion, such as automation equipment and mechanical transmission systems.

SQZ..RS
SQZ..RS series spherical plain rod-end bearings feature a straight shank, a zinc-alloy housing and rubber seals, and are available with left- or right-hand threads. Bore diameters range from 5 to 22 mm, thread sizes from M5 to M22, overall lengths from 46 to 145 mm, and widths from 7 to 24 mm. Load ratings range from 2.8 to 23 kN, weights from 0.025 to 0.76 kg, and allowable tilt angles from 7.5° to 15°. Add the suffix L to models with left-hand threads (for example, SQL6RS). Models without seals belong to the SQ.. series. Suitable for automation equipment, mechanical connections, and similar applications.

SI...T/K Series Rod End Spherical Plain Bearings
The SI...T/K series rod end spherical plain bearings are maintenance-free, self-lubricating bearings. The rod end body has a left- or right-hand female thread, and the sliding contact surface uses a steel/PTFE composite for oscillating motion without additional lubrication. The rod end body is zinc-plated for a degree of corrosion resistance. The series covers nominal diameters from 5 mm to 50 mm, with thread sizes ranging from M5×0.8 to M48×2.0; selected sizes are available with standard or fine threads. These bearings are suitable for construction machinery, automation equipment, transmission linkages, pneumatic and hydraulic systems, and other applications that need to transmit oscillating motion or tensile and compressive forces in confined spaces.

POS Series Rod End Spherical Plain Bearings
POS Series rod end spherical plain bearings have externally threaded rod ends, available with left- or right-hand threads. The spherical outer ring is fitted with a bronze liner, while the rod end body is zinc-plated and equipped with a lubrication hole or grease nipple. These bearings are suitable for joints requiring oscillating and tilting motion in applications such as automation equipment, construction machinery, and hydraulic cylinders. They can withstand combined radial and axial loads. The range covers POS 5 to POS 30, with bore diameters of 5–30 mm and thread sizes from M5×0.8 to M30×2.0. Various fine-pitch thread options and special mounting models (such as POS 30-1) are also available. Left-hand models can be selected by adding L before the model number (e.g., POSL 8), and stainless steel models by adding S (e.g., SPOS 8).

PHS Series Rod End Bearings
PHS Series Rod End Bearings are spherical plain bearings centered on a spherical sliding contact. They are used in applications requiring angular compensation and load transmission, such as automation equipment, linkage mechanisms, and connections for pneumatic and hydraulic cylinders. The catalog shows front, side, and top views, along with a dimensional table. Dimensions include bore diameter d, spherical diameter d3, width B, fork opening width C1, head width W, and various lengths from L3 to L676, covering connection and installation requirements across different sizes. Related notes on the same page list typical features of maintenance-type bearings: the outer race has a spherical bronze liner, the rod-end body is zinc-plated, and the bearing has a lubrication hole or oil ring. The notes also explain the model designation: “L” is added for left-hand threads, and “S” is prefixed for stainless steel. Refer to the original catalog table for exact specifications, load ratings, and weights.

PHSB Series Male-Thread Lined Rod End Bearings
PHSB Series male-thread lined rod end bearings feature a male-threaded shank and a lined bearing insert. They are suitable for connections requiring directional adjustment and oscillating motion in automation equipment, conveyors, packaging machinery, and similar applications. This series uses imperial dimensions and includes nine sizes, from PHSB 3 to PHSB 16: 3, 4, 5, 6, 7, 8, 10, 12, and 16. The catalog provides detailed dimensions for each model, including bore diameter, outside diameter, width, center distance, thread size, and length, with imperial and metric equivalents, as well as weight data. The liner helps reduce friction and compensate for wear, while the male-threaded end allows for easy installation and fastening.

CF Series Rod End Bearings
The CF series comprises inch-size rod end bearings with a left- or right-hand female thread. The rod body is formed around the inner ring by a swaging process and zinc-plated for corrosion protection. The steel-on-steel sliding contact surfaces make these bearings suitable for general industrial connections, power transmission, and adjustment mechanisms. The series includes sizes such as CF3, CF4, CF5, CF6, CF7, CF8, CF10, and CF12, with main body dimensions ranging from approximately 4.826 mm to 19.05 mm. Thread sizes include 10-32, 1/4-28, 1/2-24, 3/4-24, 7/8-20, 1/2-20, 3/4-18, and 1/2-16. Load ratings range from approximately 9 to 63 kN. The smaller sizes marked with * have no lubrication hole or grease nipple; other sizes can be fitted with a grease nipple using the CF...S designation. Add “L” to the model designation for a left-hand thread, for example, CFL10.

CM Series Rod End Bearings
CM Series Rod End Bearings, also known as wing bearings, are spherical plain bearings used in pivoting connections in mechanical linkages, push rods, and automation equipment. Models in this series use CM as the base designation, with additional versions carrying the CM...S suffix. The page provides dimensional diagrams covering parameters such as bore diameter d2, width B, center height h1, and thread specifications. Refer to the selection tables in the complete catalog for specific dimensions and load data. These rod end bearings typically offer self-alignment, compensation for angular misalignment, a compact design, and ease of installation. They are suitable for mechanical connections requiring oscillating or tilting motion.

CF/CM...T Series Rod End Bearings
This series comprises inch-size rod end bearings in two model ranges: CF...T and CM...T. The rod end bodies are formed by extrusion and zinc-plated. The spherical outer surface is bonded with PTFE composite material, and the sliding contact surface is steel/PTFE fabric, offering low friction and wear resistance. These bearings require maintenance. They are available with left- or right-hand external threads; left-hand versions have an L added after the series designation, such as CFL10 T and CML5 T. Sizes range from CF 5 T to CF 12 T and CM5 T to CM12 T, with load ratings of approximately 28.693–113.642 kN and weights of approximately 0.032–0.295 kg. They are suitable for oscillating and tilting connections in linkages, automation equipment, and transmission systems.

CM...T Series Rod End Spherical Plain Bearings
The CM...T series comprises inch-size rod end spherical plain bearings that require maintenance. The rod end housing has a right- or left-hand external thread and is swaged around the inner ring. The surface is zinc-plated. The outer spherical surface is bonded with PTFE composite material, and the sliding contact surface is steel/PTFE fabric, providing self-lubrication and low friction. Bore diameters range from 7.938 to 19.050 mm, load ratings from 28.693 to 113.642 kN, and individual weights from 0.032 to 0.259 kg. The series is available in six sizes: CM5 T, CM6 T, CM7 T, CM8 T, CM10 T, and CM12 T. For a left-hand thread, add L after CM (for example, CML5 T).

NOS Series Rod End Bearings
The WERB NOS Series comprises maintenance-free rod end bearings with left- or right-hand external threads. The rod end body is press-fitted around the inner ring, and the outer ring’s spherical surface is bonded with a PTFE composite, providing maintenance-free, self-lubricating operation. The rod end body is zinc-plated. These bearings are suitable for oscillating and tilting connections in automation equipment, transmission systems, linkage mechanisms, and a wide range of industrial machinery. The range includes NOS 3 to NOS 25, with bore diameters of 3–25 mm, thread sizes from M3×0.5 to M24×2.0, dynamic load ratings of 1.7–68 kN, static load ratings of 2.0–85 kN, and weights of 10–640 g. Add the suffix L to left-hand thread models, for example, NOS 18 L.

PHS...EC Series Maintenance-Free Rod End Spherical Plain Bearings
The PHS...EC series comprises maintenance-free rod end spherical plain bearings. The rod end body has a left- or right-hand internal thread and is swaged around the inner ring. The outer ring's spherical surface is lined with PTFE composite material, and the surface is zinc-plated, so no maintenance is required. The series covers bore diameters d=3–22 mm and thread sizes from M3×0.5 to M22×1.5, with dynamic load capacities of 3,500–74,700 N and static load capacities of 2,480–36,400 N. Left-hand threads are available (indicated by an L suffix in the model number, e.g. PHS18ECL), as are right-hand threads. Suitable for automation equipment, linkage mechanisms, hydraulic and pneumatic systems, and other applications.

PHS/POS...EC Series Rod End Spherical Plain Bearings
This series comprises maintenance-free rod end spherical plain bearings in two subseries: PHS and POS. The rod end bodies have left- or right-hand internal threads and are formed by extrusion. The outer ring's spherical surface is bonded with PTFE composite material, and the surface is zinc-plated. No additional lubrication is required. Bore diameters range from 3 to 22 mm, thread sizes from M3×0.5 to M22×1.5, and ball diameters from 7.938 mm to 38.100 mm. Maximum dynamic load capacity is 74,700 N, and maximum static load capacity is 36,400 N. Models with left-hand threads have an “L” at the end of the model code. These bearings are widely used in automation equipment, drive mechanisms, and mechanical joints.

SI...E(S)/SA...E(S) Series Rod End Spherical Plain Bearings
The SI...E(S) and SA...E(S) series are rod end spherical plain bearings assembled from a rod end body and a GE...E(S) or GE...ES 2RS radial spherical plain bearing. SI models have a female-threaded rod end body, while SA models have a male-threaded body; both are available with left- or right-hand threads. The rod end body is zinc-plated. SI...ES/SA...ES models feature a lubrication hole or grease nipple. The range covers shaft diameters d=6–80 mm, thread sizes M6×1.0 to M64×4.0, dynamic load ratings of 3.40–400 kN, static load ratings of 8.15–750 kN, and weights of approximately 17–12,000 g. Add L to the model designation for left-hand threads (e.g. SAL30ES). For bore diameters d≥15, a 2RS double-sided sealed design is available (e.g. SA25ES 2RS).

SA...E(S) Series Rod End Spherical Plain Bearings
SA...E(S) series rod end spherical plain bearings are radial spherical plain bearings with a male-threaded rod end body. They consist of a zinc-plated rod end body and a GE...E (S) or GE...ES 2RS radial spherical plain bearing. The rod end body is available with left-hand or right-hand external threads. Models with left-hand threads carry the prefix L, for example, SAL30ES. SA...ES rod end bodies have a lubrication hole or grease nipple; sizes marked with * are not supplied with a lubrication hole or grease nipple. Bore diameters range from 6 to 80 mm, thread sizes from M6×1.0 to M64×4.0, dynamic load ratings from 3.4 to 400 kN, static load ratings from 8.15 to 750 kN, and weights from 17 to 12,000 g. A 2RS double-sealed design is also available for bearings with bore diameter d ≥ 15, for example, SA25ES 2RS. These bearings are suitable for reciprocating and oscillating motion and for connections requiring self-alignment. They are widely used in construction machinery, hydraulic cylinders, agricultural machinery, and other applications.

SI...C/SI...ET 2RS Series Female-Thread Rod End Spherical Plain Bearings
This series of maintenance-free female-thread rod end spherical plain bearings features a rod end body with a right-hand thread (standard) or left-hand thread and a zinc-plated surface. Each bearing consists of a rod end body and a self-lubricating radial spherical plain bearing, GE...C or GE...ET 2RS. Model designations comprise the SI prefix, an optional L for left-hand thread, the bore diameter and the bearing type—for example, SI15C or SI15 ET 2RS. Bore diameters range from 6 to 80 mm, thread sizes from M6X1.0 to M64X4.0, dynamic loads from 3.6 to 570 kN, static loads from 8.15 to 750 kN, and weights from 21 to 12,000 g. Suitable for connections requiring oscillating or tilting motion in construction machinery, textile machinery, packaging machinery and other equipment.

SA...C/SA...ET 2RS Series Rod End Spherical Plain Bearings
The SA...C/SA...ET 2RS series comprises maintenance-free rod end spherical plain bearings with left- or right-hand male threads and zinc-plated bodies. Each bearing consists of a rod end body and a self-lubricating radial spherical plain bearing, GE...C or GE...ET 2RS. Nominal bore diameters d range from 6 to 80 mm, with thread sizes from M6X1.0 to M64X4.0. Load capacity and weight increase with size. Left-hand threads are available; add the suffix L to the model number. These bearings are suitable for oscillating or tilting connections in machinery, including linkages, cylinders, and conveying equipment. They are self-lubricating, maintenance-free, and wear-resistant. The ET 2RS type has a double-lip seal.

SQZ.RS / SQ.RS Series Spherical Rod-End Bearings
This series of spherical rod-end bearings includes two designs: straight (SQZ..RS) and angular (SQ..RS). The ball housing is made of zinc-based alloy, features left- or right-hand threads, and is fitted with a rubber seal. Sizes range from 5 mm to 22 mm, with thread specifications from M5×0.8 to M22×1.5. Some sizes are available in -1 variants with a different thread pitch. Models with left-hand threads carry the suffix L; models without seals belong to the SQ… series. These bearings are suitable for articulated connections in mechanical assemblies and can transmit radial and axial loads. Weights range from approximately 25 g to 750 g.

SQ / SQZ Series Spherical Rod End Bearings
This series comprises spherical rod end bearings with rubber seals, available in two types: straight SQZ and angled SQ. The ball housings are made of zinc-based alloy and have left- or right-hand threads; rubber dust seals are available. Sizes cover bore diameters from 5 to 22 mm, with thread specifications ranging from M5X0.8 to M22X1.5. Some sizes are available with an alternative -1 pitch (such as 10RS-1 and 12RS-1). Left-hand threads are identified by adding L to the model number (for example, SQL 6RS). These products are used in mechanical linkages, automation equipment, transmission mechanisms, and other connections requiring spherical alignment and compensation for angular misalignment. They offer flexible installation, wear resistance, and protection against dust through sealing.

GK.DO Series Rod End Spherical Plain Bearings
GK.DO Series Rod End Spherical Plain Bearings are designed specifically for hydraulic components and consist of a rod-end housing combined with a radial spherical plain bearing. This series features an open, relubricatable design, with a lubrication hole or grease nipple on the rod-end housing for periodic greasing. The GK 10DO and GK 12DO sizes are marked with an asterisk (*) and cannot be relubricated after leaving the factory. Products are also available with double-sided -2RS seals (for example, GK 50DO 2RS) for improved protection against dust and contaminants. The series covers bore diameters from 10 to 80 mm in 14 sizes. It is suitable for hydraulic cylinders, construction machinery, and heavy-duty oscillating mechanisms, and features a compact design, high load capacity, and easy installation.

GF.DO Series Rod End Spherical Plain Bearings
GF.DO series rod end spherical plain bearings are designed for hydraulic components and feature a maintenance-required, weld-on construction. The rod end housing has a weldable base and consists of a GE.ES or GE.ES 2RS radial spherical plain bearing fitted into the housing. A lubrication hole or grease nipple allows grease to be replenished at regular intervals. The range extends from GF 20 DO to GF 120 DO, with bore diameters of 20–120 mm, dynamic load ratings of 30–950 kN, static load ratings of 67–3250 kN, and individual weights of approximately 0.35–79 kg. A double-sided -2RS seal configuration can be made to order, such as GF 70 DO 2RS, for applications requiring seals on both sides to protect against dust and dirt.

GIHN-K.DO/GIHN-K..LO Series Rod End Spherical Plain Bearings
This series of WERB BEARINGS rod end spherical plain bearings is designed for hydraulic components and includes two designs: GIHN-K.DO and GIHN-K..LO. The GIHN-K.DO consists of a GE.ES or GE.ES 2RS radial spherical plain bearing and a rod end body; the GIHN-K..LO consists of a GE..LO radial spherical plain bearing and a rod end housing. Both are maintenance-required designs. The rod end body/housing has a left- or right-hand internal thread, a clamping slot and a set screw, as well as a lubrication hole or grease nipple, making these bearings suitable for hydraulic cylinders and other hydraulic components. They are designed to internationally standardized rod end spherical plain bearing dimension series. Refer to the catalog data tables for specific dimensions, load ratings and weights.

GIHN-K..DO/GIHN-K..LO Series Rod-End Spherical Plain Bearings
This series of rod ends is designed for hydraulic components and consists of a radial spherical plain bearing fitted into a rod-end housing. The housing has a left- or right-hand internal thread, along with a clamping slot and locking screw (locknut), for easy installation on the rod end of a hydraulic cylinder or actuator. A lubrication hole or grease nipple is provided for convenient maintenance. GIHN-K..DO / GIHR.DO models use GE.ES or GE.ES 2RS radial spherical plain bearings (maintenance-required type); GIHN-K..LO models use GE..LO radial spherical plain bearings (low-friction type). Available in a range of bore sizes, these products are supplied with complete dimensional, rated load and weight data. They are suitable for oscillating connections and angular compensation in construction machinery, hydraulic equipment and similar applications.

GK Series Rod End Spherical Plain Bearings
This series of rod end spherical plain bearings is designed for hydraulic components and is available in two types: GK...NK and GK...SK. Both types require maintenance and feature an internal thread and a locknut. Each consists of a GE...ES or GE...ES 2RS spherical plain bearing and a rod end housing fitted with a lubrication hole or grease nipple. Left- or right-hand threads are available. Suitable for connections and oscillating motion in hydraulic systems.