Set Screw Coupling

SLI Series Set-Screw Elastomer Coupling
The SLI Series Set-Screw Elastomer Coupling is designed for drive connections with servo, stepper, and general-purpose motors. The body is made of anodized 6061 aluminum alloy, the flexible spacer is made of polyurethane, and the set screws are black-oxide-treated SCM435 steel. It is available with four-, six-, or eight-lobe flexible spacers, and the bores are secured with set screws. Outer diameters range from 14 to 80 mm, and keyways can be customized for the bores. For example, model SLI-65-20K7×25K8 has an outer diameter of 65 mm and a length of 90 mm, with a 20 mm D1 bore and 7 mm keyway, and a 25 mm D2 bore and 8 mm keyway.

SMI Series Rigid Couplings
SMI Series rigid couplings feature a body made of 2024 aluminum alloy with an anodized finish, and black-oxide-treated SCM435 set screws. They offer zero backlash, high torque capacity, and tolerance compensation, making them suitable for servo motors, stepper motors, general-purpose motors, and encoders. The model designation comprises the series, type, outer diameter, and D1 and D2 bore diameters for precise power transmission.

SSEII Series Set Screw Coupling
The SSEII Series Set Screw Coupling features zero backlash and high torque capacity. Its parallel-cut construction ensures precise, stable power transmission. Available in standard and shortened lengths, it uses a fixed set-screw fastening method for easy installation and removal. The main body is made of CSS alloy steel, natural-finish SUS303 stainless steel, or SCM435, and is secured with set screws. Suitable for servo motors, stepper motors, and general-purpose motors, it is an essential connection component in industrial automation drive systems.

LL-D Series Couplings
The LL-D series consists of compact set-screw couplings designed for flexible connection and torque transmission between two shafts. They are suitable for light-duty applications involving small servo motors, stepper motors, encoders, lead screws, and similar equipment. Model codes specify the outer diameter and length; for example, LL-D-D16L16 has an outer diameter of 16mm and a length of 16mm. Common outer diameters are 16, 20, 25, and 32mm, with short and long lengths available for each diameter (16/24, 20/30, 25/35, 32/42). Each outer diameter accommodates a different bore range, from 3-8mm to 6-16mm, allowing selection to match the actual motor and driven shaft diameters. Set screw sizes increase with the outer diameter from M2.5 and M3.0 to M4.0. The distance L1 from the screw center to the end face ranges from 3~8mm, and the specified tightening torque ranges from 0.8~2.5N·m. During assembly, tighten to the applicable torque to avoid damaging the shafts and screws.