Crossed Tapered Roller Bearing

HYR Series Bearings

Crossed Tapered Roller Bearings

Crossed tapered roller bearings are a precision bearing line developed by Boying (BYC) for high-precision rotary applications involving loads from multiple directions. They consist of a one-piece outer ring, a split inner ring, and tapered rollers arranged in an X pattern, separated by nylon spacers. Their distinctive cone angle and geometry provide an effective support span several times greater than the bearing width, allowing them to handle axial and radial loads as well as overturning moments within a compact cross-section. A single bearing can replace a conventional bearing arrangement. Line contact between the tapered rollers and raceways prevents unidirectional slipping and reduces wear. Combined with clearance lubrication between the inner rings and an adjustable preload design, this delivers high rigidity and rotational accuracy over the long term. The bearings are supplied in split form, with preload adjusted by the user during installation. Made from high-quality bearing steel and given a special heat treatment, they feature lifting holes and are widely used in precision rotary equipment such as CNC vertical lathes, vertical boring and grinding machine tables, precision indexing tables, gear hobbing machines, turrets, and industrial robots.

BXR Series Crossed Tapered Roller Bearings

BXR series crossed tapered roller bearings consist of one outer ring, two inner rings, tapered rollers, and spacers. They are a type of crossed roller bearing. The bearing can be installed as a complete unit by bolt preloading and is suitable for carrying radial and axial loads as well as overturning moments. Typical applications include rotary tables, machine-tool tables, radar antennas, and other rotary support systems. The series has bore diameters ranging from 203.2 to 1549.4 mm, outside diameters from 279.4 to 1828.8 mm, widths from 31.75 to 114.3 mm, chamfers from 1.5 to 5 mm, and basic dynamic load ratings of approximately 51.3 to 518 kN. Models correspond to interchangeable models from manufacturers such as SKF, NACHI, URB, and PSL, making replacement easy.

BXR and BJXR Series Crossed Tapered Roller Bearings

This series of crossed tapered roller bearings consists of one outer ring, two inner rings, tapered rollers, and spacers. It is suitable for applications involving high radial and axial loads as well as overturning moments. The catalog lists multiple BXR and BJXR models, with bore diameters ranging from 203.2 to 1549.4 mm, maximum outside diameters of 1828.8 mm, widths of 31.75 to 114.3 mm, chamfers of 1.5 to 5 mm, and basic dynamic load ratings of approximately 51.3 to 518 kN. Some models have interchangeable equivalents from brands such as SKF, NACHI, URB, and PSL, making them suitable as replacements for imported bearings. For accurate installation, assemble the components in the specified order and verify the settings through flange preload and clearance measurements.

XR/JXR Series Crossed Tapered Roller Bearings

XR/JXR Series Crossed Tapered Roller Bearings

XR/JXR series crossed tapered roller bearings use a steep contact angle and tapered geometry to increase the overall effective bearing span. The extended lines of the tapered roller rolling surfaces intersect on the bearing's axis of rotation. The rollers roll without sliding relative to the raceways, resulting in a much higher limiting speed and lower frictional torque than crossed cylindrical roller bearings. Each bearing consists of one outer ring, two split inner rings, crossed tapered rollers and nylon spacers. Line contact between the rollers and raceways allows the bearing to support radial loads, axial loads and high overturning moments simultaneously. A single bearing can replace a conventional bearing assembly, offering a compact cross-section and high rigidity. Adjustable preload extends bearing life and improves rigidity and runout accuracy. The nylon sealing ring has low inertial mass and little effect on operating torque. The finished components are supplied unassembled and installed by the user through alignment and preloading. The gap between the inner rings provides lubrication, and lifting holes in the outer ring simplify installation. Bore diameter: 203.2~1549.4mm; outside diameter: 279.4~1828.8mm; height: 31.75~114.3mm; basic radial dynamic load rating: 51.2~516kN; axial dynamic load rating: 61.4~698kN; limiting speed (oil): 80~800r/mi