Miniature Push-in Fittings

APC/FPCVC Series Mini Fittings

APC/FPCVC Series Mini Fittings

Mini tube fittings are ultra-compact pneumatic push-in fittings approximately 40% smaller than standard pneumatic fittings. Their ultra-small oval release rings make tube insertion and removal easy. They are suitable for air piping systems using PU or nylon tubing. The body is brass, the locking claws are stainless steel, the retaining ring is polyoxymethylene (POM), and the seals and O-rings are nitrile rubber (NBR). Technical specifications: fluid: air only (not for use with other gases or liquids); operating pressure range: 0~1.0MPa (150psi); vacuum pressure: -100kPa (-29.5 in-Hg); operating temperature range: 0~60℃ (32~140℉). The series includes APC straight fittings (tube diameters: 3/4/6mm; threads: M3×0.5, M5×0.8, M6×1.0, R1/8, R1/4, G1/8, G1/4) and FPCVC fittings (tube diameters: 4/6/8/10mm; threads: M5, M6, R1/8, R1/4, R3/8; models available in (B) variants). Select the model based on the combination of tube outside diameter and connection thread size.

APLC-C Series Pneumatic Push-in Fittings

APLC-C Series Pneumatic Push-in Fittings

The APLC-C series consists of miniature pneumatic push-in fittings for tubing with outer diameters of Φ3, Φ4, and Φ6 mm. Thread options include M3×0.5, M5×0.8, M6×1.0, R1/8, G1/8, and G1/4. Model numbers consist of APLC, the tube diameter code (03/04/06), the thread code, and the suffix C. The model table provides overall and mounting dimensions, including L1, L2, L3, ΦD1, and φ. These fittings provide compact connections for small pneumatic actuators, valve manifolds, and piping systems. When selecting a model, confirm the tube outer diameter, thread specification, and available installation space.

APLL-C Series L-Type Push-in Threaded Elbow

APLL-C Series L-Type Push-in Threaded Elbow

The APLL-C series is an L-type push-in threaded elbow (pneumatic fitting) for 90° connections with pneumatic tubing of Φ3, Φ4, or Φ6 mm outside diameter. Thread options include M3×0.5, M5×0.8, and M6×1.0 metric threads, as well as R1/8, G1/8, and G1/4 pipe threads. Model numbers consist of “APLL + tube diameter code (03/04/06) + thread code (M3C/M5C/M6C/01C/G01C/G02C)”; the final C identifies the series. For each model, the catalog specifies dimensions including ΦD (applicable tube outside diameter), R (thread size), L1 (thread engagement length), L2, L3 (overall length), ΦD1 (hex width across flats), and φ (through-hole/mounting-hole diameter). These dimensions can be used to check for tubing interference and available installation space. Three tube diameters and six thread sizes cover 13 standard models, suitable for compact tubing layouts and quick assembly and removal in automated equipment pneumatic systems.

APOC-C Series Pneumatic Push-in Fittings

APOC-C Series Pneumatic Push-in Fittings

The APOC-C series consists of pneumatic push-in fittings. The catalog includes APLC-C, APLL-C, APB and other configurations for quickly connecting tubing to threaded ports in automated pneumatic systems. They accommodate tubing with outside diameters of Φ3, Φ4 and Φ6 mm, with thread sizes including M3×0.5, M5×0.8, M6×1.0, R1/8, G1/8 and G1/4. Straight, elbow and branch configurations are available. The table provides overall and mounting dimensions such as L1, L2, L3, ΦD1 and φ to facilitate selection and layout. These fittings are suitable for tubing connections to pneumatic actuators, valve manifolds and various pneumatic control circuits.

AP-C Series Pneumatic Push-in Fittings

AP-C Series Pneumatic Push-in Fittings

The AP-C series is a family of push-in fittings for pneumatic lines. The C-suffix range is divided by configuration into subseries including APM-C, APV-C, APU-C, APE-C, APY-C and ASC-C. It includes straight, reducing, tee and threaded fittings for quick connection and disconnection of pneumatic tubing to cylinders, solenoid valves and air preparation units. The fittings accommodate tubing with outside diameters of Φ3, Φ4 and Φ6 mm. Thread sizes include M3×0.5, M5×0.8, M8×1, M10×1 and M12×1; straight fittings with fine-pitch male threads from M8×1 to M12×1 are also available. The catalog provides outside diameters ΦD, ΦD1, ΦD2, Φd and Φd1 and length dimensions such as L and L1~L4 for each subseries. It also lists reducing tees such as APY04-03C and APY06-04C and tube-to-thread combinations such as ASC03-M5C and ASC06-M3C, making it easier to select fittings by tube diameter and thread size.

APV-C Series Equal-Diameter Straight Push-in Fittings

APV-C Series Equal-Diameter Straight Push-in Fittings

The APV-C series consists of equal-diameter straight push-in pneumatic fittings for quickly connecting two pneumatic tubes with the same outer diameter. The sizes listed on this page cover tube outer diameters of 3 mm, 4 mm, and 6 mm, with corresponding body outer diameters of 7.3–11.3 mm, overall lengths of 12–15.6 mm, and insertion depths of 5–6.8 mm. The push-in locking mechanism allows easy connection and disconnection. These fittings are suitable for automated equipment, pneumatic control circuits, and compressed air lines. Select a model that matches the tube outer diameter, and check the operating pressure and medium compatibility.

APU-C Series Pneumatic Push-in Fittings

APU-C Series Pneumatic Push-in Fittings

The APU-C series consists of miniature pneumatic push-in fittings (Type C). Together with the APM-C, APV-C, APO-C, APY-C and ASC-C subseries shown on the same page, they form a family of miniature tube fittings organized by tube outside diameter. They accommodate tube outside diameters of Φ3, Φ4 and Φ6 mm and are available with metric threads including M3×0.5, M5×0.8, M8×1, M10×1 and M12×1. Reducing sizes such as APY04-03C, APY06-04C and APG04-03C are also available. The catalog defines each model by dimensions including ΦD (tube outside diameter), ΦD1/ΦD2 (outside diameter), Φd/Φd1 (inside diameter), L/L1/L2/L3/L4 (section lengths) and M (thread), allowing direct selection based on installation space and tube diameter. These fittings provide quick connections between tubing and cylinders, solenoid valves and air preparation components in automated pneumatic circuits. Installation requires no tools, enabling fast assembly and maintenance.

AP-C Series Miniature Connectors

AP-C Series Miniature Connectors

The AP-C series consists of miniature precision components for connecting, adapting, and mounting. The catalog groups them into subseries including APM-C, APV-C, APU-C, APE-C, APY-C, and ASC-C. Body diameters are primarily available in ΦD 3, 4, and 6 mm, with M3×0.5, M5×0.8, M8×1, M10×1, or M12×1 threaded interfaces. Some versions have through-holes, such as Φ3.2 and Φ3.5, for screw mounting. The catalog defines each version using overall and mounting dimensions such as ΦD, ΦD1, ΦD2, Φd, Φd1, L, L1~L4, and φ. Lengths range from approximately 8.5~34 mm, accommodating adapter and fastening requirements in compact mechanisms. To select a product, first choose the subseries and basic model by body diameter and thread size, then check that mounting dimensions such as L and L1 fit the available space. Material, surface treatment, and allowable load are not specified in the catalog.

AP-C Series Miniature Pneumatic Tube Fittings

AP-C Series Miniature Pneumatic Tube Fittings

The AP-C series comprises push-in fittings for miniature pneumatic and fluid lines, compatible with tubing of Φ3, Φ4 and Φ6 mm outside diameter. Connection thread sizes include M3×0.5, M5×0.8, M8×1, M10×1 and M12×1. The series is divided by function and configuration into APM-C (threaded connection, 10/12/14 mm hex across flats), APV-C and APU-C (straight, equal-diameter or reducing configurations), APE-C and APY-C (branch/Y configurations, including Φ4-Φ3 and Φ6-Φ4 reducing combinations), and ASC-C (female-threaded connection) subseries. The catalog provides complete dimensional specifications, including ΦD (tube diameter), ΦD1/ΦD2 (mating outside diameter and through-hole diameter), L/L1~L4 (individual section lengths), and M (thread size), allowing users to select fittings directly by tube diameter and thread size.

MPV Series Miniature Pneumatic Fittings

MPV Series Miniature Pneumatic Fittings

The MPV series comprises miniature pneumatic line fittings. This catalog page covers four body types: MPV straight fittings, MPLJ elbows, MPGJ extended elbows, and MPP plugs. Compatible tube outside diameter D is available in seven sizes: 4, 6, 8, 10, 12, 14, and 16 mm. Body outside diameter (or release ring outside diameter) D1 is 8.5~21.5 mm, and overall length L is 17~40.5 mm. For elbows, dimensions L1 and L2 are also provided in two directions (L1 18~45.5 mm, L2 17~30.8 mm) to help assess installation clearances and tubing routes in confined spaces. The compact design requires little installation space, making these fittings suitable for low-flow pneumatic connections and line-end plugging in applications with dense tubing, such as molds, electronic equipment, and fixtures. When selecting a model, match the model suffix to tube outside diameter D (for example, 04 corresponds to D4) and check dimensions D1, L, L1, and L2 against the available installation space.

MPJ Series Miniature Push-in Fittings

MPJ Series Miniature Push-in Fittings

The MPJ series comprises miniature push-in fittings for pneumatic tubing in factory automation systems. The catalog includes the MPV, MPLJ, MPGJ, and MPP subseries, for quick connections between tubes with outside diameters of 4, 6, 8, 10, 12, 14, and 16 mm and for connecting tubing to threaded ports. Specifications are given by dimensions including D (tube outside diameter), D1 (body outside diameter), L (length), L1, and L2. D ranges from 4~16 mm, while D1 increases with D, ranging from 8.5~21.5 mm. The MPV subseries has an overall length of 17~40.5 mm. The MPLJ subseries specifies L, L1, and L2 dimensions, with an overall length of 31.7~42.5 mm. The MPGJ subseries uses a two-part body size–tube diameter code, such as MPGJ08-04 or MPGJ10-08. The MPP subseries has an overall length of 30~50 mm and a thread/port length of 5~10 mm. To install, simply insert the tube until it locks; press the release ring to remove it. These fittings are suitable for tubing connections between cylinders, solenoid valves, and air preparation units.

MPGJ Series Miniature Tube Fittings

MPGJ Series Miniature Tube Fittings

The MPGJ series consists of miniature tube fittings. Models are designated as “MPGJ + body size - port size”; for example, MPGJ08-04 denotes an 08 body with a 04 port. Other common combinations include MPGJ08-06, MPGJ10-08, and MPGJ12-10. The catalog provides key overall and mating dimensions for each model in a dimension table: D is the nominal diameter of the mating end (4/6/8/10 mm), D1 is the corresponding outside diameter or across-flats dimension (8.5/11.5/13.5/15.5 mm), L is the mating section length (6/8/10/12 mm), L1 is the overall length (33/37.5/43.7/45.5 mm), and L2 is the overall dimension in the other direction (21/22/26/25 mm). Their compact size makes these fittings suitable for adapters, transitions, and branch connections in space-constrained miniature pneumatic or fluid piping systems. Select a size by checking the nominal tube diameter and available installation space against dimensions such as D, D1, and L1, and note the pairing of body and port sizes. The series covers common sizes from 04~12 and can meet the needs of compact equipment and fixtures

KN-PC-C Straight Miniature Push-in Fitting

KN-PC-C Straight Miniature Push-in Fitting

The KN-PC-C straight miniature push-in fitting is part of the miniature pneumatic quick-connect series, designed for quick connection and disconnection of small-diameter pneumatic tubing and threaded ports in pneumatic circuits. Its brass body has an electroless nickel-plated surface, preventing the release of copper ions and making it suitable for pneumatic control applications with cleanliness requirements. It accepts tubing with outer diameters of Φ3.18, Φ4 and Φ6 mm (corresponding inner diameters of Φ2.18, Φ2.5 and Φ4 mm) and operates at pressures from 0~1.0 MPa. Thread sizes include M3×0.5, M5×0.8 and R1/8, with options selectable according to tubing size and mounting thread. The same series also includes the KN-PL-C miniature elbow quick-connect fitting. The same catalog page lists KN-PEG all-brass reducing tees, BXGKN-PEG stainless steel reducing tees, and male-threaded fittings such as KN-PC-G and KN-PL-G, which can be combined to create a complete pneumatic piping connection solution.

KN-PL-C Series Miniature Push-to-Connect Elbow Fittings

KN-PL-C Series Miniature Push-to-Connect Elbow Fittings

The KN-PL-C series consists of miniature push-to-connect elbow fittings for tubing with outside diameters of Φ3.18, Φ4, and Φ6, with connection threads of M3×0.5, M5×0.8, and R1/8. The operating pressure is 0~1.0 MPa. The brass body has an electroless nickel-plated finish that minimizes copper ion release, making it suitable for pneumatic lines with cleanliness requirements. The elbow design allows airflow to change direction in compact spaces and is commonly used in automation equipment, small cylinders, and precision pneumatic circuits. Select the fitting to match the tubing outside diameter and connection thread size.