Flexible Coupling

BF4 Series Flexible Coupling (Taper-Lock Type)

BF4 Series Flexible Coupling (Taper-Lock Type)

The BF4 Series flexible coupling features a taper-lock design. Slots in the locking sleeve allow it to clamp securely onto the shaft. The intermediate elastomer is made of polyurethane and is available in three hardness grades and colors. These couplings provide zero backlash at low torque and function as flexible couplings at high torque. They are oil-resistant and electrically insulating, with identical operating characteristics in clockwise and counterclockwise rotation. Their exceptional torsional flexibility absorbs vibration and compensates for radial and angular misalignment. The hubs are made of aluminum alloy and are available with a range of standard bore sizes (8–18 mm, 12–24 mm, 15–28 mm, and 18–40 mm); custom bores and keyways can also be machined on request. Rated torque: 15–140 N·m; maximum torque: 30–280 N·m; allowable eccentricity: ±0.2 mm; allowable angular misalignment: ≤1°; maximum speed: 3,800 rpm.

SGC Series Flexible Coupling · Oldham Type

Oldham type.

LLA Series Frameless Tire Coupling

LLA Series Frameless Tire Coupling

Tire couplings are designed to connect two coaxial shafts and transmit torque from 10 to 20,000 N·m. They provide excellent vibration damping and compensate for shaft misalignment. Axial and radial displacement is limited to 2% of the tire body's maximum outer diameter, while angular displacement is no more than 6°. The operating temperature range is -20 to +80°C.

JM Series Column-Type Diaphragm Coupling

JM Series Column-Type Diaphragm Coupling

The listed features include: nominal torque of 25–10000 N·m; operating temperature of 20–250℃; no lubrication required and suitable for use in corrosive media. Compared with gear couplings, it has a simple structure, is easy to manufacture and maintain, and is suitable for high-speed operation. It is easy to assemble, disassemble, and inspect; during disassembly, the driving and driven parts of the transmission system can be disengaged without axial movement. The page states that it is used in industries such as metallurgy, steel rolling, mining, chemicals, shipbuilding, pumps, and fans.

BF5 Series Flexible Couplings

BF5 Series Flexible Couplings

Intermediate elastomer coupling, assembled by press-fitting the polyurethane sleeve into the hubs on both sides. It has the same rotational characteristics in clockwise and counterclockwise directions. Axial slots ensure concentricity; slotting does not alter the jaw profile and helps maintain balance. The elastomer absorbs vibration, parallel and angular misalignment, and axial movement; it is oil-resistant and electrically insulating. Elastomers are available in 3 different hardnesses and colors. The series is described as providing smooth power transmission, with a length approximately 1/3 that of a conventional coupling.

HR Series Jaw Coupling

HR Series Jaw Coupling

Manufactured to general standards for guaranteed quality. Made from premium cast iron for long-lasting durability. The rubber elastic sleeve offers high resilience and vibration resistance, excellent shock absorption, and reliable power transmission.

GE Series High-Damping Extended Type

GE Series High-Damping Extended Type

DKAB Series Stepped-Clamp Diaphragm Coupling

DKAB Series Stepped-Clamp Diaphragm Coupling

High torque, high rigidity, and high sensitivity; zero backlash; identical performance in clockwise and counterclockwise rotation. The two stainless steel diaphragms compensate for radial, angular, and axial misalignment; the page also notes that “the DKAB type cannot compensate for radial misalignment.”

DPC21 Set-Screw Coupling, DPC31 Screw-Clamp Coupling

DPC21 Set-Screw Coupling, DPC31 Screw-Clamp Coupling

The DPC21 is a set-screw coupling, while the DPC31 is a screw-clamp coupling. This series is made of stainless steel with a polished finish and uses cylindrical screws as fasteners. Features include high rigidity, making it suitable for servo motors; zero backlash; identical performance in clockwise and counterclockwise rotation; and compensation for radial, angular, and axial misalignment. The allowable values for eccentricity, angular misalignment, and axial displacement apply individually, so the allowable values are reduced when multiple types of misalignment occur simultaneously.

DPC31 Screw-Clamp Type

DPC31 Screw-Clamp Type

The DPC31 series features screw-clamp couplings made of polished stainless steel and fitted with socket head cap screws. They offer high rigidity and are suitable for servo motors, with zero backlash and identical performance in clockwise and counterclockwise rotation. They compensate for radial, angular, and axial misalignment. Since the allowable values for eccentricity, angular misalignment, and axial displacement are specified separately, the allowable values are reduced when multiple types of misalignment occur simultaneously.

F-Series Flexible Couplings

F-Series Flexible Couplings

F-series flexible couplings use elastic tire elements and are suitable for operating temperatures of approximately -50°C to +50°C. They offer fire resistance, antistatic properties, and enhanced heat and oil resistance. Available sizes include F40, F50, F60, F70, F110, and F120, as well as the F40-60 series. Types B, F, and H are available, with options for special bore configurations such as keyways, hexagonal bores, square bores, and splined bores. The catalog coding system identifies specific specifications, while product models are designated directly by size. When selecting a coupling, refer to parameters such as outside diameter, bore length, and bore size.

J-FLEX Rubber Gear Flexible Coupling

J-FLEX Rubber Gear Flexible Coupling

The J-FLEX rubber gear flexible coupling combines a rubber gear elastomer with metal gears. It is available with two elastomer types: Type J, featuring a black rubber gear elastomer, and Type H, featuring a red gear elastomer. The rubber gear elastomer has a hardness of 90° ± 2° and is made from durable, heat- and oil-resistant high-strength rubber, using grade 7 chlorosulfonated polyethylene (CSM) and styrene-butadiene rubber (SBR). The metal gears are made of 45# steel and finished with paint. Non-standard configurations and special materials can be custom ordered to meet specific operating requirements. Suitable for drive applications requiring shock absorption, vibration damping, and compensation for shaft misalignment.

MH-Type Core Elastic Coupling

MH-Type Core Elastic Coupling

The MH-type core elastic coupling is a flexible coupling with a certain degree of misalignment compensation. It is suitable for operating conditions where the two shaft centerlines are slightly offset, and provides cushioning and vibration-damping performance. The coupling requires no lubrication and can operate in dusty or damp environments. Its simple design makes maintenance easy; however, replacing the elastic element requires moving one half-coupling and the main shaft. The operating temperature range is -20 to +70°C, and the rated torque it transmits is 6.3 to 8,000 N·m.

GT High-Damping Standard Type

GT High-Damping Standard Type

The GT High-Damping Standard Type coupling features a fully integrated construction, with high-damping rubber molded as one piece with the hubs at both ends to deliver excellent vibration damping. Its optimized damping and rigidity support high-gain servo motor operation and shorten settling time. It also suppresses speed fluctuations in stepper motors and reduces residual vibration during positioning, improving production efficiency and product quality. Models with outer diameters of 15–56 mm use fluorinated high-damping rubber, offering excellent resistance to heat, oil, and chemicals. Three versions are available: standard GT, extended GL, and compact GS. Product dimensions: outer diameter 15–68 mm, length 23–75 mm, bore diameter 3–35 mm; rated torque 1.1–65 N·m; maximum speed 9,000–42,000 rpm; allowable eccentricity 0.15–0.2 mm; allowable angular misalignment 1.5°; allowable axial misalignment ±0.2 to ±0.3 mm; weight 9–473 g. The coupling is made of aluminum alloy with an anodized finish and is supplied with socket head cap screws.

GLE Series Flexible Couplings

GLE Series Flexible Couplings

The GLE Series high-damping extended couplings feature an integrated design in which high-damping rubber is molded together with the hubs at both ends, delivering excellent vibration-damping and rigidity performance. Their optimized design enables high-gain servo motor operation and shorter settling times, while suppressing stepper motor speed fluctuations and residual positioning vibration to improve production efficiency and product quality. Available in outside diameters of 15–56 mm, they use high-damping fluoroelastomer with excellent heat, oil, and chemical resistance. Standard GT, extended GL, and compact GS types are also available. These clamp-type couplings are made of aluminum alloy with an anodized surface finish and supplied with socket head cap screws. A range of outside diameter × length sizes is available: GLE-15×30, GLE-19×34, GLE-25×42, GLE-30×42, GLE-34×44, and GLE-39×55. Rated torque: 0.5–13.5 N·m; maximum speed: 16,000–42,000 rpm; allowable eccentricity: 0.15–0.2 mm; allowable angular misalignment: 1.5°; allowable axial misalignment: ±0.2 to ±0.3 mm. The bore diameters at each end can be freely combined with H7/H8 tolerances, and custom specifications are available.

GS High-Damping Compact Type

GS High-Damping Compact Type

The GS High-Damping Compact Coupling is a shorter, more compact version of the GT high-damping resistant coupling. It features a fully integrated construction, with high-damping rubber molded as one piece with the hubs at both ends. Its optimized balance of vibration damping and rigidity enables high-gain servo motor operation and shorter settling times. It helps reduce speed fluctuations when driving stepper motors and suppresses residual vibration during positioning, improving productivity and product quality. Available in outer diameters of 15–39 mm, it uses fluorinated high-damping rubber with excellent heat, oil, and chemical resistance. The standard GT, extended GL, and compact GS types are all standardized. A wide range of bore sizes is available, and custom specifications can be made to order. Key specifications: outer diameter 15–39 mm; rated torque 0.5–7 N·m; maximum speed 16,000–42,000 rpm; allowable eccentricity 0.15–0.2 mm; allowable angular misalignment 1.5°; allowable axial misalignment ±0.2–0.3 mm.

GX Series High Vibration-Damping Flexible Couplings

GX Series High Vibration-Damping Flexible Couplings

GX Series flexible couplings feature a fully integrated design combining hubs on both sides with high vibration-damping rubber. They are ideal for high-response control motors, enabling high-precision positioning and shorter settling times. The range includes the GX Standard Type and GXT High-Damping Standard Type, with outer diameters of 15–56 mm and overall lengths of 23–60 mm. Bore sizes can be customized. A variety of specifications are available, with rated torques of 1.1–35 N·m, maximum speeds of 11,000–42,000 rpm, allowable parallel misalignment of 0.15–0.2 mm, an allowable angular misalignment of 1.5°, and allowable axial misalignment of ±0.2–0.3 mm. Made of alloy steel, with customizable surface treatments. Widely used in automation equipment and servo motor connections, and in other applications requiring high precision and vibration damping.

GXT High-Damping Standard Flexible Coupling

GXT High-Damping Standard Flexible Coupling

A fully integrated flexible coupling featuring hubs on both sides bonded with high-damping rubber. Designed for high-response control motors, it enables highly precise positioning and shorter settling times. The bore is machined to standard H7/H8 tolerances; custom specifications are available. A range of sizes is offered, with outer diameters of 15–56 mm and lengths of 23–60 mm.

GXC High-Damping Standard Type

GXC High-Damping Standard Type

The GXC Series High-Damping Standard Type Coupling features a fully integrated construction combining hubs on both sides with high-damping rubber. Designed for high-response control motors, it enables high-precision positioning and shorter settling times. Available in a range of outer diameters and lengths, the bore diameter can be selected as required. Special bore configurations, including keyways, hexagonal bores, square bores, and splined bores, can also be machined. Key specifications include a rated torque of 1.1–35 N·m, maximum speed of 11,000–420,000 rpm, allowable eccentricity of 0.15–0.2 mm, allowable angular misalignment of 1.5°, and mass of 8–276 g.

GLC High-Damping Extended Type

GLC High-Damping Extended Type

The GLC series is a high-damping, extended-type flexible coupling with a fully integrated design that combines hubs on both sides with high-damping rubber. It is suitable for high-response control motors, enabling high-precision positioning and shorter settling times. Model numbers begin with GLC, followed by the outside diameter × length. For example, GLC-15×30 indicates an outside diameter of 15 mm and a length of 30 mm. Various bore diameter combinations are available, with bores machined to H7/H8 tolerances. The coupling provides excellent compensation for parallel, angular, and axial misalignment.

GXS Series Flexible Couplings

GXS Series Flexible Couplings

The GXS series features compact flexible couplings with high vibration-damping capability. Their fully integrated design combines hubs on both sides with high-damping rubber. Designed for high-response control motors, they enable high-precision positioning and reduce settling time. Made of aluminum alloy with an anodized finish (custom specifications available). The bore sizes at the two ends can be freely combined, from smaller to larger, and use H7/H8 tolerances; custom specifications are available. A wide range of sizes is offered: outer diameters of 15–39 mm, lengths of 18–40 mm, maximum bore diameters of 6–20 mm, rated torques of 0.5–7 N·m, maximum speeds of 16,000–42,000 rpm, allowable eccentricity of 0.15–0.2 mm, angular misalignment of 1.5°, and axial misalignment of ±0.2 to ±0.3 mm. Suitable for precision drive systems using servo motors, stepper motors, and more.

GSC High-Damping, Compact Type

GSC High-Damping, Compact Type

The GSC Series high-damping, compact flexible couplings feature a fully integrated design in which the hubs on both sides are joined by high-damping rubber. Suitable for high-response control motors, they enable precise positioning and shorter settling times. This compact series is available in a range of models to suit different shaft diameters and torque requirements.

GSX Series Flexible Couplings

GSX Series Flexible Couplings

GSX Series flexible couplings feature a fully integrated design, with the two hubs bonded by high-damping rubber. They are suitable for high-response control motors, enabling high-precision positioning and shorter settling times. The couplings are semi-split clamp type, made of aluminum alloy with an anodized surface finish, and supplied with bolts. Custom designs and special materials are available for demanding operating conditions. Multiple sizes are offered, with outer diameters of 15–39 mm, lengths of 6.5–15.5 mm, rated torques of 0.5–3.3 N·m, and maximum speeds of up to 42,000 r/min. The bore diameters at the two ends can be freely selected, from smaller to larger, and are machined to standard H7/H8 tolerances.

NLP Nylon Gear Sleeve

NLP Nylon Gear Sleeve

The NLP nylon gear sleeve is an internally toothed flexible coupling designed for axial and linear drive applications. It accommodates large axial and radial displacements as well as angular misalignment. Its advantages include a simple design, easy maintenance and assembly, low noise, minimal transmission-efficiency loss, and a long service life. The gear sleeve is made of nylon, and the bore diameters at either end can be freely combined, from smaller to larger sizes. The bores are machined to standard H7/H8 tolerances, and custom specifications are available on request. Standard models range from NLP-1 to NLP-8, with various tooth counts, outside diameters, heights, and module sizes to meet a wide range of transmission requirements.

SGXC Series Couplings

SGXC Series Couplings

The SGXC series features clamp-type flexible couplings with a compact design. They have an outer diameter of 12–32 mm, a length of 14.9–33.3 mm, and a maximum bore diameter of 5–16 mm. Rated torque ranges from 0.2 to 2.8 N·m, and maximum speed reaches 52,000 rpm. They offer low inertia and static torsional stiffness of 9–190 N·m/rad. Permissible eccentricity is 0.6–2 mm, angular misalignment is 2°, and axial displacement is ±0.1 mm, making them suitable for precision power transmission. Standard bore sizes range from 3 to 16 mm. During installation, pay attention to the orientation of the D-cut shaft.

SEI Series Couplings

SEI Series Couplings

The SEI Series features clamp-type couplings for drive connections with shaft diameters of 12–40 mm. During installation, make sure the flat on a D-cut shaft does not contact the slit, to prevent damage to the coupling. The numbers following the SEI series code indicate the outer diameter or length range, for example, SEI12–40.

SEC Series Jaw Couplings

SEC Series Jaw Couplings

SEC Series Jaw Couplings are machined from a single piece of high-strength aluminum alloy to achieve zero rotational backlash. The parallel-cut leaf springs accommodate eccentric, angular, and axial misalignment. Two lengths are available: standard SEC and short SEC-S. The fixed clamping design makes installation and removal easy. Suitable for servo motors, stepper motors, and general-purpose motors. The body is anodized, and the clamping screws are made of SCM435 steel with a blackened finish and a strength grade of 12.9.

SEC Series Flexible Couplings

SEC Series Flexible Couplings

SEC Series flexible couplings feature a clamping design and are suitable for precision power transmission applications, such as servo motors. The product range includes standard models (SEC-12 to SEC-32) and short models (SEC-125 to SEC-325), with outer diameters of 12–32 mm and lengths of 14–41 mm. Rated torque is 0.4–4 N·m, maximum torque is 0.8–8 N·m, and maximum speed is 15,000–40,000 rpm. Permissible radial misalignment is 0.02–0.15 mm, angular misalignment is 1–2°, and axial compensation is ±0.1–±0.4 mm. The standard bore range is 3–16 mm. Shaft diameter tolerances of h6 or h7 are recommended.

SEI Series Couplings

SEI Series Couplings

SEI Series couplings are machined as a single piece from high-strength aluminum alloy, providing zero backlash. The parallel-cut leaf springs accommodate parallel, angular, and axial misalignment. Available in two lengths: the standard SEI and the shorter SEI-S. Secured with set screws. Suitable for servo motors, stepper motors, and general-purpose motors. The body is made of 2024 aluminum alloy with an anodized finish; the set screws are made of SCM435 steel with a black-oxide finish. Example model: SEI-25-10×10 indicates a 25 mm outer diameter, a length of 31 mm, and D1 and D2 bore diameters of 10 mm each.

SEI Series Flexible Couplings

SEI Series Flexible Couplings

SEI series flexible couplings feature a clamping design and are suitable for low- to medium-torque applications. The range includes standard models (SEI-12 to SEI-32) and short models (SEI-125, SEI-165, SEI-20S, SEI-25S, and SEI-32S). Bore diameters range from 3 to 16 mm; rated torque is 0.4–4 N·m, maximum torque is 0.8–8 N·m, and maximum speed is 15,000–40,000 rpm. They offer good eccentricity compensation and angular misalignment capability, with static torsional stiffness of 45–1,100 N·m/rad. Lightweight and compact, they are suitable for precision drive applications such as stepper and servo motors.

SSEC Series Clamping Couplings

SSEC Series Clamping Couplings

SSEC Series Clamping Couplings feature a body made of SUS303 stainless steel in its natural finish or blackened SCM435 alloy steel (grade 12.9). A parallel-cut leaf spring transmits torque, delivering zero backlash and high torque capacity while accommodating parallel, angular, and axial misalignment. Available in standard and shortened lengths. The clamping connection is secure and easy to install or remove. Example model code: SSEC-25S-10X10, where SSEC is the series, 25 indicates a 25 mm outer diameter, S is the length code (for a 25 mm length), and 10 indicates the bore size (both D1 and D2 are 10 mm). Select the outer diameter, length code, and bore sizes at both ends to suit your requirements.

SSEC Series Couplings

SSEC Series Couplings

The SSEC series consists of flexible couplings secured with clamping screws, designed for small-shaft drives. They offer high torque, high-speed operation, and low inertia. Standard models have an outer diameter of 12–32 mm, a length of 14–31 mm, a rated torque of 0.4–4 N·m, and a maximum speed of 15,000–40,000 rpm. Available in standard, short, and S-type configurations to suit different installation spaces, they are widely used in precision drive applications such as stepper and servo motors.

SSEI Series Flexible Couplings

SSEI Series Flexible Couplings

The SSEI Series flexible coupling is a high-precision, high-rigidity coupling designed for precision drive systems such as servo motors and stepper motors. It features a jaw-style elastomer that compensates for radial, angular, and axial misalignment while absorbing vibration and shock. The range includes multiple sizes in standard and short versions (S suffix), with outside diameters from 12 mm to 32 mm and a maximum shaft bore of 16 mm. Rated torque ranges from 0.4 to 4 N·m, maximum torque from 0.8 to 8 N·m, and maximum speed reaches 40,000 rpm. It uses threaded locking for easy installation. Applications include automation equipment, machine tools, and robotics.

LF Jaw Coupling Series

LF Jaw Coupling Series

The LF jaw coupling series uses a flexible spider insert to provide zero-backlash torque transmission, vibration absorption, compensation for parallel and angular misalignment, and electrical insulation. Clamp and set-screw mounting options are available. Applications include XY stages, indexing tables, machine tools, injection molding machines, handling equipment, and dispensing machines. Typical outside diameters range from D14 to D90, overall lengths from L22 to L126, and maximum bore sizes from 6 to 60 mm. Rated torque ranges from 1.2 to 9 N·m, maximum speed from 15000 to 40000 RPM, allowable parallel misalignment from 0.1 to 0.15 mm, and allowable angular misalignment is 1°. The elastomer is available in 3 hardness options.

L Series Jaw Couplings with Locking Assemblies

L Series Jaw Couplings with Locking Assemblies

The L series jaw couplings use a locking assembly (clamping) design and are suitable for connecting servo and stepper motors. The fastening type provides zero-backlash torque transmission at low torque, while the easy-assembly type simplifies installation and removal of the shaft sleeve. The elastomer absorbs vibration, eccentricity and angular misalignment and provides electrical insulation. The elastomeric spider is available in 3 hardness grades, allowing torque capacity and misalignment compensation to be selected for the operating conditions. Models cover outer diameter D 55~95 mm, length L 78~126 mm, bore diameter D1-D2 12~50 mm, rated torque 34~220 N·m, maximum speed 7200~13000 rpm, allowable eccentricity 0.02 mm, angular misalignment 1°, axial deviation 0.8~1 mm, and weight 320~1800 g.

LR Series Wire-Wound Couplings

LR Series Wire-Wound Couplings

The LR series wire-wound flexible couplings are part of the C-KING coupling range and are suited to low-power transmission applications involving servo motors, stepper motors, lead screws and encoders. Six sizes are available, with outside diameters D15~D40 and lengths L20~L45. Maximum bore sizes range from 8~28 mm, rated torque from 0.5~6 N·m, maximum torque from 1~12 N·m and maximum speed from 12000~30000 rpm. Allowable eccentricity is 0.05 mm and allowable angular deviation is 0.5°. The listed models include LR-B and LR-D. The technical specifications table provides torque, speed, moment of inertia, weight and other data for quick selection.

FCL Series Flexible Pin and Bush Couplings

FCL Series Flexible Pin and Bush Couplings

FCL series flexible pin and bush couplings use pins fitted with elastic bushes. Their simple design makes installation and replacement easy. During operation, they dampen vibration from mechanical transmission and absorb shocks caused by uneven motion. They accommodate axial, radial and angular misalignment between shafts, significantly improving operating quality and stability. Allowable misalignment: radial displacement 0.2~0.6mm, angular deviation 0°30'~1°30'. They are widely used in lightly loaded, motor-driven power transmission systems of small and medium capacity, including reducers, cranes, compressors, textile machinery, pumps and gearboxes. Models range from FCL-90~FCL-400, with outer diameters of 90~400mm, pin numbers F1~F7, bores of 8~40mm, maximum speeds of 1600~4000rpm, maximum torques of 4~3550N·m and weights of 1.54~127.70kg.

MH Series Flexible Jaw Couplings

MH Series Flexible Jaw Couplings

Shenma Transmission MH series flexible jaw couplings consist of two jaw hubs and an intermediate rubber spider. They damp vibrations generated by mechanical transmission, absorb shocks caused by uneven motion, and compensate for radial and angular misalignment between shafts. They are widely used in small and medium-power drive systems for gear reducers, cranes, compressors, textile machinery, pumps and variable-speed drives. The range covers outer diameters of 55~230mm, hub lengths of 38~150mm, maximum machinable bores of 20~85mm, minimum bores of 9~50mm, overall lengths of 57~233mm, rubber spider outer diameters of 26~110mm and a rubber gap of 3mm. Maximum speeds range from 3600~6000rpm, typical torque (listed in the source as “常用距规”) from 0.4~65N·m, and individual weights from 0.6~42.0kg. The source specifies standard radial misalignment compensation of 0.2mm and angular compensation of 0.3°. Models MH-55~MH-230 are selected by outer diameter. Dynamic balance must be checked when operating near the maximum permissible speed.

Shenma S-Type Curved-Tooth Gear Coupling

Shenma S-Type Curved-Tooth Gear Coupling

The Shenma S-type curved-tooth gear coupling is a two-piece coupling made from nylon and steel. It is maintenance-free, compensates for axial, radial and angular misalignment, and is easy to assemble by axial insertion. Finished bore tolerances are ISO H7, and keyway width tolerances are JS9 in accordance with DIN6885/1. Tapered and imperial bores are also available. Models range from S14 to S65, with outer diameter D of 33~110 mm, bore diameter d of Φ8~Φ16 mm, length L of 23~55 mm, and 20~50 teeth. The series is suitable for power transmission connections in a variety of mechanical and hydraulic applications.

Shenma Nylon Internal Gear Coupling

Shenma Nylon Internal Gear Coupling

The Shenma nylon internal gear coupling features an internal gear ring that meshes with externally toothed hubs. Elastic deformation of the nylon gear ring compensates for radial, angular and axial misalignment between the two shafts. The coupling reduces vibration and noise, requires no lubrication or maintenance, and is suitable for general mechanical drives with low to medium torque. The catalog provides complete mounting dimensions by size: sizes range from 1m×32 to 3m×36, with ring diameter (B) 42~140 mm, ring length (C) 38~74 mm, step diameter (D) 26~98 mm, individual gear thickness (E) 32~56 mm, gear bore d1/d2 8~14 mm, and overall length (A) 67~117 mm. All components are available separately. Please inquire about additional in-stock items not listed in the catalog table.

L Series Couplings

L Series Couplings

L series couplings are flexible couplings designed for low- to medium-power precision drives. They are commonly used to connect servo and stepper motors to ball screws, encoders, and gearboxes, compensating for shaft misalignment and absorbing shock. The series comprises 10 sizes, from L-035 to L-150, covering precision low-torque to medium-torque applications. Key specifications include maximum torque of 0.15~30 N·m, normal torque of 0.05~10 N·m, maximum speed of 2000~6000 rpm, outside diameter D of 16.10~95.28 mm, overall length L of 20.15~112.95 mm, mounting dimensions L1 and L2, and bore diameter d of 4~46 mm. Each size is available with different bore combinations to suit various motor and screw shaft diameters. Select a model from the table based on the required transmitted torque, speed, and bore sizes, and do not exceed the maximum speed. The same page also lists CL variants with the same dimensions as the L type, slightly different moments of inertia and weights, and sizes extending to CL-225, for different stiffness and damping requirements.

GR Series Star Couplings

GR Series Star Couplings

GR series star couplings use a star-shaped elastomer as a cushioning element to provide a flexible connection between servo or stepper motors and ball screws or drive shafts. They compensate for radial, angular, and axial misalignment and absorb vibration. The catalog covers GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, and GR100 sizes, with dimensions including maximum outer diameter, bore length, small end diameter, and overall length to help select the right coupling for the shaft diameter and available installation space.

SRJ Series Flexible Couplings

SRJ Series Flexible Couplings

SRJ series flexible couplings (elastic couplings) feature aluminum alloy hubs and an engineering plastic cushioning element. They provide a flexible connection between servo motors and ball screws or gear reducers, compensating for radial, angular, and axial misalignment while absorbing vibration and shock. Five sizes are available, with outer diameters of 20/30/40/55/65 mm, lengths of 30~90 mm, and maximum bore diameters of 10~38 mm. Standard bores are available in sizes from 4~38 mm with an H8 tolerance. The bore diameter at each end can be specified separately (e.g., SRJ-30C-6×8). Rated torque is 5~160 N·m, maximum torque is 10~320 N·m, maximum speed is 4700~15200 min⁻¹, static torsional stiffness is 51~3430 N·m/rad, dynamic torsional stiffness is 151~10291 N·m/rad, and weight is 8.5 g~250 g. They are suitable for high-speed, high-precision, zero-backlash positioning applications.

BF Series

BF Series

The BF Series includes flexible couplings and support units. The flexible couplings feature aluminum-alloy hubs and a polyurethane elastomer, secured with clamping screws. They have zero backlash, absorb vibration, and compensate for radial and angular misalignment, making them suitable for low-torque applications in confined spaces. The support units are BF-type units designed to secure the ends of ball screws and are available for shaft diameters from 8 to 40 mm. The couplings come with elastomers in three different hardnesses and perform identically in clockwise and counterclockwise rotation.

SJM Keyed Double-Diaphragm Flexible Coupling

SJM Keyed Double-Diaphragm Flexible Coupling

The SJM keyed double-diaphragm flexible coupling uses a keyed connection for high strength and load capacity. Its bolts are fitted into reamed holes with a close fit, eliminating play and ensuring a quick response. A protection system extends service life, while the coupling offers strong impact resistance and vibration damping with low additional bending moments. It is highly adaptable, provides smooth power transmission, and can operate in harsh environments. Energy-efficient and environmentally friendly, it offers high efficiency, good value compared with gear couplings, excellent vibration damping, and quiet operation. The product is made of 45# steel. Surface finishes are available in black oxide or chrome plating, and the coupling comes with set screws. A standard black oxide finish is typically used. Custom designs to non-standard specifications and special-material options are available to meet the needs of demanding operating conditions.

JMJ Flexible Diaphragm Coupling

JMJ Flexible Diaphragm Coupling

The JMJ flexible diaphragm coupling is a high-performance flexible coupling that transmits torque through flexible diaphragms and compensates for axial, angular, and radial misalignment. It has a nominal torque range of 25–100,000 N·m and operates at temperatures from −20 to +250°C. It requires no lubrication and can be used in corrosive environments. Compared with gear couplings, it has a simpler design, is easier to machine, produces less vibration, operates quietly, and is suitable for high-speed applications. It is widely used in metallurgy, steel rolling, mining, chemicals, shipbuilding, pumps, fans, and other industries. Available materials include steel and stainless steel, with surface treatments such as nickel plating and zinc plating. Bore diameters range from 14 to 300 mm, and custom non-standard bores are available on request.

DFC Diaphragm Coupling

DFC Diaphragm Coupling

The DFC series features high-strength aluminum alloy diaphragm couplings with an anodized surface and cylindrical screw locking. Designed for high torque, high rotational speeds, low inertia, and zero backlash, they are suitable for precision drive applications such as servo and stepper motors. Models are specified by the combination of two shaft-hole diameters and are available in a wide range of bore sizes. Permissible misalignment: 0.02 mm parallel, 1° angular, and ±0.60 mm axial (±1.00 mm for some larger sizes).

DJ-A Star-Shaped Elastic Coupling

DJ-A Star-Shaped Elastic Coupling

The DJ-A Star-Shaped Elastic Coupling features a compact design and low inertia. Its engineering-plastic elastic element provides cushioning, vibration damping, and wear resistance. It operates at temperatures from -35°C to +80°C and requires no maintenance. The elastomer is constrained by the convex jaws, preventing internal deformation caused by impact and external deformation caused by centrifugal force. The jaws’ large concave surfaces keep surface pressure on the involute teeth very low, preventing wear or deformation even under overload. Axial plug-in installation is quick and convenient. The nominal torque listed in the table is for an elastomer hardness of 98 Shore A. Made of 45 steel with a blackened finish; includes locking set screws.