Pipe Plugs

MPP Series Pneumatic Tube Plugs
The MPP series consists of pneumatic tube plugs for sealing tubing or fitting ports to prevent air leaks and dust ingress. They can also be used to seal leaks during testing. Page 38 of the catalog lists three dimensions for each model: D, L, and L1. D is available in 4, 6, 8, 10, 12, 14, and 16 mm; L is the overall length, ranging from 30–50 mm; and L1 is the mating/insertion length, ranging from 5–10 mm. Seven sizes are available from MPP04 to MPP16, allowing selection by tube diameter. Material, sealing type, and working pressure are not specified on the page; the medium, pressure, and installation space should be considered when selecting a model.

PP Tube Plug
A PP tube plug is a plastic closure used at the ends of pneumatic and automation tubing. It seals ports to keep out dust, chips, and foreign matter, and can temporarily or permanently close unused tube connections. Typically made of polypropylene (PP), it is corrosion-resistant, electrically insulating, lightweight, inexpensive, and easy to insert and remove. It is suitable for use with pneumatic components such as nylon tubing, polyurethane tubing, and push-in fittings. This series is listed in the catalog under “PP Tube Plug.” Compatible tube diameters, dimensions, colors, and other details should be confirmed in the applicable specification table.

PPF Series Tube Caps
PPF series tube caps are accessories for pneumatic push-in (quick-change) fitting systems. They seal temporarily unused pneumatic tube ends or female-threaded fitting ports, preventing dust, cutting fluid, and oil contamination from entering the lines. They can also provide temporary seals during pressure testing or transport. They are commonly used with pneumatic fittings such as PP series tube plugs, PH/PHF series external hex fittings, and PYJ push-in tees. Most are made of plastic (PP/nylon), although metal versions are also available. Common compatible tube outside diameters include 4, 6, 8, 10, and 12 mm. Push-in installation requires no tools and allows repeated removal and reinstallation. Select the model primarily by the compatible tube outside diameter (ΦD) and installation method (push-in or male thread). The operating pressure and temperature ranges should match those of the associated push-in fitting to prevent seal failure due to excessive pressure or temperature. This page provides a catalog listing only; refer to the full page for detailed dimension tables.