Threaded Straight Pipe Fittings

KQ2LE Series Bulkhead Elbow Fitting
Mounting hole diameter = nominal locknut thread size + 0.5. Release ring colors: gray, blue, or black; plastic body colors: gray or black.

PCF-G Series Female Straight Connector - G Thread
Female straight connector, G thread.

KQ2W Series Extended Male Elbow Fittings
Release ring colors: gray, blue, or black; plastic body colors: gray or black.

PCF-N Series Female Straight Connector - NPT Thread

TO-PLL-G Series Extended Male Threaded Elbow Fitting

MSC Series Pneumatic Threaded Straight Fittings
The MSC series consists of threaded straight fittings for pneumatic lines. One end has a male thread (G parallel pipe thread or R tapered pipe thread) for connection to a valve body, cylinder, solenoid valve or piping; the other has a tube port compatible with pneumatic tubing with an outside diameter of 4, 6, 8, 12 or 16 mm. Models are designated “MSC+nominal size-Gxx”. MSC04, MSC06, MSC08 and MSC16 correspond to 4, 6, 8 and 16 mm sizes respectively, while MSC12 is a variant in the same series that also fits 6 mm tubing. Thread sizes include G1/8, G1/4, G3/8, G1/2, R1/4 and R1/2. Hex widths across flats range from 10~24 mm, overall length L from 35.5~51 mm, and thread length L1 from 7~15.5 mm. Section lengths L2 and L3 vary with the thread and tube diameter combination, making it easier to select a fitting for compact spaces. Suitable for quick connection and disconnection of compressed air lines.

PC Series Push-to-Connect Pneumatic Tube Fittings
PC series push-to-connect pneumatic tube fittings are available in a range of models to meet the connection needs of pneumatic tubing systems. Their push-to-connect design allows the tubing direction to be freely adjusted after installation. The fittings offer good rigidity and resistance to vibration and contamination. RUNC PT thread sealant provides a seal, while straight threads are sealed with standard O-rings. The catalog covers PC threaded straight fittings and PC-N threaded straight fittings with NPT threads. They accommodate tube outer diameters ΦD of 4, 6, and 16 mm and 5/32, 3/16, 1/4, 5/16, 3/8, and 1/2 inches. Thread sizes include M5, M6, R1/8, R1/4, R3/8, R1/2, R3/4, NPT1/8, NPT1/4, NPT3/8, and NPT1/2. Dimensions including L1, L2, O, and φ are also provided.

PC-N Series Push-in Pneumatic Fittings
PC-N series push-in pneumatic fittings are designed for pneumatic piping systems. The push-in mechanism locks the tube upon insertion, providing an airtight connection ready for airflow. After installation, the tube can still swivel freely for easy routing. The rigid fitting body resists vibration and prevents contaminants from entering. Tapered threads (R/PT, NPT) are coated with thread sealant for sealing upon installation, while straight threads (M5, M6) are sealed with standard O-rings. The series comprises PC threaded straight fittings (M5, M6, R1/8, R1/4, R3/8, R1/2, R3/4) and PC-N threaded straight fittings with NPT threads (NPT1/8, NPT1/4, NPT3/8, NPT1/2). Compatible tube outer diameters include 4, 6, 16 mm and 5/32, 3/16, 1/4, 5/16, 3/8, 1/2 inches. Key dimensions include tube outer diameter ΦD, thread size R, thread length L1, overall length L2, O dimension and bore diameter φ.

PC Series Threaded Straight Connectors
PC series threaded straight connectors are available in two configurations: PC-G (G thread) and PCG (M/R thread), for pneumatic tubing with an outer diameter of 4~16mm. They feature nickel-plated brass bodies and plastic release rings, offering corrosion resistance, reliable sealing, and easy connection and disconnection. Thread sizes cover G1/8~G1/2, M5~M6, and R1/8~R1/2. With a working pressure of 0~1.0MPa and a working temperature of -20~60°C, they are widely used for piping connections in pneumatic control systems, automation equipment, and machinery manufacturing.

PCF Series Straight Fittings with Parallel Threads (G Thread)
The PCF series comprises straight push-to-connect pneumatic fittings with a male G (BSPP) thread on one end and a push-in tube connection on the other. They connect pneumatic tubing, such as nylon or PU tubing, directly to components with G threads. The body is typically made of nickel-plated brass or engineering plastic, with nitrile rubber (NBR) seals. Suitable for tubing with an outside diameter of Φ4 mm, the fittings are available with G1/8, G1/4, G3/8 and G1/2 threads. With a working pressure of 0~1.0 MPa and a working temperature of 0~60 °C, they are suitable for general industrial pneumatic circuits. To install, simply push the tube in until it locks; to remove it, press the collet to release it. Select the model according to the tube outside diameter and the connection thread size.

PCG Series Round-Thread Straight Fittings
PCG series round-thread straight fittings are push-in fittings for pneumatic lines, presented in the catalog in three configurations: PC-G, PCG and PCF. One end has a push-in collet for pneumatic tubing with an outside diameter of Φ4~Φ16 mm; the other has a straight threaded connection in sizes including M5, M6, R1/8~R1/2 and G1/8~G1/2. They connect tubing directly to threaded ports on cylinders, solenoid valves and air preparation units. The bodies are typically made of nickel-plated brass or engineering plastic, with rubber seals for quick connection and disconnection and reliable sealing in standard industrial pneumatic circuits. Select a fitting by combining the tubing outside diameter ΦD with the required thread size. The catalog provides dimensions including ΦD1, ΦD2, L1, L2, O and width across flats φ to assist selection based on installation space and flow requirements.

KJH Series Male Thread Straight Fittings
KJH series male thread straight fittings are push-in pneumatic tube fittings with a male thread at one end, available in metric fine thread sizes including M3×0.5, M5×0.8, M6×1.0 and M8×1.0, as well as a 1/8" imperial thread. The push-in port at the other end accepts nylon or polyurethane tubing for quick connection and disconnection between pneumatic components and tubing. Common body sizes include KJH03, KJH23, KJH04 and KJH06, with different fitting lengths and hex widths across flats. The body is typically made of nickel-plated brass, and the release ring is available in gray, orange-red or black. These fittings connect tubing to threaded ports in various pneumatic control circuits.

TWAS Series Male Straight Fittings
The TWAS series consists of male straight pneumatic fittings that provide a push-to-connect tubing connection at a threaded port. One end has a metric or imperial thread (M3×0.5, M5×0.8, or 1/8, 1/4, 3/8, or 1/2 imperial tapered pipe thread), while tubing is inserted directly into the other end. The body has an external hex for wrench tightening in confined spaces. The catalog distinguishes specifications using the format “base model-connection thread-tube outer diameter.” The model tables list TWAS1201F, TWAS1211F, TWAS2201F, and TWAS3201F separately, providing parameters such as connection thread size, threaded section dimensions A/A1 and H, hex width across flats S, and overall fitting length L. This makes it easy to select a fitting based on installation space and tubing size. TWAS1201F and TWAS1211F use small M3 and M5 threads suitable for compact actuators; TWAS2201F and TWAS3201F cover 1/8–1/2 threads and accommodate 4–12mm tubing.

TO-PC-G Series Straight Male Thread Push-in Fittings
TO-PC-G series straight male thread push-in fittings connect pneumatic tubing directly to female threaded ports. They accommodate φ4 and φ6 tubing and are available with G1/8, G1/4, G3/8, G1/2 and G3/4 male threads. Models are distinguished by tubing outside diameter and thread size, such as TO-PC4-01G and TO-PC6-03G. The table lists overall and installation dimensions, including L1, H, S1, S2 and D1, to simplify selection and piping layout. The push-in design makes installation easy for automated equipment, pneumatic control cabinets and general industrial air lines.

TO-PC Series Straight Male Thread Fittings
TO-PC series straight male thread fittings connect metal tubes in a straight line to female threaded ports in pneumatic piping, enabling air supply distribution and actuator connections. They accommodate φ4, φ6, φ8, φ10, φ12, φ14, and φ16 metal tubes, with male thread sizes R1/8, R1/4, R3/8, R1/2, and R3/4. Model numbers use TO-PC as the series code, followed by tube diameter and thread size codes, as in TO-PC4-01 and TO-PC16-06. The table provides installation dimensions including L1 overall length, S1/S2 hex widths across flats, and H height, making it easier to plan piping layouts and check wrench clearance. Suitable for automation equipment, pneumatic control systems, and general industrial piping.

KQ2L Series Male Straight Fittings
The KQ2L series consists of male straight push-to-connect (one-touch) pneumatic fittings. One end has a male thread (M5×0.8, M6×1.0, or 1/8", 1/4", 3/8", 1/2" pipe thread) for connection to a female threaded port or actuator, while the other end accepts tubing directly for pneumatic connections and quick replacement. The body is typically made of nickel-plated brass, with nickel plating on the threaded section for corrosion resistance. An internal O-ring and retaining clip grip the tubing, providing a reliable seal and easy insertion and removal for frequent assembly and maintenance. The catalog lists sizes by tube outside diameter and fitting thread. Tube sizes start at Φ4, and the fitting hex width across flats ranges from 4~14.2 mm, increasing with fitting size. The related KQ2W is an extended male-thread type, while the KQ2E is a bulkhead fitting. Both belong to the same fitting family and can be used for panel pass-throughs or to extend the threaded connection. Select the model according to the tube outside diameter and port thread size. For bulkhead fittings, machine the mounting hole to the locknut nominal thread size + 0.5 mm.