Flexible Bearings for Harmonic Reducers

CSD Flexible Bearings for Harmonic Drive Reducers

CSD Flexible Bearings for Harmonic Drive Reducers

Flexible bearings for harmonic drive reducers are available in CSD, SHD and other configurations. The CSD type has one-piece inner and outer rings and the same outside diameter as the CSG type, but offers greater rigidity. It is used at the output of CSD series reducers. The SHD type has a one-piece toothed inner ring that meshes directly with the flexspline teeth. It is lower in height than the SHG and is used at the output of SHD series reducers. These thin-walled bearings deform elastically when fitted to a cam and are subjected to alternating stress. The inner and outer rings and rolling elements are made of high-carbon chromium bearing steel, and the cage is a one-piece nylon design. The catalog lists the dimensions of CSG(CSF)-14~-65 bearings (d, D, H, C, B, H2, D1, D2, d1, d2). The operating temperature range is -20℃~+80℃. The bearings are filled with lithium complex grease and preloaded before shipment.

Flexible Bearings for SHD Harmonic Reducers

Flexible Bearings for SHD Harmonic Reducers

Flexible bearings for SHD harmonic reducers feature one-piece outer and inner rings. The inner ring has teeth that mesh directly with the teeth on the flexspline. Their lower profile compared with the SHG type saves installation space, and they are primarily used at the output of SHD series reducers. The thin-walled flexible bearing is subject to alternating stress and deforms to a degree when fitted to the cam. The inner and outer rings and rolling elements are made of high-carbon chromium bearing steel, and the cage is a one-piece nylon design. The bearings are filled with high-quality lithium complex grease and preloaded before leaving the factory; no relubrication is required under normal operating conditions. The operating temperature is -20℃~+80℃, and aluminum alloy or cast iron is recommended for mating components. Consult the manufacturer if the required dimensions are not listed in the accompanying table or differ from those shown.

CSG(CSF) Flexible Bearings for Harmonic Reducers

CSG(CSF) Flexible Bearings for Harmonic Reducers

Flexible bearings for harmonic reducers are thin-walled flexible ball bearings designed primarily to withstand alternating stresses. Their thin walls undergo controlled elastic deformation when paired with an elliptical cam, driving the flexspline into periodic meshing engagement. They are core components of harmonic reducers. The inner and outer rings and rolling elements are made of high-carbon chromium bearing steel, while the cage is a one-piece nylon structure. Before shipment, trained assembly personnel adjust the preload and fill the bearing with high-quality lithium complex grease. No relubrication is required under normal operating conditions. Both the outer and inner rings are one-piece structures, and the outer diameter matches that of the CSG type. These bearings are mainly used at the output of CSD series reducers. The same series also includes variants such as the CSD type, which has one-piece inner and outer rings and a toothed inner ring that can mesh directly with the flexspline teeth. It has a lower height and is used at the output of SHD reducers. The bearing operating temperature range is -20℃~+80℃. Aluminum alloy or cast iron is recommended for mating components. Models are classified by reducer frame size (14, 17, 20, 25, 32, 40, 50, 65), with each frame size corresponding to specific dimensions such as d, D and H, and mounting hole positions.