Trapezoidal Tooth Timing Belt

AT10 Timing Belt
The AT10 is a Jiebao (Shenma Transmission) trapezoidal-tooth timing belt with a 10mm tooth pitch. Its model code is AT10-pitch length (in mm); for example, AT10-800 indicates a pitch length of 800mm and 80 teeth. Made from high-strength rubber with reinforcing tensile cords, it provides smooth, low-noise, slip-free operation without lubrication. It is suitable for medium- to high-torque synchronous drives in CNC machine tools, packaging machinery, printing equipment, automated production lines and similar applications. Common pitch lengths include 800, 890, 1210, 1280 and 1320mm, with tooth counts varying by pitch length. Belt widths can be selected using the specified codes, and special lengths can be customized to drawings.

MXL Series Timing Belts
MXL series timing belts are miniature imperial trapezoidal-tooth belts with a tooth pitch of 2.032 mm (0.08 in). They are commonly used in light-duty drives for office equipment, precision instruments, small motors, and similar applications. The model designation has three parts: the imperial pitch length code + MXL + the belt width code. For example, in 72 MXL 025, 72 is the pitch length code (in units of 0.1 in), and 025 indicates a belt width of 6.35 mm. These belts offer a consistent tooth profile, smooth operation, and low noise. They are compatible with a range of standard MXL pulleys and are available in various pitch length and width combinations.

XL Series Timing Belts
XL series timing belts are imperial trapezoidal-tooth belts with a pitch of 5.08 mm (0.2 inches). The model designation consists of a pitch length code followed by XL, with the number indicating pitch length in tenths of an inch. For example, 44XL has a pitch length of 4.4 inches (111.76 mm) and 22 teeth. The catalog covers 44XL to 600XL, with 22–324 teeth and pitch lengths of 111.76–1645.92 mm. These belts are suitable for light-duty applications such as office equipment, packaging machinery, textile machinery, and small drives. Belt width, pulleys, and flanges must be selected separately for the operating conditions.

L-Type Timing Belt
The L-type timing belt is an imperial trapezoidal-tooth belt with the tooth profile code L, commonly used in general industrial power transmission. Selection is based on the model, number of teeth, and pitch length. The L suffix denotes the L-type tooth profile, while the preceding number is the pitch length code. The catalog lists numerous sizes from 150L to 1580L, along with their corresponding tooth counts and pitch lengths. This series is suitable for applications requiring synchronous drive, low noise, and moderate load capacity, and can be used with matching L-type pulleys. Refer to the manufacturer's specifications for exact tooth counts and pitch lengths. Some values in the table may require verification due to missing decimal points or misaligned rows caused by OCR.

H Series Timing Belts
The H series consists of Shenma Transmission H-type timing belts, presented in the catalog with a tooth profile diagram and model table. These trapezoidal-tooth belts are available in standard models from 145H to 1000H, with 29~200 teeth and pitch lengths of 368.30~1630.20 mm. Model codes combine a pitch length designation with the H belt type identifier, as in 145H, 480H and 1000H. They are suitable for industrial drives requiring a constant transmission ratio, low noise and smooth operation. Select a model by tooth count and pitch length.

T5 timing belt
The JAGUAR T5 timing belt has trapezoidal teeth and a 5mm pitch. Designed for light- to medium-load synchronous drives, it is commonly paired with T5 timing pulleys and widely used in packaging machinery, printing equipment, office automation equipment, textile machinery, and various small drive mechanisms. The catalog uses the pitch length (mm) as the model suffix. Pitch lengths range from 150~1620mm, corresponding to 30~324 teeth, with the relationship: number of teeth = pitch length ÷ 5. The designation consists of the model (5mm pitch) + timing belt pitch length code (mm). Belt width is indicated separately by a width code; the code shown in the catalog is 10 (meaning a belt width of 10mm). These are standard products with short lead times and can be selected directly by pitch length, tooth count, and belt width. Other timing belt tooth profiles, including AT5 and AT10, are listed on the same page but are not part of this series.