Spindle Bearings

H Series Ultra-High-Speed Motorized Spindle Bearings (Steel Balls)
The H series comprises ultra-high-speed angular contact ball bearings for grinding and engraving/milling motorized spindles. Their internal parameters are analytically optimized to minimize rolling element slippage at high speeds. They are suitable for grease, oil mist, oil-air, and oil jet lubrication. The range includes the H70, H72, and H719 series, with contact angles of C (15°) or AC (25°). Rolling elements are steel balls (unmarked) or ceramic balls (HQ1). Cages are outer-ring-guided phenolic resin cages (unmarked) or inner-ring-guided polyamide resin cages (TN1). The high-precision series is available only in P4 and P2 grades and can be preloaded at constant pressure for high-speed and ultra-high-speed operation. The range covers bore diameters of 15~90mm. The table lists parameters including d, D, B, minimum chamfer r, rated dynamic/static loads, limiting speeds for grease/oil lubrication, and reference mass.

B Series Spindle Bearings (Steel Balls)
B series spindle bearings with steel balls are high-speed, high-precision bearings primarily used in motorized spindles for grinding, engraving and milling. Their internal parameters are specially optimized for motorized spindle applications, with low temperature rise under grease lubrication. The range includes the B70 and B72 series, with a 15° contact angle. Cage options are an outer-ring-guided cage for static grease lubrication (no designation) and a ball-guided PEEK cage (no designation). Rolling elements are steel balls (no designation) or ceramic balls (HQ1). The high-precision series is available only in P4 and P2 grades. These bearings are suitable for high and ultra-high speeds with constant-pressure preload, and can be lubricated with grease, oil mist or oil-air systems. Main dimensions: bore diameter 10mm to 90mm, outside diameter 26mm to 160mm, width 8mm to 30mm. Basic dynamic load rating: 3.0kN to 131.3kN. Limiting speed with grease lubrication: 8000 to 80000 r/min.