F-Type Lock Nut

XR-A Series Axial Locking Nuts

Type A uses a three-point axial locking method. Its thickness is the same as that of the F series, and it is suitable for demanding special environmental conditions. Applications: machine tool spindles, ball screw support bearings, precision spindles, precision measuring instruments, and more.

F-Series F-Type Locknuts

F-Series F-Type Locknuts

F-type locknuts feature a 30° locking steel design, do not withstand axial loads, and can be repeatedly disassembled and reassembled without losing precision. Made from 42CrMo steel, they have a hardness of HRC 28°–32° and an ISO 4H thread tolerance. Face runout is 0.002–0.005 mm for M12–M200 and 0.005–0.008 mm for M210–M450. Available in a range of metric thread sizes from M12 to M55, with pitches of 1.0, 1.5, and 2.0. Outer diameters range from 30 mm to 75 mm, heights from 14 mm to 22 mm, and inner diameters from 25 mm to 68 mm. Each nut has three locking steel elements and locking screws, with a maximum torque of 8–18 Nm. Suitable for precision machinery fastening, bearing locking, and similar applications.

XR-F Series Locking Nuts

XR-F Series Locking Nuts

F-type locking nuts feature a 30° thread design that prevents the locking interface from carrying axial loads applied to the threads. When the nut is tightened, the thread surfaces are not subjected to axial loads, and the nut does not deform. Tightening three nuts at intervals can be used to adjust the alignment of other components to be mounted on the shaft. Applications include machine-tool spindles, ball screw support bearings, precision spindles, and precision measuring instruments. This series is available in a range of metric fine-thread sizes, with diameters D of 38–105 mm and heights of 16–24 mm, and is suitable for high-precision axial positioning.

F-Series Lock Nuts

F-Series Lock Nuts

F-series lock nuts have the same thickness as Type A nuts and are suitable for machine-tool spindles, ball-screw support bearings, precision spindles, precision measuring equipment, and similar applications. They use an axial three-point locking mechanism, making them suitable for applications with special assembly constraints. Available materials include 42CrMo, 45 steel, and 40Cr. Thread tolerance: ISO 4H; hardness: HRC 28–32; face runout: ≤0.005 mm.