Clamp-Type Couplings

SPC Series Clamp-Type Couplings
The SPC Series Clamp-Type Coupling secures shafts with clamping screws and is available in standard (SPC) and stainless steel (SSPC) versions. Designed for connecting small-diameter shafts, it offers high rigidity and precision. The outer diameter ranges from 16 to 32 mm, and the length from 16 to 32 mm. The maximum bore diameter ranges from 6 to 16 mm for the standard version and from 6 to 8 mm for the stainless steel version. Rated torque is 0.3–10 N·m, and maximum speed is 19,000–39,000 rpm. Its single-sided clamping screw makes installation easy. It is suitable for precision drive systems using servo motors, stepper motors, and other equipment. During installation, avoid applying excessive loads to shafts with D-shaped flats.

SXI Series
SXI Series couplings are designed for installation on D-flat shafts. During installation, ensure that the shaft’s D-flat surface does not come into contact with the slit perpendicular to the shaft, as far as possible, to avoid damaging the coupling. Bore diameters range from 16 mm to 63 mm; see the technical specifications table for details. These couplings feature a clamping design and are suitable for high-precision power transmission applications.

SPDW Series Clamping-Bolt Couplings
SPDW Series Clamping-Bolt Couplings use a clamping-bolt fastening method and are suitable for precision power transmission. The range includes seven models (SPDW-19 to SPDW-50), with outer diameters of 19–50 mm, lengths of 27–57 mm, and bore diameters of 3–25 mm. Rated torque ranges from 1 to 16 N·m, maximum torque from 2 to 32 N·m, and maximum speed from 12,000 to 33,000 rpm. These couplings offer high rigidity and low inertia, and accommodate some parallel misalignment (0.12–0.15 mm), angular misalignment (1.5°), and axial misalignment (±0.2–±0.6 mm). Tightening torque ranges from 1 to 8 N·m. Made with stainless-steel screws, they are suitable for connecting shafts to servo motors, stepper motors, and similar equipment. A wide range of standard bore sizes accommodates various shaft diameters. Lightweight (15–215 g) and easy to install, they are widely used in automation equipment, machine tools, packaging machinery, and other applications.

SMC/SMI Series Clamp-Type Couplings
The SMC/SMI series clamp-type couplings are suitable for servo motors, stepper motors, general-purpose motors, and encoders. They offer zero backlash, high torque, and adjustable tolerance compensation. SMC is the clamp type, while SMI is the set-screw type. The body is made of 2024 aluminum alloy with an anodized finish. The clamp screws are made of SCM435 (SMC type), and the set screws are black-oxide treated, grade 12.9 (SMI type). Outer diameters range from 16 to 38 mm, lengths from 19 to 41 mm, and bore diameters from 3 to 16 mm, with various standard bore combinations available. Rated torque ranges from 0.5 to 6.3 N·m, and maximum speed from 10,000 to 20,000 rpm.